• Video Pro X

  31 answers, most recent on 3/11/2022

  RE: Noise / grain on upload
  @AAProds Hi Alwyn Funny you should say that - I have just finished reading an article which goes into how to force VP9 encoding, the conclusion was the video resolution needs to be 4K 2160p minimum. The older tricks, eg bitrate, All-Intra,
• Video Pro X

  31 answers, most recent on 3/11/2022

  RE: Noise / grain on upload
  @AAProds Hi Al. I have deleted that unused export file from my system as I deleted it from YouTube when the other file encoded with less differences. I can and will if you wish re-render the file tomorrow and give you the two sets of MediaInfo data.
• Video Pro X

  31 answers, most recent on 3/11/2022

  RE: Noise / grain on upload
  @AAProds Hi Al. I was intending to add additional information as to why sometimes even trying to enforce a VP9 encoding sometimes still does not give desired results and possible solutions as to the next steps that can be taken to reduce possible
• Video Pro X

  31 answers, most recent on 3/11/2022

  RE: Noise / grain on upload
  @AAProds @Hamid-Bilverdy Hi Al. It is my recent experience that only the 4K viewed version gets the VP9 codec and lower resolutions are still shown using avc for at least a week before they finally get encoded to VP9. To keep the average bit rate
• MAGIX

  No answers, created on 3/7/2022

  [Closed] SOUND FORGE Pro 16 - Audio Editing Solution for Professionals
  Dear community, Since Audio Studio has already been updated, it's the Pro Version's turn now! Your creativity has top priority with the new SOUND FORGE Pro 16 and SOUND FORGE Pro 16 Suite. We focused on developing a new dynamic workflow to help you
• Movie Studio

  10 answers, most recent on 3/5/2022

  Program Requires Extra Component - MPEG2 Codec MainConcept
  Hi Gang For experimentation, I've switched camcorders - trying to get MEP2016 Plus to recognize a similiar Panasonic Camcorder. This one is a Panasonic AG-HVX200K P2 Older HD Camcorder (Limited to 1080). Not surprisingly I recieved the prompt
• Movie Studio

  11 answers, most recent on 4/6/2024

  RE: Export 4K Vertical movie by movie studio 2022 platinum
  @patheera Hi . . . .  4K vertical video (2160 x 3840 resolution) . . . . Although i can set my project at 2160x3840 9:16 the export will only allow 1080x1920 9:16 . . . . The best you can do for h.264/AVC (MP4) is 1800 x 3200 resolution - however
• Video Pro X

  4 answers, most recent on 3/2/2022

  VPX13 Viewing, Playback and Export Problems
  Hi, VPX13 v. 19.0.2.150 As you can see from my signature, I have what I consider to be a very high-end machine. Using the same 1920x1080 video clips that I have been using for my examples and tutorials for years now, I can easily get VPX13 (and
• Video Pro X

  22 answers, most recent on 3/2/2022

  RE: Wich CPU, Graphic card for VPX 13?
  @AAProds Hi . . . . Out of interest and I know it's very subjective, what encoding times are you getting? 2 times, 5 times better than the movie time assuming a basic movie . . . It is as you say very subjective and subject to defining the
• Video Pro X

  22 answers, most recent on 3/2/2022

  RE: Wich CPU, Graphic card for VPX 13?
  @Reyfox Hi The ideal situation with respect to GPU's is having an Intel IGPU preferably a UHD 630 or higher and  a Nvidia GTX 1050, preferably better, or an AMD GPU RX470 or better. @CubeAce  . . . . NVENC which is really only a concern if using
• Video Pro X

  22 answers, most recent on 3/2/2022

  RE: Wich CPU, Graphic card for VPX 13?
  I'm getting good results with my 2 custom PCs (specs are several years old now): - i9 9900k with AMD RX580 8GB - i7 9700k with AMD RX540 (4 or 8GB). It all depends on how many tracks, effects, etc. But for my simple to moderate purposes, these work
• Movie Studio

  34 answers, most recent on 2/28/2022

  RE: Stops working after udate
  @Wengsman @johnebaker @ericlnz @emmrecs @AAProds Hi. It clearly states on the box that it is compatible with Windows 7/8/10. This is why I bought it.   The box if it states that would be correct and that version is clearly running all be it not
• Movie Studio

  43 answers, most recent on 2/26/2022

  MEP 2022 Importing MOV file Issues
  Greetings all! Using MEP2022 Plus. I've imported a series of MOV wrapped UHD 4K 24P 4:2:2 files to be edited and used. Camera is Panasonic G9. It seems that some of the video files have the appropriate thumbnail representations, while others do not
• Movie Studio

  48 answers, most recent on 2/25/2022

  RE: No 4K Icon Thumbnails and poor playback.
  Thanks, I may try that and let you know here. I'm away for a short while at the moment. Thanks again, Phil. @hatfieldphoto Hi, If you like you can put one of the files in a zipped folder, open Google, go to the top right corner there's a little sq
• Movie Studio

  48 answers, most recent on 2/25/2022

  RE: No 4K Icon Thumbnails and poor playback.
  @CubeAce Thanks, a lot of this is beyond me but i take as a learning opportunity 🤯😁👍 I downloaded the bottom one of those files on that link, MediaInfo tells me this . GeneralComplete name                            : D:\desk stuff\Nvidia screen
• Movie Studio

  48 answers, most recent on 2/25/2022

  RE: No 4K Icon Thumbnails and poor playback.
  @hatfieldphoto Hi, If you like you can put one of the files in a zipped folder, open Google, go to the top right corner there's a little sq made of dots, click it & open Google Drive, drag the zipped folder in there, right click the folder when
• Movie Studio

  21 answers, most recent on 2/23/2022

  RE: Am I using MXV files incorrectly.
  @CubeAce yeah i used 4k, that's what i normally use but i thought because like you say i have a bit more memory i'd give it a bit more to work on & i wasn't really thinking, .. my pc memory that is 👴😂 2.49mins of assorted HD 1920x1080 clips,
• Movie Studio

  21 answers, most recent on 2/23/2022

  RE: Am I using MXV files incorrectly.
  @CubeAce I can't help with the tech, but i thought i'd give this a go, This is a 25min 4k 3840x2160 project of random clips i keep for 'testing' I know MEP exports this i mpeg-4 in about 5-6mins, no fx's added to start. This is exporting in mxv,
• Movie Studio

  43 answers, most recent on 2/15/2022

  RE: Does MEP offer the feature of adding 'boxing-arena' style light flare?
  I normally film in what my phone calls 4k 3840x2160, but this is one i forgot to turn it back from 8k after trying it out, I don't use 8k, partly because it's unnecessary for Youtube but also because the wide angle doesn't work in 8k, i tend to film
• Movie Studio

  43 answers, most recent on 2/15/2022

  RE: Does MEP offer the feature of adding 'boxing-arena' style light flare?
  @CubeAce I've an old GoPro for when i want to look ridiculous & put it on my head when filming my work, viewing from my point of view, through my eyes sort of thing, that's basic H.264 AVC & my phone camera, Samsung Galaxy S21 Ultra, up to
• Movie Studio

  43 answers, most recent on 2/15/2022

  RE: Does MEP offer the feature of adding 'boxing-arena' style light flare?
  @Former user Hi Gid. Bit rate                                 : 1 057 Mb/s That's an incredibly large bit rate for a 4K video file. If it is a UHD file I can't play some of those. Like files from Black Magic cameras. I doubt my drives even work at
• Movie Studio

  22 answers, most recent on 2/13/2022

  RE: Portrait clip on top of portrait clip, Size/Position/Rotation is weird
  @CubeAce @browj2 I think some of you know a little while ago i moved to Vegas because i wanted a better plugin to track my van number plate so i could mask/blur it out in my YT vids, I think it was one of you two that introduced me to Boris, thanks,
• Movie Studio

  15 answers, most recent on 2/10/2022

  RE: Program jam
  @Kalevi-Kotamaeki What is the resolution of the project you are working on? Why have you put GTX 1050 Ti, 1 GB VRAM When it is a 4GB card and capable of handling Direct X 12? The Intel 9-9900K should also have an inboard HD 630 graphics chip. Are
• Movie Studio

  21 answers, most recent on 2/10/2022

  RE: Why does my timeline mode look weird?!? Need help ASAP please!
  Back with 2nd update. Thank you all for your quick respones and your tips!   I took some of your advice and made a google doc so that you can take a look at some screenshot of what the problem is. Here's the