• Movie Studio

  51 answers, most recent on 11/17/2023

  RE: MAGIX Movie Studio 2024 Platinum problems
  @AAProds HI Al . . . . The "problem" must be in the file header info . . . . Agreed - it has info in it that should not be there in the header and the file, ie stream 1 is a mp2 audio stream and is not standard for the .MTS file format As I said
• Video Pro X

  58 answers, most recent on 1/21/2024

  RE: Poor result on still image travelling
  Thanks guys ! I put all four video on an USB stick, then on my TV, a recent small LG OLED, model 2022, max 100Hz. They all show perfectly smooth movements !  Exactly what I was simply asking for. Nothing to do with what my computer displays! I'm
• Movie Studio

  17 answers, most recent on 4/7/2024

  RE: The AV1 codec
  @johnebaker @me_again Hi. Last time I looked VLC player did not support AV1 and I would think Media Player classic is too old and was last updated in 2017 as far as I can find out. Firefox was an early adopter but I think Edge also now supports AV1.
• Photostory

  2 answers, most recent on 11/29/2023

  Moving a Photostory finished project from a desktop to my laptop
  I created a large photostory project in Photosory 2023 version on my Dell desktop computer, has over 200 photos. I plan to use it at a party gathering this Sun Dec 3rd, to show on a big screen TV at a restaurant. I copied the MWV file from my
• Video Pro X

  4 answers, most recent on 11/12/2023

  RE: The exported movie is much lighter and pale
  @mike-eagle Hi . . . . In PotPlayer, and in Windows Media Player it is pale, but in Movies & TV it is OK . . . . In Windows settings, search for Colour Management, and check that sRGB IEC61966-2.1 is being used. and the monitor(s) is/are set to
• Movie Studio

  45 answers, most recent on 11/29/2023

  RE: Which version supports 4k video editing
  @johnebaker Both together is the standard designation for 3840 x 2160 16:9. But with resect to Magix video movie settings, each one is obviously different, as shown by the droplist in Movie Settings, and if you use a 4k ie 4096x2160 video for a 16:9
• Movie Studio

  45 answers, most recent on 11/29/2023

  RE: Which version supports 4k video editing
  @derek-brown Looking at 4k vs UHD, from what I can see, if UHD is exported as 4k, the picture is squashed horizontally in VLC Player and Virtual Dub. The image, when set to the height that shows no top/bottom bars, shows the sides well padded with
• Movie Studio

  13 answers, most recent on 3/1/2024

  RE: movie of stage show but on stage LCD screens cause movie flicker
  @spuddy13 Hi Brian. Large LCD screens were the bane of my my life when taking images for sports or event organisers. Quite often they are used to relay the event or give scores and are nearly always in view somewhere within a frame. It's a lot
• Movie Studio

  12 answers, most recent on 9/21/2023

  RE: Playback Magix Studio 2023
  @MarkAnders Two items of data strike me whilst quickly viewing your MediaInfo data, frame rate and audio sampling frequency. For Clipchamp the former is 30fps and the latter 44.1kHz; for MMS the former is 25fps and the latter 48kHz. Try exporting
• Other products

  5 answers, most recent on 3/6/2023

  Poor picture quality on an SD TV
  Hi, I have posted here in the past regarding poor picture quality on UKTV broadcasts on Freeview. I gathered that, because the programmes they show are SD, the poor quality was coming from the upscaling to the native resolution of my HDTV. So, as a
• Movie Studio

  17 answers, most recent on 6/13/2023

  RE: Progressive to Interlaced Question
  @jak.willis Hi. You can't de-interlace an already converted file from progressive. You could add it again but there would be little benefit to doing that. What you may be experiencing is a difference in screen refresh rates if you have an older TV
• Movie Studio

  21 answers, most recent on 9/28/2023

  RE: Hardware Encoding for MPEG-4 Export Stopped Working
  @Ronald-King Hi. That's very odd. I once lost the ability to play MPEG-4 files after a Windows update but the files would not play in Windows Film and TV either. I had to download a single MP4 wrapper but doing that is risky and doesn't always
• Movie Studio

  21 answers, most recent on 8/14/2023

  RE: MS2023: area outside of the viewable screen; change color
  @nhong-xiong Hi, The short answer is no, or at least I have never seen it. By viewable TV screen area, do you mean the settings under the top menu, Effects, Movie Effects Settings, TV cropping? If so, what are your settings? EDIT:Wrong answer
• Movie Studio

  17 answers, most recent on 6/13/2023

  RE: Progressive to Interlaced Question
  @jak.willis Hi. Looking at your last reply I think you would be better off using a screen recorder where you could at least match your monitors resolution and frame rate as well as the bit rate of the recording. Ray. Hi Ray, Yes, but I am watching
• Video Pro X

  111 answers, most recent on 1/29/2025

  RE: Feedback about VIDEO PRO X15
  @marcusdeman, @MAGIX_Redaktion, @browj2 Hi . . . . Exported video's don't follow the 9:16 ratio but instead it is 1:1 . . . . Confirmed for VPX 15 both h.264 and h.265 encoding formats. AVI exports and plays correctly. MediaInfo also indicates AR
• Video Pro X

  111 answers, most recent on 1/29/2025

  RE: Feedback about VIDEO PRO X15
  @marcusdeman, @MAGIX_Redaktion, @browj2 Hi . . . . Exported video's don't follow the 9:16 ratio but instead it is 1:1 . . . . Confirmed for VPX 15 both h.264 and h.265 encoding formats. AVI exports and plays correctly. MediaInfo also indicates AR
• Other products

  5 answers, most recent on 3/6/2023

  RE: Poor picture quality on an SD TV
  Hi, I have posted here in the past regarding poor picture quality on UKTV broadcasts on Freeview. I gathered that, because the programmes they show are SD, the poor quality was coming from the upscaling to the native resolution of my HDTV. So, as a
• Movie Studio

  12 answers, most recent on 8/28/2023

  RE: Size/Position/Rotation is registering a re-position as an animation
  @john-x Hi In addition to @CubeAce comment and . . . .gets rid of the border around the text (that restricts the text from going further). . . . . I believe the issue you are having moving the text to the edge of the screen is due to the Only use
• Photostory

  4 answers, most recent on 6/19/2023

  RE: How to see remove effect without removing the image?
  Hi, Thanks for your reply. I can't seem to remove the Old TV Border that I applied. It doesn't show up on the effect list. If I select the border on its own layer and delete it, the whole thing is removed along with the picture. The only thing that
• Other products

  5 answers, most recent on 3/6/2023

  RE: Poor picture quality on an SD TV
  @jak.willis Hi . . . . Freeview. I gathered that, because the programmes they show are SD . . . . Freeview channels are HD 1280 x 720 minimum and can go up to 4K UHD. The problem is anything you play on a DVD player is going to be restricted to 480p
• Video Pro X

  165 answers, most recent on 4/10/2025

  RE: [Closed] Website Observation
  @Reyfox Hi. It's easy to find what is used by various Film or large TV broadcasters and often it's more than a couple of editing programs, same as some of us, as one product doesn't often do everything or maybe as well. I know I'm preaching to the
• Movie Studio

  50 answers, most recent on 10/20/2023

  RE: Help selecting a new PC
  @CubeAce Yeah, I don't know exactly the tech but they put in a new fibre cable to my house, I am in the middle of Leeds so 'about how many people from a given location is viewing at the same time' might be considered, I rarely get the loading
• Movie Studio

  39 answers, most recent on 2/1/2024

  RE: Stereoscopic 3D Video Export Issue
  @vineethvarma-vegesna Hi. A couple of questions. When you reopen the export dialogue, does the export setting revert to Standard 2D as I am seeing? If you then use that export setting instead does it still export and work OK? Can you add the text
• Movie Studio

  21 answers, most recent on 8/14/2023

  RE: MS2023: area outside of the viewable screen; change color
  @Former user Ok Gid, I'll bite. How did you get the green background? I still think that it's something else that the OP wants because the image only shows text and the OP uses the term "viewable TV screen area." So, either the OP is referring to