• SOUND FORGE

  2 answers, most recent on 1/29/2020

  RE: Issue starting Soundforge
  The SF elevated privileges issue is/was relatively common with SF 10 and 11 (Pro and AS) after a Win 10 update(s), though issues of this kind with later Magix versions are few. As my fellow moderator Jeff stated, read the elevated privileges thread
• Video Pro X

  6 answers, most recent on 1/15/2020

  RE: VPX11 - Luminance, RGB curve, Brightness, Contrast, Gamma
  @browj2 Hi John Brightness It is useful to look at the controls in MEP as being like the traditional controls on a TV or monitor. Brightness is used to raise the black level primarily. Contrast is used to raise the white level primarily and with
• Video Pro X

  6 answers, most recent on 1/15/2020

  RE: VPX11 - Luminance, RGB curve, Brightness, Contrast, Gamma
  @CubeAce For those who do not have VPX but have NB ColorFast 2, here is an image with the Waveform turned on in ColorFast and the Brightness adjusted upwards under Primary Correction. Note that Brightness under ColorFast 2 does not do the same thing
• Video Pro X

  6 answers, most recent on 1/15/2020

  RE: VPX11 - Luminance, RGB curve, Brightness, Contrast, Gamma
  @CubeAce Hi Ray, As I indicated in the other thread, here is what happens to the image in the snow when I raise the luminance using the RGB curve" Before: After with the top of the RGB curve moved to X=170.3. That is, input = 170.3, output =
• Movie Studio

  38 answers, most recent on 3/29/2020

  RE: compatability with windows 10
  @Andrew-Thompson Hi Andrew. Exporting to MP4 or whatever file type you need is best kept to the project sizes which it turn should be set to be the same as the file types being imported into the project. So basically the same settings as you record
• Photostory

  7 answers, most recent on 1/5/2020

  RE: Photostory Deluxe 2019 encoding query
  Just an update Jeff. Since my last message I've tweaked my project a little so that it's now 20.56GB and lasts 1h25m34s. Last week I had an SSD installed on my laptop thinking that this may speed up the burning process, along with other
• Music Maker

  8 answers, most recent on 6/2/2020

  RE: Newbie .... need help with adding VST synths MMM 2020 ( Premium )
  Just a little update.....   Have spent quite some time researching, downloading and testing a number of VSTi's and have come up with a list of those that I think are really good.   These may be "old news" to many of the guys here on the forums but
• SOUND FORGE

  3 answers, most recent on 12/24/2019

  RE: Sound Forge 10 no longer runs correctly on my system for some reason
  Happy Holidays and welcome to the Sound Forge forum @Xeoneex. This elevated privileges thread may be of interest.Just two days ago I had to perform the elevated privileges registry tweak for the umpteenth time on SF Pro 10. I have done it so many
• SOUND FORGE

  4 answers, most recent on 6/16/2020

  RE: Corrupted download?
  Does the "soundforgepro10.0.507.exe" installation file download normally? I do not recall other embedded installers aside from the older .Net framework (needed), SF Pro 10 <.exe> installer and NR-2.0. I think the iZotope (Direct X) 'Mastering
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @browj2 @johnebaker Update on foolish things not to do. I managed to download the Asus 'Crate' package with all the tools to overclock and tweak various programs that ended with me making MEP inoperable. I even managed to get locked out of my PC
• Music Maker

  8 answers, most recent on 6/2/2020

  RE: Newbie .... need help with adding VST synths MMM 2020 ( Premium )
  @Steven-Wood Hi Steve . . . . can you recommend any others or good sources of decent VSTs . . . . I have several DSK instrument VST's which are free and many of them are very good, a few are not so good. There are many other free instrument and
• Movie Studio

  30 answers, most recent on 11/30/2019

  RE: No hardware encoding with Intel HD 530
  @Scenestealer Hi Peter. I found that clip that I remembered gave me banding in the past so I re-exported the video using HEVC and 'Best' with the "Use Dithering for Output" ticked. and the result still gave banding. Only setting the project to have
• Movie Studio

  30 answers, most recent on 11/30/2019

  RE: No hardware encoding with Intel HD 530
  It is puzzling. I'm never sure if I'm learning more as I go along or just getting more confused 😀 but I test each time I see some new information here and see if there are either visible improvement differences or performance variations in use. Do
• Movie Studio

  30 answers, most recent on 11/30/2019

  RE: No hardware encoding with Intel HD 530
  @Scenestealer Hi Peter. .but this does not explain why @johnebaker has two choices? It is puzzling. I'm never sure if I'm learning more as I go along or just getting more confused 😀 but I test each time I see some new information here and see if
• Movie Studio

  31 answers, most recent on 11/24/2019

  RE: Can't Move Objects freely - they keep snapping to points
  Hi Ray My Panasonic VR is set at 1080/50. I make occasional videos for YouTube of guitar tips, demos, etc. and in common with many others I don't use the video camera's sound track except for when I'm speaking. (Poor quality for music, unwanted room
• SOUND FORGE

  23 answers, most recent on 11/21/2019

  RE: While recording LPs Sound Forge inserts an annoying beep.
  With SF Pro 10, after the registry tweak, running as an administrator is not necessary, so one would not have the additional confirmation step when opening. But.. since it seems to SF is working, live with it, unless you feel adventurous and/or
• SOUND FORGE

  23 answers, most recent on 11/21/2019

  RE: While recording LPs Sound Forge inserts an annoying beep.
  The 'elevated privileges' issue is common in SF Pro 10. Likely the same with AS 10. I need to tweak the registry after almost every Win 10 update. It is a PITA, but after you have done a few times, it gets easy. See the posts in the below
• SOUND FORGE

  4 answers, most recent on 11/18/2019

  RE: Sound Forge 12 Is a Buggy Mess
  I'm glad it works for you as well as it does, seriously. I just wish it did here like it used to with 8. But like I said earlier I use it 6-8 hours every day and I have lots of issues with it from time to time. Just like an hour ago. Suddenly the
• SOUND FORGE

  4 answers, most recent on 11/15/2019

  RE: Mastering with analog gear + two more questions
  I only talk about the windows inside SF. I would prefer to use the space bar to start/stop playback when I'm tweaking plugins and want to listen to the changes. I have to click on the timeline window first to make this work. Please have a look at
• SOUND FORGE

  4 answers, most recent on 11/18/2019

  RE: Sound Forge 12 Is a Buggy Mess
  I'm glad it works for you as well as it does, seriously. I just wish it did here like it used to with 8. But like I said earlier I use it 6-8 hours every day and I have lots of issues with it from time to time. Just like an hour ago. Suddenly the
• SOUND FORGE

  4 answers, most recent on 11/18/2019

  RE: Sound Forge 12 Is a Buggy Mess
  I never had problems with Pro 8, 9 or 10. (or Pro 11 for that matter, however I did not like the the modal plug-in chainer and record UI). No major problems with SF Pro 12 or 13 either. I have SF Pro 10 on the Win 10 laptop and that runs fine too.
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @browj2@browj2 Hi John. Thank you. I may have one more go at the beginning of that one as the intention was to get the word TECH to have a beat movement to the music, A bit like a heartbeat but at the time I did it I was still and still having audio
• Music Maker

  One answer, on 11/5/2019

  Bass tweaking
  I was wondering if there's any way I can alter and tweak and turn down the bath bass. (In music maker) projects just has way too much of it. After I produced the project, I tried to alter it and audacity, but it just made projects on muffled. So
• Music Maker

  No answers, created on 11/4/2019

  [Closed] Bass tweaking
  I was wondering if there's any way I can alter and tweak and turn down the bath bass. (In music maker) projects just has way too much of it. After I produced the project, I tried to alter it and audacity, but it just made projects on muffled. So