• Video Pro X

  27 answers, most recent on 6/9/2022

  RE: VPX14 update replaces VPX13
  So, I manually added paging to every internal drive (except my samples and externals), rather than just going with Auto. (So, the accumulated paging expanded from 9k to like 45k). So far no crashes. Was able to complete the project. We'll see... One
• Movie Studio

  35 answers, most recent on 1/24/2024

  RE: Reorder Audio/video tracks in Moview Studio 2022 Suite?
  @OneHipSista Hi, ...no drag and drop to adjust layers seems... There are no "layers" just tracks. Of course there is drag and drop, but not for tracks. If you mean tracks, not layers, as in " It just seems wasteful to have to drag track content to a
• Movie Studio

  35 answers, most recent on 1/24/2024

  RE: Reorder Audio/video tracks in Moview Studio 2022 Suite?
  Thanks to everyone for the tips/tricks. Your info does help. It just seems wasteful to have to drag track content to a different empty track to put things in a different hierarchy, rather than just re-ordering the tracks directly. That then leaves
• SOUND FORGE

  20 answers, most recent on 5/23/2024

  RE: Issue with Sound Forge Pro 16 and scripting
  Yes, the preset exists and it increases volume by 1 dB. The script works with SF15 build 64 but if I apply later updates it stops doing anything. The script runs, there is no error message but the waveform remains unchanged.
• Movie Studio

  3 answers, most recent on 5/14/2022

  RE: 2022 Platinum: audio production: audio waveform displays miniscule
  @browj thank you. i have confirmed audio and video tracks are separate and selected the track and clicked Ctrl+ H and verified video/audio properties for the application. fyi this is an audio only project. the waveform is very weak.it shows ticks.
• ACID

  267 answers, most recent on 4/2/2026

  RE: Feedback on ACID Bugs
  Please simplify the VST scan process so that it is similar to Acid Pro 7. I have acid pro 7, ableton live 8 and 11, and waveform free on my computer. All of those DAWS scan and recognize VSTS quickly and flawlessly. However, Acid Pro 10 couldn't do
• Movie Studio

  3 answers, most recent on 5/14/2022

  2022 Platinum: audio production: audio waveform displays miniscule
  how the heck can i display a useful audio waveform in order to edit. I need to be able to see the audio form. the mixer shows proper levels but i cannot even come close to discern where i am in the audio track. i have unchecked 1/2 form and checked
• Video Pro X

  One answer, on 5/5/2022

  Cannot open waveform device speakers
  HI Forum, I recently upgraded to a new high end laptop for my video editing. I have been using Video Pro x 13 some time on my current high end machine, with no software issues. I opened a new project on my new machine, dropped a video clip into the
• SOUND FORGE

  2 answers, most recent on 5/5/2022

  Stereo-to-mono for dialog
  I want to convert dialog, originally recorded in stereo, to mono. Sound Forge Pro has three options to do this, single channel (left or right), 50% and 100%. I am thinking the latter takes the left and right channel and smashes them together into a
• Movie Studio

  8 answers, most recent on 4/24/2022

  RE: Error Message
  Hi John,   Thanks for getting back to me. Here are specs on the machine and software. The computer is Dell XPS 8940'11th gen. I-9 -11900 processor (8 core, 16M Cache,2.5 Ghz to 5.2 Ghz)1 Terabyte SSD driveNVIDIA GTX -1660 6GB ram  There is no sound
• Video Pro X

  17 answers, most recent on 4/24/2022

  How do I make the UI smaller?
  Hello everyone!I have been using magix movie edit pro / video deluxe for a very long time now and bought a newer version around a year ago, but never used it because the icons and timeline is too big. everything is too big. Today, I installed video
• Movie Studio

  8 answers, most recent on 4/24/2022

  RE: Error Message
  @Jack-Messmer Hi and welcome to the forum . . . .  I get an error message "cannot open waveform device ' Speaker (Realtek (R) Audio' for playback. There is not enough memory availble for this task...." . . . . Check that the audio device (soundcard)
• Movie Studio

  16 answers, most recent on 4/3/2022

  RE: Flickering
  @david-l651 Hi, Well, the transfer method - "Played on a wall and recorded with a VHS camera in 1990's" - is about the worst way to do this. There is little that can be done about flickering. You can do some adjustments for brightness/contrast and
• Video Pro X

  6 answers, most recent on 3/19/2022

  RE: VPX13 doesn't show audio wave form
  @profilaxagm Hi Gabriel Thanks for the MediaInfo data The audio is standard AAC encoded so that should not be the cause of the waveform issue, however the frame rate mode is variable (VFR) and the range it varies is 'excessive' ie Minimum frame rate
• Video Pro X

  6 answers, most recent on 3/19/2022

  RE: VPX13 doesn't show audio wave form
  @profilaxagm Hi, Update your message to be version 19.0.2.150 and not 10.02.150. I have noticed this intermittently along with many other strange things. Try restarting, try in a new project, try video clips from various sources. Shift+E on a video
• Video Pro X

  6 answers, most recent on 3/19/2022

  RE: VPX13 doesn't show audio wave form
  @profilaxagm Hi Gabriel Can you correct the version number please - I believe it should be 19.0.2.150. Works here for the following: Video - audio codecs: mpg (mp2 and AC3 encoded audio), AAC, AC3 stereo & surround sound, PCM, MPEG Audio
• Video Pro X

  6 answers, most recent on 3/19/2022

  RE: VPX13 doesn't show audio wave form
  @profilaxagm Hi, Update your message to be version 19.0.2.150 and not 10.02.150. I have noticed this intermittently along with many other strange things. Try restarting, try in a new project, try video clips from various sources. Shift+E on a video
• Video Pro X

  6 answers, most recent on 3/19/2022

  VPX13 doesn't show audio wave form
  Hi All, On VPX12 I could display the audio wave form of objects (Shift-E), but it doesn't work in VPX13. I set the option in the Program settings /Video-Audio: Timeline: Half-waveform display Import: Automatically create waveform during import What
• Video Pro X

  61 answers, most recent on 1/31/2023

  RE: Exported video not matching up with finished edit producted
  @johnebaker Hi John. You are using a much longer video than me. I think you are also getting different results. For me, there is no stable link as to when the audio speeds up or slows down or if indeed it speeds up at all during a cycle of playback.
• Music Maker

  27 answers, most recent on 3/16/2022

  RE: Patch 30.0.5.46 for Music Maker Premium
  @johnebaker I am sure that the problem is with this update, because I had already ASIO4All installed and both ASIO drivers works fine with any other software I have installed (Kontakt libraries, Tracktion Waveform, Cubase etc..)...now with this last
• SOUND FORGE

  4 answers, most recent on 5/25/2023

  RE: SF 12.6 issue
  Thanks much for your response ... I'm using Sound Forge Audio Studio. I do see a waveform in the timeline and the file was saved as a .wav file. Anyway, I went to the audio settings and discovered that the driver system had changed somehow ... I
• SOUND FORGE

  8 answers, most recent on 3/12/2022

  RE: Why am I suddenly glitching?
  Maybe it would be helpful if you could upload a sound snippet (dropbox or something)  A screen shot of the waveform my offer a clue as wellHave you tried a different interface? You can also try resetting the SFP and AS.. though I am not sure that
• Video Pro X

  61 answers, most recent on 1/31/2023

  RE: Exported video not matching up with finished edit producted
  @jjgrober Hi Taking some steps back - . . . .  I have been using the speed up effect and it goes a little bit longer than it should be from where I have originally edited it in the video and then towards the end of the video it will somewhat repeat
• SOUND FORGE

  8 answers, most recent on 3/12/2022

  RE: Why am I suddenly glitching?
  Maybe it would be helpful if you could upload a sound snippet (dropbox or something)  A screen shot of the waveform my offer a clue as wellHave you tried a different interface? You can also try resetting the SFP and AS.. though I am not sure that