• Movie Studio

  7 answers, most recent on 7/2/2019

  RE: [Closed] Keyboard Shortcuts in Movie Edit Pro?
  Can someone here help me with a short-cut? I use Ctrl-H a lot to open the audio track and use the Wave file to help me sync the video with other tracks. My problem is going back to simple track view. is there a short-cut to reverse the Ctrl-H
• Movie Studio

  59 answers, most recent on 3/7/2024

  RE: No Hardware Acceleration / Encoding
  Derek-Young, I built a new computer with an Intel i7-7700K 4.2 GHz processor, then overclocked it to 4.7 GHz. (It's water cooled) I also added 16 gig of DDR4 RAM, and a GTX 1050Ti SC GPU, with 4 gig of DDR5 RAM. This combination allows me to render
• Movie Studio

  49 answers, most recent on 5/28/2019

  RE: How to create distance in audio?
  @browj2 Hi John. Yup! Looking at Sequoia 15, certainly covers what I would consider being a Pro program for audiovisual use but as you say, is overkill for anyone not doing seriously paid work, or happens to have more money than sense 😉. This is why
• Movie Studio

  49 answers, most recent on 5/28/2019

  RE: How to create distance in audio?
  @FelixDunn Hi Felix. Using the Slider control is effectively the same as using the Drawing tool but not the same as using the Rotory control in the mixer. They all do the same job but only the Rotory Control in the mixer will physically appear to
• Movie Studio

  49 answers, most recent on 5/28/2019

  RE: How to create distance in audio?
  @FelixDunn Hi Felix. Using the Slider control is effectively the same as using the Drawing tool but not the same as using the Rotory control in the mixer. They all do the same job but only the Rotory Control in the mixer will physically appear to
• Movie Studio

  5 answers, most recent on 5/10/2019

  RE: Crossfades
  Hi John. Is there a way to control de timing of the cross fade? like adding keyframes to it? I was trying to do a karaoke effect (really for kids learning another language) I saw this post, but I need the whole phrase to show up, and change colours
• Movie Studio

  5 answers, most recent on 5/10/2019

  RE: Encoder delays video/advances audio out of sync MEP17
  John, I tried your suggestion although I was dubious that it would have any benefit. As best I remember, the audio stream is always two channels or more and that these options merely set flags in the frames to tell the decoder what to do with them.
• Movie Studio

  11 answers, most recent on 5/7/2019

  RE: Burn abort (encoder error) MEP17
  Isn't MEP17 incompatible with Windows 10? There are about 20 topics about this if you search the topic, including reports of burning problems. Peter In the searching I did, I saw that asserted for MEP17 and even some later versions. But it's not
• Movie Studio

  11 answers, most recent on 5/7/2019

  RE: Burn abort (encoder error) MEP17
  You are quite right when you highlight that line from the burn log about the Splitpoint. That was where I started from when attempting to analyse the problem: your project, as originally exported, is too large for a single-layer disc. Reducing the
• Movie Studio

  11 answers, most recent on 5/7/2019

  RE: Burn abort (encoder error) MEP17
  Hi again. Thanks for all the additional information. I think we need to take a step backwards here. You are quite right when you highlight that line from the burn log about the Splitpoint. That was where I started from when attempting to analyse
• Movie Studio

  5 answers, most recent on 5/10/2019

  Encoder delays video/advances audio out of sync MEP17
  This is a fork from the discussion Burn abort (encoder error) MEP17 in which system details were provided. The movie in question was assembled from 11 MTS HDTV files shot from a Sony camera. The files were assembled in sequence with minor edits,
• Movie Studio

  11 answers, most recent on 5/7/2019

  RE: Burn abort (encoder error) MEP17
  Hi again. Thanks for all the additional information. I need a lot of time to digest it all so may not be able to reply in any detail for some time! However, two things strike me about what you have shown: Your DVD writer can, apparently, not handle
• Samplitude

  11 answers, most recent on 4/25/2019

  RE: Interleaved Recording - Pro X4
  Hi again. Yes, all that makes perfect sense (and those Tascam recorders look very nice!) I assume you use two of them (to give the 16 tracks) presumably synced via the SMPTE Timecode ins and outs? How, exactly, do you transfer the audio files from
• Movie Studio

  8 answers, most recent on 4/12/2019

  RE: Hit a snag using Osmo Pocket with MEP/VPX
  I've seen this mentioned on the DJI site from other Osmo Pocket users. Some of the audio problems seem to come from which micro SD card spec you use so I tested if it happened with the highest spec cards I have which are well within the secified
• Movie Studio

  8 answers, most recent on 4/12/2019

  Hit a snag using Osmo Pocket with MEP/VPX
  I am trying out my DJI Osmo Pocket at HD and at Ultra-HD and am delighted with it. I'm not a blogger, and my long term use for this camera would be as part of my kit for multi-cam recording of concerts and lectures, presently done with a raft of
• Music Maker

  12 answers, most recent on 4/28/2020

  RE: Tech Support: "Your last registered product is too old. Buy voucher"?
  I'm having the same issue. I purchased MMPremium 2019 like a week ago at most. I ran into a problem installing iZotope and discovered that my product is too old and to buy a support ticket for $13 The problem is you need to completely log out of
• Movie Studio

  9 answers, most recent on 3/10/2019

  RE: Remix Agent - request for improvements
  @browj2 Thanks for the explanation, John. At least that sort of explains how you work with audio, although I'm still guessing a bit at this stage. My experience is probably different to your own and can easily look at a sound file and edit to the
• Movie Studio

  7 answers, most recent on 3/9/2019

  RE: Video is slightly lagging behind Audio
  @Michael-OCallaghan Hi Michael. The reason John is suggesting to use 'Create new frametable' is because it's like an edge number on old 35mm film giving each frame a postition on the timeline. It gives the program reading the file checkpoints to
• ACID

  71 answers, most recent on 7/10/2019

  RE: [Feedback] How do you like version 8.0.8.29 ?
  Great to have a light skin and be able to use 32 bit plug ins. This is all I asked for to be able to finally transfer to AP8 after all these years using AP7, so thank you! Next maybe also allow the tint on the tracks themselves to be made lighter as
• Movie Studio

  9 answers, most recent on 2/28/2019

  RE: Supplied music in the MEP free extras.
  @browj2 @johnebaker Thank you both for your continued information and support. John CB. I've been using Cubase since it's early days and I'm more comfortable working with it than the MEP mixer. It will handle MEP video exports and allow me to sync
• Movie Studio

  12 answers, most recent on 2/19/2019

  RE: Rotation of one video in a stereoscopic pair (bug?)
  Luker I've just done a quick 3D test (first time I've really played with 3D) and your problem DOES seem to be associated with my rotation problem already documented. Cropping / zooming rotated images for me is tricky, nigh on impossible for you and
• Movie Studio

  27 answers, most recent on 3/11/2021

  RE: the lack of compatibility of the sound with the image
  Hi, There are a few ways to make the adjustment: 1. This one may fix the problem right away - right-click on the video/audio object and select "Create (new) frame table." 2. If you can identify where the sound starts to go out of sync, cut the
• SOUND FORGE

  8 answers, most recent on 1/30/2019

  RE: Sound Forge 10 (PC) file save tasks that cause transcoding or don't...
  In audio, a different sample rate than what is it was recorded as causes faster or slower playback.Drift is always a problem, but usually only noticeable when the takes are long, but then sometimes you just get lucky. For perfect long term sync a
• Music Maker

  No answers, created on 1/12/2019

  Problems with getting individual tracks to be in time with each other
  I'm trying to record my own song by recording tracks for drums, bass, guitar and vocals. I've recorded a short drum sequence and then cut it into an object and copied and pasted the object to make a full length drum track. I then recorded the bass