• SOUND FORGE

  2 answers, most recent on 6/27/2021

  RE: playback music full of static
  I use SFP-10 occasionally as well. but for the legacy UI, which I prefer for some types of work, Are files MP3? does the same behavior occur on PCM (.wav) files? I have seen reports of static on Dell PCs, I recall someone very recently posted a
• Samplitude

  4 answers, most recent on 6/25/2021

  RE: Set-up problem getting signal from external source to be recognised
  Thanks for your reply. I have clicked on Audio Setup within Samplitude but there is no Control Panel button. I have selected Advanced Options and Magix Low Latency 2016 is the selected driver. The Audio Devices tab shows the Audio Recording as HD
• Samplitude

  4 answers, most recent on 6/25/2021

  RE: Set-up problem getting signal from external source to be recognised
  @Ricadonna Have you clicked on the "Control Panel" button inside the Audio Setup menu and activated your devices for the Magix Low Latency Driver?
• Samplitude

  4 answers, most recent on 6/25/2021

  Set-up problem getting signal from external source to be recognised
  I have installed Samplitude (64 bit) (2021) on a 64 bit PC running Windows 10. The soundcard is a Realtek HD Audio. I have a microphone, Roland synth and guitar plugged into a 10 channel analog mixer, outputting to the line-in socket at the rear of
• SOUND FORGE

  15 answers, most recent on 6/22/2021

  RE: Hiss / white noise
  @rraud That must have been spell check that changed Magix to Magic... This audio device type is called "Magix Low Latency 2016". (I'm including a screen capture I took before the regedit.) I'm not sure why it doesn't show up in your registry. I'm
• SOUND FORGE

  15 answers, most recent on 6/22/2021

  RE: Hiss / white noise
  Thank-you @thouston for sharing the info. To clarify "Magic Low Latency 2016", is that Magic (as in tricks) or Magix (the GmbH company) ?Out of curiosity, I do not see that reg. entry my Dell XPS, nor have I experienced the noise issue.
• SOUND FORGE

  15 answers, most recent on 6/22/2021

  RE: Hiss / white noise
  @Hayley-Morrison So, I went back and forth with Magix support on this issue, and we were able to fix the white noise. There is an audio driver supplied with most Magix software called "Magic Low Latency 2016". You may have seen it in Sound Forge's
• Music Maker

  12 answers, most recent on 6/22/2021

  RE: Grid editor won’t place notes.
  I don’t believe there was an update in between it working and not working. Just one day I realized it wasn’t working. Before I would just be able to open a blank grid and place notes in but the notes won’t stay anymore. I’m using Magix music maker
• Music Maker

  4 answers, most recent on 6/20/2021

  RE: sound not working
  @L-S Hello. Please go into the program settings and look under Audio/MIDI which audio driver is selected. Usually it should be an ASIO driver (Magix Low Latency). You can then click on the "Advanced..." button to open the driver settings. You need
• Movie Studio

  30 answers, most recent on 6/22/2021

  RE: Error trying to use audio interface.
  @Alan-Bvid Hi Alan. Actually MEP and VPX use the Magix Low latency 2016 (V2.13) ASIO driver by default which is a version of the ASIO4All driver. As I'm using an inboard RealTek sound chip though that may make a difference. The settings can't be
• Music Maker

  6 answers, most recent on 6/10/2021

  RE: Sound Card (Realtek)
  Thanks for speedy response. I boot laptop up every day. As far as I can tell I have the latest drivers. Details from program:- Audio Playback, Magix Low Latency 2016 Out(1+2) ASIO Driver Magix Low Latency 2016   Buffer Number 4 Multitrack size
• Music Maker

  3 answers, most recent on 8/4/2021

  RE: No Sound
  @Steven-Vandross You need to set up the audio driver in the program settings. If you select Direct Sound you should get playback for audio loops. If you also want playback for MIDI loops and live recording you need to select ASIO. Music Maker offers
• Music Maker

  2 answers, most recent on 6/8/2021

  RE: I can't hear anything
  @jadan @Oceana Select an ASIO driver in the program settings (usually Magix Low Latency) and configure it to use your audio devices via the "Advanced..." button. Then it should work fine.
• Music Maker

  14 answers, most recent on 5/21/2021

  RE: Delay Issue
  @Brooke-Harvey You can try to decrease the delay by decreasing the buffer size inside the Magix Low Latency or ASIO4ALL driver settings and the Audio buffer size inside the program settings. Try something lower than 512 and 8192. This will need a
• Music Maker

  14 answers, most recent on 5/21/2021

  RE: Delay Issue
  @Brooke-Harvey Can you please make a screenshot of the driver settings window that opens if you click on the "Advanced..." button while your ASIO4All driver or Magix Low Latency driver is selected?
• Samplitude

  One answer, on 5/16/2021

  RE: Yes, this appears to work with samples, but it won’t work properly wit
  @Jason-Kristiansenl Hello. Magix Low Latency 2016 should work fine. Have you clicked on the "Settings" button and activated your Soundcard and it's inputs and outputs? Only then you'll get sound. I don't know what you mean with "USB Codec". A
• Samplitude

  One answer, on 5/16/2021

  Yes, this appears to work with samples, but it won’t work properly wit
  Yes, this appears to work with samples, but it won’t work properly with the MIDI Interface.  Although it’s registering the notes with the Magix low latency Asio 16 driver, there’s no sound, when recording or playback. I can only use a USB Codec,
• Music Maker

  13 answers, most recent on 5/15/2021

  RE: Unable to Record Instruments
  @Brooke-Harvey WASAPI will not give you the features you want. What do you see, if you select Magix Low Latency and click on "Advanced..."?
• Music Maker

  One answer, on 5/12/2021

  RE: Magix music maker audio problems
  @DeathTbh Hello! Usually you need to select an ASIO driver in the program settings. This driver needs to be selected if you want to work with audio + MIDI and hear the virtual instruments playing MIDI notes. The other drivers work fine if you just
• Music Maker

  8 answers, most recent on 5/11/2021

  RE: VST instruments
  @Viktor-Kniesz  You need to select an ASIO driver. Wave will not give sound when recording, only ASIO does that. A screenshot of your settings would be helpful. Maybe you have a new kind of sound chip. Some sound chips don't work well with Magix Low
• Music Maker

  One answer, on 5/9/2021

  I can't run other audio, while Magix Music Maker software is running
  I'm trying to play audio on iTunes, YouTube and other applications on my desktop. While simultaneously using my Magix music maker software, I payed $59.99 to update. Every time I run the software, an icon saying "Low Latency 2016 - Music Maker"
• Music Maker

  One answer, on 4/29/2021

  RE: No input audio detected on music maker 2017 premium steam edition
  @BUNNIE Is it an USB microphone? These are always problematic. Can you please make a screenshot of your audio settings in the program settings and your recording settings? Usually you would select an ASIO driver like Magix Low Latency and then
• Music Maker

  5 answers, most recent on 4/27/2021

  RE: Why software is crashing or freeze? i have a good setup!
  @Djhusmx Thanks. I looked up Avid Mixbox and the device and its drivers are very old which could be the cause for the instabilities but I'm not sure. If you change ASIO the drivers to Magix Low Latency and activate your Mixbox device and its inputs
• Music Maker

  2 answers, most recent on 4/18/2021

  RE: No sound from virtual keyboard
  @Frederic-Thompson Please go into the program settings and select an ASIO driver as your audio driver. Only if you select an ASIO driver you will be able to hear live input. This is how I set it up on my laptop. I selected an ASIO driver (Magix Low