• Samplitude

  One answer, on 1/25/2024

  Set up Presonus Faderport 8 in Samplitude Pro X6
  I just acquired a Presonus Faderport 8 and need to configure it in Samplitude Pro X6 on Windows 10 Pro. Which mode should it be set up in? Is it enough to choose the factory preset called Presonus Faderport (native) or are additional steps required?
• Samplitude

  One answer, on 4/8/2023

  RE: [Solved] VIta multichannel routing in mixer - how?
  @My-Yap Vita is a limited version of the Independence sampler. Independence has multiple outputs. Do you use Samplitude Pro? It comes with Independence included.
• Samplitude

  5 answers, most recent on 10/21/2023

  RE: [Solved] Cannot install initial add-on software, i.e. vst files
  @SP. and browj2 You guys rock! Thank you so much for your help! You nailed the problem. Once I check my logs in Win11 security (a bit paranoid for a default), it shows that it "protected" me by blocking Magix Samplitude from writing to the
• Samplitude

  7 answers, most recent on 12/29/2024

  RE: Playback along with audio stuttering every 1-3 seconds
  It can be problematic to use a wireless/USB device for recording/playback. I would recommend something that is connected via audio cable. DAWs like Samplitude record sample accurate. That's why you need a low latency connection. Unfortunately that
• SOUND FORGE

  8 answers, most recent on 11/13/2023

  SOUND FORGE PRO 16 SUITE vs SAMPLITUDE PRO X8 SUITE
  Anyone have any feedback about the key differentiators between Samplitude Pro X Suite and Sound Forge 16 Pro Suite.
• Video Pro X

  20 answers, most recent on 3/20/2024

  RE: ASIO drivers and audio handling in general.
  Yes, ASIO would be excellent to have in VPX, along with VST3 capability. I suggest that you raise this with Magix and on the Samplitude/Sequoia forum - with your friends at Magix who could possibly have some influence or help out making this come
• Samplitude

  2 answers, most recent on 4/25/2024

  Missing Download Content (VST, Soundpools etc.) with Samplitude X8
  Hello MAGIX forum, since I unfortunately couldn't find a solution through ticket processing within almost a week and there has been no answer until now in the german forum either, I hope to be able to find further help here in the english forum. I
• Samplitude

  4 answers, most recent on 3/31/2025

  Audio objects disappeared in Samplitude prox suite build 24222 64bit
  Hello friends Does anyone know why the The waveforms in the audio channels no longer appear in the project but are not heard either. How do I reverse this? The objects appear in the project options - project files menu but I don't know what to do to
• Samplitude

  5 answers, most recent on 1/25/2024

  RE: [Closed] how do i connect Akai mpk261 to pro x?
  Sorry that should be samplitude pro x8, yep it is the daw
• Samplitude

  No answers, created on 1/2/2024

  Issue embedding ISRC code in either Soundforge or Samplitude ProX8
  I have created .wav files of songs in both Samplitude 2023 & Samplitude ProX8 and mastered them with Soundforge 12 & 17. In all these programs, I can create CDs of the songs to review them, but when I try to embed the ISRC code it either
• Samplitude

  3 answers, most recent on 1/20/2024

  Soundpools
  Hello, I use Music maker a lot, but am now looking at something different. Samplitude looks promising but i cant find an answer to my question and the question is, can i use the soundpools i have purchased on music maker with samplitude?   Thanks
• Samplitude

  3 answers, most recent on 4/2/2024

  RE: No sound
  @Darren-McMaster-Smith Make sure you select the correct driver for your audio interface in the Samplitude Audio settings. Otherwise you won't see the outputs.
• Samplitude

  40 answers, most recent on 4/15/2025

  RE: Real Time Varispeed Sound Quality in Samp & WhichSound Forge Version?
  Okay, I loaded Samplitude ProX Suite and get the varispeed working. But when playing a WAV file no audio. I selected my laptop's RealTek audio (chip) and also hit Ctrl M , like it used to do in my 2008 version ProX Suite, which had the volume
• Samplitude

  5 answers, most recent on 1/14/2025

  RE: Why no Beatbox Pro in Samplitude?
  @Fhatuwani-Netshifhefhe Samplitude Pro has the older Beatbox 2 and additionally Loop Designer and Robota. Beatbox 2 has a lot more features compared to Beatbox Pro from Music Maker. You first need to install it via the Download instruments &
• Samplitude

  3 answers, most recent on 8/12/2024

  [Solved] How to change default crossfade length?
  You'd think I'd know by now, since this is/will be the fourth version of Samplitude I'll have purchased over the years (and always have adjusted the default crossfade). However, I can't remember how to do that -- I cannot recall how I go about
• SOUND FORGE

  15 answers, most recent on 9/20/2025

  RE: "Congested" Stereo Recording Repairable by Sound Forge?
  Might Spectral Layers be available as a plug-in to add to my old version of Samplitude Pro X? If Samplitude Pro X supports the ARA plug-in format, SLP can be opened as a plug-in. btw, SLP's 'Unmix' tools are automatic, so there is very little
• Samplitude

  3 answers, most recent on 11/1/2023

  [Solved] Samplitude 11 Producer won't open
  I know that it's an old program but I need it to open so that I can access songs. I see the following error message. "The program could not be started. It's possible that the installation folder is damaged. Reinstalling the program could remedy the
• Samplitude

  8 answers, most recent on 5/7/2024

  RE: Vocal tune
  @Anton-Kaptsev Hi I too do not have Samplitude Music Studio, however it looks like you are running the trial version, in which case, like other Magix programs, and by inference from the Samplitude Music Studio web page quote:- . . . . 'A free trial
• Samplitude

  3 answers, most recent on 11/16/2023

  RE: [Closed] iLok Activation code
  @biuro2 For what do you need an iLok dongle? Samplitude can use Codemeter dongles, as far as I know. Check in the Samplitude Help menu for the option to unlock the dongle.
• SOUND FORGE

  29 answers, most recent on 9/16/2025

  RE: SF 11 refuses to start, even full re install
  @daniel-DIAZ2990 It's likely they will say that this is a legacy software and they no longer support it. The current version is 18, not 11. If both Sound Forge Pro 11 and Samplitude Pro X3 suddenly had problems starting and now Sound Forge during
• Samplitude

  One answer, on 9/5/2024

  Upgrade Pro X8
  Hi. I own an old version of Samplitude Pro X3 Suite (64-Bit). I'm tempted to get the new offer for Pro X8 for $99.99. It is marked as an upgrade. How does that work? Will this give me a full version of Pro X8?
• Samplitude

  13 answers, most recent on 7/26/2024

  RE: Update/Patch for Samplitude Pro X8, Pro X8 Suite und Music Studio
  Greetings- I recently installed Samplitude Pro X 8 Suite, but it does not contain the Analog Modeling Suite as previous versions have. How may I locate and download this wonderful effects bundle?   Lance Miller
• Samplitude

  5 answers, most recent on 10/2/2023

  RE: I have missplaced my samplitudemusic studio 15 ,how can i download it and serial numbers/activation?
  Is there any way to download it and the numbers? Hi, as it an old posting, I suggest better contact Magix or use the link for samplitude forum https://www.magix.info/us/audio-forum/samplitude/ In the samplitude forum search for your question or post
• Samplitude

  12 answers, most recent on 12/14/2024

  RE: New update is available for Samplitude Pro X8 and Pro X8 Suite
  @jagad Yes, you can control your software activations in your customer account at Magix.com. You can activate two installations on two different systems at the same time. If you no longer need the activation on your old computer simply deactivate