Search the MAGIX Community for tutorials, questions and solutions as well as for forum members

Hi all. New user to the forum. With Movie Edit Pro 2017 (purchased online just a couple days ago) I am attempting to burn a project to DVD. The source video is a .mp4 video from a drone, saved on my hardrive. I'm using a Memorex DVD+R DL, 8.5

Other products

One answer, on 4/2/2008

RE: [Solved] how come i cant import DVD .vob files with audio

You need to make sure to enable the program to properly decode the Dolby Digital (AC3) audio that goes with most DVD source material.Depending on what generation of Magix video software you're using, this either requires the activation of the

Movie Studio

One answer, on 1/14/2008

RE: [Solved] Why does the audio get out of sync

Right click on the problematic MPEG material and select "Create (new) frame table" - usually that helps to put it all back into sync again.

Movie Studio

One answer, on 1/14/2008

[Solved] Why does the audio get out of sync

When I load an mpeg file into the MM Edit Pro 11 the audio is off by 2 - 5 seconds at different places in the movie. How do I prevent this, so I can actually edit and burn a DVD. At this point, the program isn't useful, because the sound doesn't

Movie Studio

21 answers, most recent on 9/28/2023

RE: Hardware Encoding for MPEG-4 Export Stopped Working

@Ronald-King Ron, are you exporting the same project? The encoding speed here depends on the file type you are editing/exporting from. From MP4 is fast, AVI/MPEG 2 is not as fast. I haven't noticed any change in export speed in the last few days (I

Movie Studio

19 answers, most recent on 6/24/2024

RE: Saving videos question (Saving YouTube vids to PC for later)

@Eric-Elliott Eric, of course. Just export them in MPEG-4 format. I think this was mentioned before, but just pick the bitrate that will give you the largest file size you can stand to upload. For example, you have a 1920x1080 video that is 10

Video Pro X

4 answers, most recent on 11/12/2023

RE: The exported movie is much lighter and pale

Yes, I'm viewing the final video using PotPlayer on the same PC and monitor where I edited the video in Video Pro X15. "Deactivate effects" was not selected. I checked it, but there is no change in the display view of the program. For exporting, I

Movie Studio

15 answers, most recent on 11/12/2025

RE: MPEG-4-Codec

I thought I had put the info my Profile under Signature. Ill have a look again. Here is the MediaInfo data for the firsts Video: GeneralComplete name : G:\Videos\Lin\On USB\2-054 Shib3 P1of2.MP4Format

Photostory

16 answers, most recent on 10/15/2025

RE: I've been using photostory for some time but now have hit bugs.

GeneralComplete name : F:\Materiaalvanaf2020\FilmmateriaalNoorwegen\18-09-2025\MAH01430.MP4Format : MPEG-4Format profile : Sony PSPCodec ID

Movie Studio

10 answers, most recent on 2/21/2025

RE: Bluray playback issues

@cocobacon Hi . . . . This all happened after the upgrade to Studio 2024. The problems have occurred on 3 different bluray players, all of different brands and ages. The only way I've been able to get back to playing is to eject the disc and

Audio Cleaning Lab

14 answers, most recent on 3/4/2025

RE: saving to MPEG 4

wow, well once again i do thank you for a your info! i'm sorry i'm so ignorant as to how to find all that tech info. you say would be good to see the media output of my source mp4 video. how do i find that info? i will upload it here .....ok, there

Movie Studio

19 answers, most recent on 6/24/2024

RE: Saving videos question (Saving YouTube vids to PC for later)

@Eric-Elliott Eric, of course. Just export them in MPEG-4 format. I think this was mentioned before, but just pick the bitrate that will give you the largest file size you can stand to upload. For example, you have a 1920x1080 video that is 10

Movie Studio

17 answers, most recent on 7/28/2024

RE: Issues with super fast videos or delayed audios

I just exported 3 GoPro clips as MPEG-4, took about 5mins to export 3 clips adding up to a 40sec project. this was the result, not as bad as one I dud yesterday but still not correct This is what the orig looks

Movie Studio

69 answers, most recent on 4/9/2024

RE: VHS captures, video "washed-out"

Hi @johnebaker These are the only two options I have on my computer. I guess if I had one of my capture dongles with me and plugged it in, the MPEG option would pop up. Its good to see that AVI is available since, as a container, it can hold a

Video Pro X

4 answers, most recent on 11/12/2023

The exported movie is much lighter and pale

Hello, I'm experiencing a problem. Yesterday, I bought Video Pro X15 and started editing a video. During the process, the colors displayed in the program looked great. I adjusted the brightness, hue-saturation, and contrast on some clips. When I

Movie Studio

87 answers, most recent on 4/27/2023

RE: Video replay speed faster than original loaded video

@CubeAce Ray, can you try disabling "MPEG Import Module" and see if it loads correctly in VPX 14 please - assuming it has the same or similar program settings as MS2023? This prevents the audio loading. "MPEG Import Module" will automatically be

Movie Studio

8 answers, most recent on 10/17/2023

RE: How to render with custom frame rate

@LoganTMT @CubeAce Well, there's certainly something crazy going on here (Magix MMS 2024). I set the movie settings frame rate to 59.67.and imported a 59.94 file. I tried to export to MPEG 4 (H264)at 59.67 and it ended up being twice as long,

Movie Studio

46 answers, most recent on 4/10/2025

RE: Stereo not supported - burning disc

Thank you for all your information. To answer some of the points in the last few messages. My previous computer I used Movie Magix 2014 which I had no problems with. I ungraded my computer which is now windows 11 and installed Movie Studio 2024

Movie Studio

10 answers, most recent on 2/21/2025

Bluray playback issues

Greetings, Magix family. I have an issue I'm hoping someone has a solution for. I upgraded from Movie Edit Pro 2019 to Movie Studio 2024 in March 2024. After the upgrade, I've been having playback issues with my bluray discs. The problem: when I

Video Pro X

46 answers, most recent on 1/16/2024

RE: VPX15, no hardware encoding during BD burning

I just tried making the BD project with the MPEG-2 setting in stead of h.264. I get normal Hardware Encoding that way but the compression is bad and the color information is downright ugly, like a gremlin that crawled out of the sewers... I will for

Movie Studio

9 answers, most recent on 12/24/2023

RE: Cant use MP4 files on timeline

Gents, surely the issue is not the types of file but the broken MPEG 4 import activation? I'd bet that all those files are AVC and ordinarily readable by Magix, so the holdup is the activation. @Crunch_Moment Try a program reset:

Movie Studio

26 answers, most recent on 1/17/2025

RE: Blu ray disk chapters blank

@karataka Hi We need more information: Movie Studio version and patch number - see under Help, About... which disk template was used for creating the disk? Can post screenshots of the following: the timeline, we need to see the entire length of

Movie Studio

10 answers, most recent on 5/23/2024

RE: Guidance for Sony cameras outputting MXF containers w/ XAVC

@emptech Hi . . . . I'm sure this isn't the place to ask but have to start somewhere . . . . Yes and no. You are in the correct forum, however have hijacked another users' topic which relates to Sony cameras. Please do not hijack another users

Movie Studio

17 answers, most recent on 7/28/2024

RE: Issues with super fast videos or delayed audios

@rbritz1970 Hi, I'm testing something at the moment, but yes stick to HEVC for your clips, you personally won't notice the difference, This is your MP4 HEVC MediaInfo in the comment earlier This is what an AVC MP4 would look like Essentially they