• Music Maker

  One answer, on 11/9/2013

  RE: USB mic delay
  Hi, If you are expecting music maker to behave as a DAW (digital audio workstation) such as Cakewalk, PreSonus Studio, Acoustica Mixcraft, Sony Acid Studio or any of the other DAWs out there, you have probably chosen the wrong product.  It was
• Movie Studio

  4 answers, most recent on 10/26/2013

  RE: recording not done through firewire (DV)
  Hi, Since you have camera control through Movie Edit, it seems like your Firewire ports are working and not blown. Can you check to see if you can capture any video using a free utility like WinDV (DV) or HDVSplit (HDV)? This would at least
• Movie Studio

  4 answers, most recent on 10/26/2013

  RE: recording not done through firewire (DV)
  Hi, On a FireWire card 2 ports available, one port is for INPUT and the other is for OUTPUT some card has a third one inside for INPUT. Check the port you need to use. Regards, YR sorry i can't resolve my problem
• Movie Studio

  4 answers, most recent on 10/26/2013

  RE: recording not done through firewire (DV)
  Hi sathe, I guess your PC has win7 OS? Then you may need to read Johnebaker's document: http://www.magix.info/us/resolving-windows-7-1394-firewire-transfer-to-comuter-button.online-training.691755.html Regards A
• Movie Studio

  4 answers, most recent on 10/26/2013

  RE: recording not done through firewire (DV)
  Hi, On a FireWire card 2 ports available, one port is for INPUT and the other is for OUTPUT some card has a third one inside for INPUT. Check the port you need to use. Regards, YR
• Movie Studio

  4 answers, most recent on 10/26/2013

  recording not done through firewire (DV)
  i can't record through DV but forword/rewind/play work properly but recording not done pls help    
• Movie Studio

  5 answers, most recent on 10/13/2013

  RE: Batch Recording MEP 2013 Plus
  Hi Can you control the camera with the DV transport controls shown below?   If you cannot control the camera fully then the  . . .  in the record dialog box . . Microsoft DV Camera & VCR . . . .  suggests you may have the wrong
• Movie Studio

  5 answers, most recent on 10/13/2013

  RE: Batch Recording MEP 2013 Plus
  John,   I have a SIIG DP FireWire 800 3-Port PCle for Windows 8. It has 2 Firewire 800 ports & 1 Firewire 400 port (which I'm using). I checked the drivers and they are all up to date. I'm not sure if this card is recognized by MEP (where
• Movie Studio

  5 answers, most recent on 10/13/2013

  RE: Batch Recording MEP 2013 Plus
  Hi  Which Firewire card do you have installed in the computer? Are the Firewire card drivers up to date? Is the Firewire card recognised by MEP? What options are you selecting in the record dialog for recording device? John  
• Movie Studio

  5 answers, most recent on 10/13/2013

  Batch Recording MEP 2013 Plus
  I'm having issues using the batch recording feature in MEP 2013 Plus. After I get my "recording list" set, I hit the record button, the software rewinds my DV camera tape to the first clip in the list start time, and then appears to start
• Off topic

  3 answers, most recent on 7/26/2013

  RE: Acquiring video from DVCAM
  Hi That depends on the outputs available on the DVCAM. If it has composite and audio outputs then you should be able to capture with the Grabby direct into MEP - you will have to start and stop plyback on the camera manually. If the camera
• Movie Studio

  10 answers, most recent on 7/19/2013

  Is it possible to copy the audio mixer settings to another movie within a project?
  I record a lot of guitar lessons in Movie Edit Pro Plus.  I'll start a new project and use an HD camera connected directly to the computer through firewire, while recording the sound with my Zoom R16.  Then I just take the SD card from the R16 and
• Movie Studio

  9 answers, most recent on 6/10/2013

  RE: MEP 2013 No recognizing old Sony HD Camera
  Hi Just o clarify Emmrecs is talking about the Firewire drivers (IEE1394) not the camera drivers - if you have the 64 bit Firewire driveres installed then you need to also install the legacy drivers, which are 32 bit, as well.  MEP should then
• Movie Studio

  9 answers, most recent on 6/10/2013

  RE: MEP 2013 No recognizing old Sony HD Camera
  I think the answer may lie in how you are connecting your camera to your computer.  On the U2U forum of another video editing software someone posted that they could not get that software to read HD video from their camera when connected via
• Movie Studio

  5 answers, most recent on 4/17/2013

  RE: Audio sync drift after capture
  Hi Gang...Just curious as to why MEP has such a hard time with this sort of capture when other software does not. 8mm video from a Sony video camera via firewire. Does anyone know? Regards...Bruce
• Movie Studio

  5 answers, most recent on 4/17/2013

  Audio sync drift after capture
  Hi Gang...I'm sure this has been asked a million time, but I did numerous searches and can't find anything relating to my particular problem. I'm capturing 2 hour 8mm video tapes from a Sony TR7000 video camera via firewire to my computer with MEP
• Music Maker

  One answer, on 3/26/2013

  RE: I have a tapco link.firewire audio interface how do i find it on MMM MX in order to use it
  Hi Is the Winows 8 OS 64 bit if so then see this tutorial - it refer to Windows 7 but the principle should be the same. HTH John
• Music Maker

  One answer, on 3/26/2013

  I have a tapco link.firewire audio interface how do i find it on MMM MX in order to use it
  I have a tapco link.firewire audio interface how do i find it on MMM MX in order to use it on Win 8 OS
• Samplitude

  2 answers, most recent on 3/8/2013

  RE: can channels on my mixer be assigned to same number channels on samplitude music studio mixer
  thank you , this was my problem ,i have a mackie pro fx 22 it was a usb 2x2 i/o , gonna pick up a mackie blackbird firewire interface to hook up to it! thank you for responding to the question . wesley
• Samplitude

  2 answers, most recent on 3/8/2013

  RE: can channels on my mixer be assigned to same number channels on samplitude music studio mixer
  In order to do this, your mixer must support multitrack recording over USB, FireWire, etc. Take a look at your mixer's manual to see if it supports multitrack recording. You may need to buy a different mixer or audio interface to accomplish this.
• Movie Studio

  9 answers, most recent on 2/9/2013

  RE: Why doesn't clicking in the Record button start the video "capture" procedure?
  Hi This soundslike a driver issue with the Canon DV camera, Win 7 does not have or recognises that the camera is a Canon and has installed generic Microsoft drivers - this would explain why Record == Stop on the camera - the wrong 'translated
• Movie Studio

  9 answers, most recent on 2/9/2013

  RE: Why doesn't clicking in the Record button start the video "capture" procedure?
  Hi Dabber. Thanks for those very full replies. My reason for asking about your OS was that Win 7 introduced a "new" Firewire (IEEE1394) driver that appears to actually work with nothing! Jeff Thanks for that Jeff, but the
• Movie Studio

  9 answers, most recent on 2/9/2013

  RE: Why doesn't clicking in the Record button start the video "capture" procedure?
  Hi Dabber. Thanks for those very full replies. My reason for asking about your OS was that Win 7 - I have Pro also and must say I think it's great(!!) - introduced a "new" Firewire (IEEE1394) driver that appears to actually work with nothing!
• Movie Studio

  9 answers, most recent on 2/9/2013

  RE: Why doesn't clicking in the Record button start the video "capture" procedure?
  Carl: Sorry, that was confusing. In my attempts to get the programme to record I tried a few times. Sometimes I could see the scene in the preview screen after I lined it up. At other times the screen was black and just turned off (went grey like