• Movie Studio

  15 answers, most recent on 5/2/2020

  RE: vhs capture with green line at bottom
  Its the trailer for Virtuosity 1995 so the sound would be shoot em up levels. I've got another VCR with vu meters so i'll break it out and compare the levels tomorrow to see if it's loud or quiet. I've heard many Pre recorded loud soundtracks so
• Movie Studio

  15 answers, most recent on 5/2/2020

  RE: vhs capture with green line at bottom
  @mark-perry Hi From your previous statement . . . . Kaiser was way into it red with no medium or low levels at all . . . . The Kaiserbaas audio levels look fine - they are just peaking into the the red and appear to be just getting to 0dB this is
• Movie Studio

  15 answers, most recent on 5/2/2020

  RE: vhs capture with green line at bottom
  Tape was always wound back to start. In tape drawers and not stacked on each other. Neutral climate but stored away from direct light and heat etc... I'd rate the Kaiser a candidate for crimes of promotng the Loudness war it was just unworkable. The
• Movie Studio

  15 answers, most recent on 5/2/2020

  RE: vhs capture with green line at bottom
  TV signal was OK, small FM outdoor just below hill 40 km East from Hobart just get rid of a hill 1km and it's direct line of sight so that's why the picture grab probably looks grubby to your
• Movie Studio

  15 answers, most recent on 5/2/2020

  vhs capture with green line at bottom
  screen capture https://ibb.co/RY6w1Xx i'm doing a vhs capture with a Vidbox NW03 but it always has a green thin line at bottom edge of the picture. so while thinking should i get another device, i tried another device i had a Kaiserbaas KB401-01 and
• Movie Studio

  18 answers, most recent on 5/1/2020

  RE: Any outstanding bugs/things need to be fixed in MEP 2020?
  @browj2 The animation at 50fps is a 506 frame clip giving one complete rotation of the object. They have to be placed together to form the complete rotation of the object throughout. The clip is of the object with a white background (A black
• ACID

  2 answers, most recent on 4/29/2020

  RE: definition of rendering vs mastering
  Hi @m-f7644 Welcome to the Acid Forums! Mastering tends to mean preparing your audio for ideal EQ, Loudness, balance, etc and is more the a process or artform to go through. You can do all of this in Acid with the right thought about your track as
• Movie Studio

  18 answers, most recent on 5/1/2020

  RE: Any outstanding bugs/things need to be fixed in MEP 2020?
  As the title of this thread is about bugs, I have tried to keep up the bug list for VPX and I gave up on MEP when it went to 2020 but I did not. However, many of the bugs are the same in VPX as in MEP. If anyone wants the doc file of the bug list
• Movie Studio

  60 answers, most recent on 7/21/2020

  RE: Movie Edit Pro Plus - how do I add 3rd party VST FX?
  @CubeAce Hi Ray, Strange. Can you download and install the free version of YouLean Meter 2 from the website, both 32 and 64 bits, locate where it gets installed to in the 64 bit, and navigate to that folder with the VSTplugin installer in MEP?
• SOUND FORGE

  7 answers, most recent on 4/21/2020

  RE: Using Soundforge 12 to rip sound from DVD playback?
  Thanks for your reply. I upgraded to SFpro14 and then followed your instructions, with the same result: the software is successfully trying to record, but without any of the actual sound coming thru to be recorded (the recording waveform in SFpro14
• Video Pro X

  9 answers, most recent on 4/16/2020

  RE: VPX Setting, Adjusting and Analyzing Loudness - Plugins
  @Craigster Hi, The YouLean meter only measures, it's not a Limiter. I suggest that you look at their web site and this . For me, the graph is the main feature. I can see clearly parts that are too loud and also locate points where the max loudness
• Video Pro X

  9 answers, most recent on 4/16/2020

  RE: VPX Setting, Adjusting and Analyzing Loudness - Plugins
  @Craigster Hi Craig, Yes, I have Samplitude Pro X3 Suite. I took a look at the Loudness Meter and there is no graph, only the readout, so the two other tools would be helpful. The YouLean Meter can be adjusted to the desired level with the paid-for
• Movie Studio

  2 answers, most recent on 4/12/2020

  RE: Annoying interference/flickering noise after exporting movie
  Hey Metallica! No audio FX applied to the clip. Only reduced the volume level in some videos as they were too loud, compared to the main voice. Here is a link of the previous video i recorded with no problem at all. I´ll try with the mastering
• Video Pro X

  9 answers, most recent on 4/16/2020

  RE: VPX Setting, Adjusting and Analyzing Loudness - Plugins
  Just thought that I would update this as I replied to a user on the French forum about how to get fairly even perceived levels from one audio recording to another, mainly with songs. Using MEP2019, in the image below I have two Magix audio files.
• Movie Studio

  7 answers, most recent on 4/9/2020

  RE: Magix movie edit pro 2020 record screen with sound?
  @Former user Hi Gid.   Looking at the video I only saw you check the playback settings. Not the record. As for the record levels. You will have to turn them up as much as needed or the resulting sound may be very noisy. I know the volume jumps up a
• Movie Studio

  132 answers, most recent on 8/25/2020

  RE: 36 Hours of Testing MEP Premier Settings For Playback and Export.
  @Scenestealer @johnebaker @pmikep [Edit] If you read this earlier please re-read. I got one bit of information wrong earlier. Sorry. Just for information sake I have Both monitors running separately. One to each GPU. I am finding after further tests
• Music Maker

  3 answers, most recent on 4/5/2020

  Music Maker Audio Issues
  I only just got Music Maker, so I'm not sure how things work, but I'm having issues with audio either being completely silent or deafeningly loud. I put a bass loop on the track and hit play: if I'm using the DirectSound driver I get the error '
• Movie Studio

  28 answers, most recent on 3/28/2020

  RE: Moving/slotting images and transitions in Timeline Mode
  @FF22 Unless you have a simple project with mostly just photos, no music, no overlays (PiP), few titles, do not use Storyboard mode, use Timeline mode. You have to be able to see what you are editing. I have audio and video on separate tracks. I
• SOUND FORGE

  18 answers, most recent on 3/22/2020

  RE: Sound Forge 6.0 has stopped working
  Statistics take longer because loudness data in now measured. Good for 'integrated' LK measurement ( and significantly faster than real-time). I use it a lot, but It would be nice to have the option to shut off that parameter if it is not needed.
• Movie Studio

  2 answers, most recent on 3/16/2020

  RE: It won't download.
  @Thurman-Jenner Hi . . . . Oh for crying out loud... I just found out what country AE is. AE is the two-letter country abbreviation for United Arab Emirates. So now what? . . . . There is a trick to reading URLs correctly to find where it is
• Movie Studio

  2 answers, most recent on 3/16/2020

  It won't download.
  When I launch movieeditproplus2020_dlm it tells me to wait for the download to complete and stalls at 0%. After a period, it times out and prompts a continue button, but this just makes it loop doing the same thing. It never gets past the 0%.I have
• Video Pro X

  9 answers, most recent on 4/16/2020

  RE: VPX Setting, Adjusting and Analyzing Loudness - Plugins
  Below shows the peaks after normalizing to full level in SFACL: Integrated level is now -19.2 LUFS, TP = 0.0 dB. The warning level was set to -1.0 dB so I can now locate the peaks and fix them if I want to get the higher overall level. Below shows
• Video Pro X

  9 answers, most recent on 4/16/2020

  RE: VPX Setting, Adjusting and Analyzing Loudness - Plugins
  @Craigster Hi Craig, Yes, I have Samplitude Pro X3 Suite. I took a look at the Loudness Meter and there is no graph, only the readout, so the two other tools would be helpful. The YouLean Meter can be adjusted to the desired level with the paid-for
• Video Pro X

  9 answers, most recent on 4/16/2020

  RE: VPX Setting, Adjusting and Analyzing Loudness - Plugins
  Hi Ray, Didn't you read the first paragraph that I forgot to include? No? Then I had better add it. I finished a video last week that contains a lot of narration and music from different sources. I had a lot of trouble balancing the loudness to get