• Movie Studio

  18 answers, most recent on 11/29/2021

  RE: MP4 playback in VLC problem
  @rob-osborne @johnebaker @emmrecs @Former user @AAProds Hi. Once downloaded on my system VLC player always played it with zoom. In Windows Film and TV it always opens as a 360° video as default. The only difference I can see between my exports
• Movie Studio

  18 answers, most recent on 11/29/2021

  RE: MP4 playback in VLC problem
  @rob-osborne Hi I can replicate the 'zoom' in appearance playing in VLC - both with your video and some 4K UHD of my own and the issue would appear to be VLC/GPU related. If I play the clips with VLC on a monitor connected to my Intel UHD 630 the
• Movie Studio

  18 answers, most recent on 11/29/2021

  RE: MP4 playback in VLC problem
  @rob-osborne Rob, how are you zooming in and out with VLC Player, because I can't get my zoom to work at all. Also, it would be good if you could do a short export and put it on Google Drive or Dropbox to see if we can replicate VLC's
• Video Pro X

  35 answers, most recent on 11/27/2021

  RE: Interpolate intermediate frames
  @Derek-McArthur @Scenestealer @johnebaker Hi Derek. Have finished my own comparison on my machine. If you can, try doing the same on your machine please. You too please Peter. I selected a frame from one of my 4K video clips in MEP 2022 and exported
• Video Pro X

  35 answers, most recent on 11/27/2021

  RE: Interpolate intermediate frames
  @Derek-McArthur Hi I too did a similar comparison but side by side, zoomed in, in an image editor and there is marginal difference in the bottom left corner and a slight twist in the fence post edges, however to see this the images needed to be
• Movie Studio

  24 answers, most recent on 11/23/2021

  RE: Where has ZOOM option gone in 2022 premium?
  @Peeteey, @browj2, @CubeAce @me_again, @emmrecs, @nigelhaverly @Tusk Hi Everyone The 'slider' zoom function is still available in the Size, Position,Rotation dialog in MEP 2022 and VPX 13, however the method is not obvious - click and drag with the
• Movie Studio

  24 answers, most recent on 11/23/2021

  RE: Where has ZOOM option gone in 2022 premium?
  Looks like I inadvertently found a quicker way to zoom other than punching in the dimensions in the size/position/rotation panel. I usually have my video fill the monitor, turns out, if you pull back and leave space on the left and right, or top and
• Movie Studio

  24 answers, most recent on 11/23/2021

  RE: Where has ZOOM option gone in 2022 premium?
  @CubeAce Hi, the most useful thing I use the Zoom Slider for is to adjust effects, and none of the sizing options show up when I select the effect only, w/o the video. Like for instance I like to use vignettes. In the old version, I used to ungroup
• SOUND FORGE

  One answer, on 11/22/2021

  RE: My sound forge working with only one audio input
  I am not familiar with the Octa-Capture interface. If you are wish to record Zoom or other online meetings audio and video, you can do that directly though the meeting's 'recording' option, desktop or through the browser (with the meeting host's
• Video Pro X

  12 answers, most recent on 11/14/2021

  RE: Setting multiple objects to same size window
  @BSMan Hi . . . . If I set up three clips from the original clip . . . . Is this what you are trying to achieve? Has original clip just been cut into 3 sections without removing parts of it? If so this is not necessary - we have already covered
• Movie Studio

  7 answers, most recent on 11/15/2021

  RE: Program recognizes areas with no video content really no such areas
  @SomeMan Hi I assume you mean you are getting this message:- . . . . The program produces a video that is shorter than it should be or a full video, but most of it does not have an image, only a black background. . . . . The most likely cause is a
• Movie Studio

  One answer, on 11/10/2021

  The zoom horizontal + / - pops up a menu instead
  Replaced my my previous version of Movie Editor Pro with the latest 2020 edition, but in this one the + /- button at the bottom right corner, instead of stretching or contracting the video, it pops up a menu. It is very frustrating. Is there an
• Video Pro X

  One answer, on 11/8/2021

  [Closed] Zoom in to section, stay at section, then zoom out to full screen
  In Video ProX13 I would like to take a clip and start by zooming in to a section, then maintain that section for a period of time, then at the end zoom back out to full screen. The problem is that while I can break it up into 3 clips so I can zoom
• Movie Studio

  24 answers, most recent on 11/23/2021

  RE: Where has ZOOM option gone in 2022 premium?
  @Peeteey Hi. Reduce the monitor view size using the hamburger menu bar in the top left of the monitor preview and reduce the view to 705 or 50%. Grab a handle on the video object that has the size position applied and pull it outwards.
• Video Pro X

  28 answers, most recent on 11/15/2021

  RE: Need help to use keyframes for effects in sections of a video object
  John, When I go through the steps it doesn't work. Here's what happens in VPX13: 1. Go to 3 seconds, select size/position/rotation. A box comes up that says "apply effect". I set a keyframe, then click on "apply effect" box. The set etc keyframe
• Video Pro X

  28 answers, most recent on 11/15/2021

  RE: Need help to use keyframes for effects in sections of a video object
  OK, that gets me as far as starting with full screen, then zooming to a section and the section continuing after that. But when I then try copying keyframes or setting new ones, as soon as I select zoom to right the earlier defined effects are gone
• Video Pro X

  28 answers, most recent on 11/15/2021

  RE: Need help to use keyframes for effects in sections of a video object
  I was able to set up the camera/zoom effect to start where I wanted and end with a section as I wanted. Copied the end keyframe to later in the video to where I wanted the pan zoom to start. As soon as I select the pan/zoom the entire video is
• Video Pro X

  28 answers, most recent on 11/15/2021

  RE: Need help to use keyframes for effects in sections of a video object
  @BSMan Hi The order in which the effect is keyframed is not as you describe For your example: Apply the effect Camera/Zoom effect to the video/image object  Define the size of the section and location - this can be done in the Preview monitor or by
• Video Pro X

  28 answers, most recent on 11/15/2021

  RE: Need help to use keyframes for effects in sections of a video object
  JohneBaker, Thanks for the links to the tutorials. They were a help, especially the last one. However, I'm finding that the keyframes certainly don't work in VPX13 they way I would expect. I also googled and found a tutorial video specifically for
• Video Pro X

  28 answers, most recent on 11/15/2021

  Need help to use keyframes for effects in sections of a video object
  BSMan wrote on 10/13/2021, 1:29 PM I could use some help with using keys to set up effects within a video. For example, should I be able to set up two keys within a video and then apply an effect to those keys? If so, how do I do that? At this point
• Video Pro X

  3 answers, most recent on 10/13/2021

  RE: Update version VideoProX will not display audio waveform
  @BSMan Hi The following work for me: AC-3 Stereo and Dolby Surround Sound AAC Stereo PCM Stereo Additionally - for recordings where the audio level is low you cannot see the waveform without zooming in vertically on the timeline. Can you post a
• Movie Studio

  16 answers, most recent on 10/13/2021

  RE: [Closed] Upgrade / Update?
  I can tell you not all templates load correctly... I must admit that this is starting to get frustrating. Less than half of the transition templates work for me. I still lose video playback if I open the audio cleaning window. The zoom in and out
• Movie Studio

  4 answers, most recent on 10/12/2021

  Overlaying still images on a video
  Hello, I have a very basic query but can't find the answer in the manual. I have a Zoom recording, and to liven it up I want to add images that illustrate the talks. However I'm finding that I can't get the image to fill the screen - there are
• Movie Studio

  7 answers, most recent on 10/3/2021

  RE: What happened to movment option when you right click object in 2022 ve
  @barry-summer @CubeAce @johnebaker Hi Barry, This is what you are referring to, I believe, in MEP2021: Selecting Pan L to R gives this: Two keyframes are put on the timeline for the pan. There is a zoom in to 125 to start to keep the image