• Movie Studio

  6 answers, most recent on 2/3/2011

  RE: camera connection
  If you are connecting via USB, then it could be possible in the Edit window, to locate your camera, shown as a drive, then find the video files and drag and drop them onto the timeline. When using the capture feature, i.e. record, this will only
• Movie Studio

  One answer, on 12/6/2010

  Can Magix detect a DV camera through Parallels on Mac.
  Can anyone tell me if a DV camera through connected on the Firewire port on a MacBook through Parallels software can be detected?  I have tried with XP and Windows 7 without any luck.  The message is : Could not connect to selected device
• Movie Studio

  One answer, on 11/21/2010

  RE: Record video over an 'AUDIO' backing track?
  tony,   I not sure if there is a way to directly 'record' video into a MEP14 project but you should certainly be able to record your performance using a video camera and then simply import that into MEP to combine it with your backing
• Movie Studio

  2 answers, most recent on 11/3/2010

  RE: Cannot connect my Panasoic SDR-50.
  Get the latest version of Quicktime for the mov import.  It maybe that your camera produces strange or unclear header information in the mov files. If so you could try running the files through the SUPER freeware. Click on stream copy for audio
• Movie Studio

  2 answers, most recent on 11/3/2010

  RE: Cannot connect my Panasoic SDR-50.
  Your SD-camera records in MPEG-2 format. The Record-function only works with Tape-cameras with Firewire-cable, as far as I know. So you must copy the files to the harddisk, via USB, using Import-function in Magix, or the ordinary Explorer in
• Movie Studio

  2 answers, most recent on 10/4/2010

  RE: Magix pro 16
  Hi thanks for your answer. I did use magix 10 previously on my pc with windows xp and everthing was fine even with the firewirre download. My laptop doesnt have a firewire port and the usb2 will not connect withe the
• Music Maker

  One answer, on 10/1/2010

  RE: How do you fix the latency for recording.
  Hi,   It sounds you have a very high latency. I guess that in your case this latency depends essentialy on your audio card. What kind of hardware have you?   You can try to use an ASIO driver (ASIO 4 all) by exemple to decrease
• Movie Studio

  4 answers, most recent on 9/27/2010

  RE: Movie Edit Pro 16 plus hangs when importing DV video
  I can record in chunks but it takes time. My concern is to get my back log of tapes onto the PC as quickly as possible before the equipment fails or technology changes. I have a newer HD camera that I use for all new recordings.   I don't
• Movie Studio

  4 answers, most recent on 9/27/2010

  RE: Movie Edit Pro 16 plus hangs when importing DV video
  What is your operating system?   What is the camera manufacture and model?   How are you connected USB, FireWire?   I was wondering if maybe there is a file size limitation wall it is hitting, usually this would be 
• Off topic

  One answer, on 9/16/2010

  How to transfer from DV cam to laptop through GRABBY?
  I only have a laptop and it has no firewire port. I bought a GRABBY and connected my cam through the S-video port. I dont find out how to transfer my DV tapes to my computer this way? How do i "tell" the software to import through the
• Music Maker

  3 answers, most recent on 9/7/2010

  RE: How can I record sound from my synthesizer?
  If you are trying to record the *sound from your SY77*, you will NOT be using Vita (MIDI editor) or Revolta (VSTi synth).   You will be doing a direct audio recording!   I'd recommend first having a basic rhythm (drum) track at your chosen
• Video Easy

  5 answers, most recent on 8/21/2010

  RE: When connecting my camcoder Video Easy is not recognising it is connected
  It seem that you are havong the same problem as me.  I use firewire nothing seems to work.  Windows 7 shows the camera in 'Devices and Printers' correctly but Edit pro 16 does not see it.    I have downloaded a trial version of Adobe Progam and
• Movie Studio

  2 answers, most recent on 8/20/2010

  RE: I am unable to connect my Sony DCR TRV33 to Edit Pro 16 Plus using Windows 7
  I have a Sony HDR-XR500 and I use Movie Edit Pro 16 Plus in both a Windows Vista 64, and the Window 7 64 OS.   For me to use the Sony device, I do not use the first screen Record mode of Movie Edit Pro, I go right to Edit, then to the
• Movie Studio

  2 answers, most recent on 8/20/2010

  I am unable to connect my Sony DCR TRV33 to Edit Pro 16 Plus using Windows 7
  The above video camera is seen and recognised as a device in devices & printers correctly.  When I load Edit Pro 16 plus and try to connect to the camcorder using firewire (ilink) I get the response that it cannot find the camera.   using the
• Movie Studio

  One answer, on 8/13/2010

  RE: Firewire adaptor
  Excluding what Apple might do, I know of two connectors used for firewire, the miniature four pin connector and the full size six pin connector.  My experience, cameras, etc, seem to use the miniature 4 pin connector where desktop computers use
• Movie Studio

  3 answers, most recent on 8/14/2010

  Installing EditPro 14 plus on a new system - problems
  Trying to install editpro 14 on a new laptop, after the installation, says all the drivers didn't install, wants the cd left in and to reboot.  Bring up the program again, keeps asking for the same thing.  Never even gets to where it asks for the
• Video Easy

  5 answers, most recent on 8/21/2010

  RE: When connecting my camcoder Video Easy is not recognising it is connected
  Many thanks When I connect using USB it is recognised as Digital Camcorder and allows me to download the video, however the audio is 5/10 seconds behind the visual, when I connect using Firewire nothing happens.   Mike
• Video Easy

  5 answers, most recent on 8/21/2010

  RE: When connecting my camcoder Video Easy is not recognising it is connected
  Did the camera come with a disc for maybe installing a driver? I wouldn't think Firewire needs that, but... maybe?   Why is the brand of camera?
• Video Easy

  5 answers, most recent on 8/21/2010

  When connecting my camcoder Video Easy is not recognising it is connected
  As instructed I am connecting my camcorder to my PC using Firewire, however it is not being recognised.
• Movie Studio

  5 answers, most recent on 9/10/2010

  RE: Magix 15 will not recognise my new Sony HDR- CX115E.
  Hi brianparish, when you connect using the recording screen option then this would only work using firewire. Your camera has USB output? If so attach your camera via USB, then in the explorer in the Edit window of the program, it should
• Movie Studio

  One answer, on 7/13/2010

  RE: the program will not let me load a movie from my Canon FA100
  you may have to install a firewire card into the back of you computer
• Movie Studio

  2 answers, most recent on 7/13/2010

  RE: I like to use the MagixPro 15 plus but it won't see my JVC DV camera.
  you may have to have a firewire card installed instead of a firewire port
• Movie Studio

  2 answers, most recent on 7/13/2010

  I like to use the MagixPro 15 plus but it won't see my JVC DV camera.
  I have the Magix Pro 15 Plus.I can't Capture because it doesn'tfind my camera,a JVC DV with harddrive.I am using the firewire connection. It tells me that it doesn't see the camera.It looks like nice software but only when i can use it. Help Hank
• Music Maker

  One answer, on 6/26/2010

  RE: can I sing..using my own voice?
  if you on a budget .. just get a usb microphone that you can get at walmart or go wit a podcast type equipment like http://www.pssl.com/!p3VMeC9w!WVmUCOsWViI6g!/Behringer-Podcast-Studio-Firewire-Podcasting-Kit-s  this will make ur budget studio