• Samplitude

  One answer, on 2/8/2023

  RE: Audio playback while recording.
  @SirWilson-Brown Did it work correctly in the previous version you used? Have you compared the audio settings in both versions? You must select an ASIO driver in the system settings of Samplitude. The monitoring mode below the ASIO driver selection
• ACID

  2 answers, most recent on 1/30/2023

  RE: ACID Pro 10 compatibility with Tascam Model 12
  @Hamish-Mackintosh "If it doesn't, what does anyone suggest for syncing up as a mixer/controller/interface?" Answer: move to a DAW that supports Tascam Model 12. My original answer to your question was removed by the 'moderator' it was basically the
• ACID

  3 answers, most recent on 1/6/2023

  RE: Run Native Instruments Maschine Mikro III in AP10?
  @Allen-Taylor sad to say but it won't work in AP10.. neither will Kontakt 7 or EZD3, so you're SOL. but so is everyone using AP. Happy New Year   I run maschine Mk2 hardware to control AP10 ie. Start strop mixer faders mute solo etc ,this can then
• Music Maker

  17 answers, most recent on 9/16/2023

  RE: joining loops to make 1 loop
  @gjonny Hi, Further explanation after a coffee. The Op wanted to join the loops "so i can slowly make the volume of them lower as they are played." The objective was to be able to adjust the volume over the loops slowly, not join the loops. Joining
• Samplitude

  16 answers, most recent on 10/30/2022

  RE: Pro X7 - Only 2 Skins??
  hi everybody! i have been using magix since 2003. i just got a new computer with windows 11 on it. i took the hard drives out of my old computer and put them in a ssd reader... now the problem is the skins for the mixer.. the delay / feedback
• Samplitude

  16 answers, most recent on 10/30/2022

  RE: Pro X7 - Only 2 Skins??
  yesterday i uploaded 2004 and 2005 on this computer. im using 2004. but the problem is now i cant use the plug ins that i had on all of my songs. i dont like the mixers on 2015 2017 2020
• Movie Studio

  3 answers, most recent on 9/19/2023

  RE: Privacy blur / motion tracking
  @mike_w Hi, Here are a couple of different ways to do the blurring and more: However, some things, in particular, Size, Position, Rotation, as mentioned by John EB, have changed somewhat since I did these tutorials. For audio, Magix Movie Studio
• Movie Studio

  38 answers, most recent on 1/10/2023

  RE: Upgrade / Update?
  @johnebaker @jeff-brown8145 Hi John. I don't doubt it. In theory, any guitar amp that had a headphone output could be used to plug into a computers line input if it has one. The impedance difference would not be that great and if one is careful
• Video Pro X

  15 answers, most recent on 11/29/2023

  RE: GOYO Voice Separator Noise Reducer Plugin for VPX and Movie Studio
  @Scenestealer Hi Peter, As they say, people will more easily/readily watch a poor video with great audio than a great video with poor audio. How long should an image be shown on screen with no audio before one gets tired of seeing it. I use 3
• SOUND FORGE

  6 answers, most recent on 1/7/2023

  Music recording plays slower than original speed
  I have been recording music from a DJ app on an iPad through a Pioneer mixer into my HP laptop and recording using Sound Force 12.5. The laptop uses Windows 10. A common problem I have is that after recording a number of tracks perfectly, all of a
• Movie Studio

  31 answers, most recent on 6/27/2024

  RE: Where did my audio go?
  @Eric-Elliott Hi Eric . . . .  I can't do voiceover separately and then try to sync it up, that is impossible. I need to do it while the image or video is on screen otherwise I'm talking about apples while oranges are showing. . . . . . A change of
• Samplitude

  16 answers, most recent on 10/30/2022

  RE: Pro X7 - Only 2 Skins??
  yes. well aware. but i have the best mixes on earth using the plugins and mixer i been using. i have 2004 2005 2014 2015 2020 . i just thought the other ones were a waste of time to buy. i dont want to keep re-learning how to use a music program.
• Movie Studio

  15 answers, most recent on 3/24/2023

  RE: Recording Audio
  @browj2 @johnebaker @johnebaker @Promidi Hi John. (CB). I had never bothered to record mono before as it only shows the left channel recording but on trying it and playing back it appeared to be centralised in the mixer and not to the left. Good to
• Movie Studio

  39 answers, most recent on 8/12/2023

  RE: Movie Studio - Audio and Music Editor 3
  @browj2 Hi John. There are differences in the required distances for a given sound depending on the microphone used and what the microphone was primarily designed for as well as the acoustic surroundings. Regardless of using a luffs meter or not I
• Video Pro X

  148 answers, most recent on 4/18/2023

  RE: General discussion on add-ons
  @Reyfox, @ericlnz, @browj2 Hi . . . . We are getting a little OT from "add-ons" but anyway three comments. . . . . Bringing the topic back to "add-ons" - 2 are mentioned below 🙂 On the subject of Normalising, I am with John CB on this one. I no
• Music Maker

  4 answers, most recent on 10/15/2022

  Pan button not working
  Hello, Since version 31.0.1.13, the Pan button in the mixer remains grayed out and does not work. Thanks for your help.
• Movie Studio

  47 answers, most recent on 1/7/2023

  RE: sound issues
  @SSB Rewrite of my deleted post: AVIDemux will convert the 8 channels into stereo without re-encoding the video (ie fast): Open the file then Audio Menu>Select Track>tick track 1. On the left, at Audio Output, in the dropdown choose AAC
• ACID

  4 answers, most recent on 10/6/2022

  RE: Acid Pro 11 - How to undock Clip properties?
  @Redblur sorry that didn't work. From your other post I see you use a Laptop. (that answers my 2 monitor question) The reason I asked was I use 2 monitors and have my mixer on monitor 2. This is also where I nest SoftSynth Properties and if need be,
• Samplitude

  2 answers, most recent on 11/4/2022

  Changing the Track Name in the Mixer Window
  Has anyone else had this problem? When I try to change the track name while in the mixer window, for some reason Samplitude doesn't fully recognize I am trying to change the name of a track, and instead will use the keybinds associated with that
• ACID

  12 answers, most recent on 10/21/2022

  RE: No sound on soft synths
  @Robert-Joseph Hi, you may want to give a few more details about your set up i.e. what's the signal chain,computer Laptop or Desktop, are you using a mixer, analog or digital, ...talk to us, people will be happy to help, Cheers
• Music Maker

  4 answers, most recent on 10/15/2022

  RE: Pan button not working
  Hello, Since version 31.0.1.13, the Pan button in the mixer remains grayed out and does not work. Thanks for your help. Azzawolf is right, my pan button/knob is missing since update too ? Any ideas please?
• Music Maker

  8 answers, most recent on 10/1/2022

  RE: lost some features afterMusic Maker 31.0.13 update
  Found the fix for number 1. You can hide the pan buttons by clicking the word pan on the left of the mixer console.
• ACID

  11 answers, most recent on 4/21/2023

  RE: 0db master level? Boosting?
  Which Music Studio - Samplitude Music Studio or Acid Music Studio? My Samplitude Music Studio came with Ozone Elements which I believe is a mastering plugin. Also in the mixer view the master channels have a mastering suite button.
• Movie Studio

  45 answers, most recent on 2/2/2023

  RE: Timeline colour and selection
  @Mike-Yorkshire Hi, As you have surmised, Magix MS does not work like Vegas MS. The process is different. There are no track effects for videos/images. It is highly unlikely to ever have everything on a track need exactly the same effect(s). Having