• Video Pro X

  30 answers, most recent on 4/20/2022

  RE: Is there a file, wich contains all the program's settings?
  @profilaxagm, @CubeAce Hi . . . . There is no PAL 30fps standard. Pal is either 25fps or 50fps it refers to the refresh rates of the two interleaved parts of each frame if using an analog camera . . . . This is not limited to analog recorders only,
• Movie Studio

  179 answers, most recent on 4/16/2022

  RE: Video Pro X12
  @Reyfox Hi. While I understand the arguments against combining the forums I think the arguments are pretty weak personally. The video section has no resemblance to the audio section or the web building section but they are all here. Surely adding a
• Movie Studio

  5 answers, most recent on 9/27/2022

  Program Stops Responding After Slightest Action
  My program keeps freezing up to the point of being unusable. I am currently using Magix Movie Studio 2023 Suite, having updated it today. (I was using Magix Edit Pro Premium 2022 before, having the same issues.)If I drag in a clip, it will freeze.
• Photostory

  No answers, created on 12/24/2021

  Installing new purchase on new computer
  Just purchased Photostory 2022 on-line and received email for installation. I clicked on installation link and the program started to load and then quit half way through...goes into pause mode. When I click "continue" it doesn't continue but just
• Movie Studio

  14 answers, most recent on 2/10/2022

  RE: Unable to capture videos, images with Record videos, images
  @joserobles1941 Ok, screen capture i believe you need to click recording levels & choose Stereo Mix, or at the top choose no sound I haven't used Magix to record the screen on this PC & despite lots of Google searching i can't get Stereo Mix
• Video Pro X

  34 answers, most recent on 9/25/2022

  RE: Title templates - dynamic titles disappeared after export
  @browj2 @Former user Hi John. That is not the issue. The issue is not being able to use the nvidia card for all hardware acceleration settings for export when it plays with those settings and objects within the program and not even having to revert
• Movie Studio

  9 answers, most recent on 12/12/2021

  RE: Understanding original file management
  @Joe-Engel Hi If you are worried about the amount of space the cache takes up - it is approx 30MB in size and you cannot alter its location. The NAS box connection speeds compared to USB 3 and SATA are theoretically 1Gb/s, 4.6 Gb/s and 6Gb/s
• Video Pro X

  38 answers, most recent on 2/7/2022

  RE: proDAD Mercalli V5 SAL
  @Pawel-Rybinski, @CubeAce, @AAProds Hi everyone I cannot replicate the 'jello' issue using CPU, UHD 630 or RTX 2060 - with VPX 13 - I do not get any tearing, de-interlacing artefacts and also less zooming then Ray is experiencing. These are the
• SOUND FORGE

  One answer, on 1/4/2022

  Crash after dropping markers
  Dear Support, I'm using Sound Forge Pro 15.0 Suite , build 161 64 bit over an AMD Windows 10 machine, Windows 10 21H2 Hungarian. My problem is: when I'm dropping a marker in the sound file, the program is crashing in a half minute. The program quits
• Other products

  One answer, on 12/20/2021

  [Closed] Error 0x8004e02c (message missing) when using DVD Architect
  Unable to find a solution to the subject problem when running the "Prepare/Burn" phase of creating a Blu-Ray DVD using DVD Architect 7.0. I have had numerous "crashes" about a half hour or so into the prepare/burn process. My PC specs
• Video Pro X

  10 answers, most recent on 8/21/2022

  ADVICE PLEASE
  Processor    Intel(R) Core(TM) i7-8750H CPU @ 2.20GHz   2.21 GHzInstalled RAM    16.0 GB (15.7 GB usable)System type    64-bit operating system, x64-based processorLAPTOP HARD DRIVE - 448GB FREE, 503 GB USEDEXTERNAL HARD DRIVE - 2.15tb FREE, 1.47TB
• Movie Studio

  27 answers, most recent on 1/29/2022

  RE: Aspect Ratio and Movie name problems
  The 3D video problem is that MEP doesn't issue an error message for an unsupported output. Starting with a full 4k 16:9 input and trying to get a full width side by side stereoscopic output would be 2k height, but 8k width which is unsupported. MEP
• Rescue Your Videotapes!

  33 answers, most recent on 7/28/2022

  RE: VHS capture quality is very poor
  @AAProds Hi Al. In the UK isopropyl alcohol is never sold as 100% proof as unless the container is glass, (as used to be sold to the film industry) some container material can leach into the fluid over time. When I had to work with isopropyl alcohol
• Video Pro X

  5 answers, most recent on 11/30/2021

  RE: Video 2022 Deluxe freezes constantly - Video 2019 Deluxe doesn't
  @Adelphos Hi . . . . how can I turn off the constantly annoying update warning . . . . Did you disable the Update Notifier as shown in the bottom half of the support article you linked to? You can also uninstall Update Notifier also known as Magix
• Movie Studio

  19 answers, most recent on 1/25/2022

  RE: Looking for effect
  @Mark-Soderquist @me_again @sasiuk Hi Gid. Is the variation in length from the recorded effect sped up or slowed down by the variation difference between the effect and the 'clip'? Ray. @CubeAce I would say no, although the pic is half the length
• Music Maker

  8 answers, most recent on 12/9/2022

  RE: DISTORTED SOUND
  @Paul-Channon Hi Try increasing the audio buffer sizes in the program settings, 'one notch' on the up spinner should be enough. If that fails what is the audio card/chipset in the computer? . . . . If getting a decent sound card will get me past
• Xara Designer Pro

  One answer, on 1/17/2022

  Xara Designer Pro has stopped working
  For reasons I don't understand my xara Designer pro v.18 has stopped working. When I open the program it starts with the opening window but then it starts to loop and nothing happens. I have tried uninstalling and then reinstalling from my account
• Movie Studio

  34 answers, most recent on 3/27/2022

  RE: Movie Studio 2022-error during export and crash log not being sent
  @Gary-Oddi Thanks for the screenshots. Please also follow the link that @CubeAce gave and put the full spec of your computer in your signature; it really does help! On an initial, very quick, read of the MediaInfo data and your export settings I
• SOUND FORGE

  8 answers, most recent on 12/13/2021

  RE: Recording streaming audio from a radio station
  After the final MP3s are encoded the master PCM files can be deleted. btw, if there is no stereo content (as in most spoken word material) A single channel (mono) PCM file would be half the size of a two channel PCM.If the same file is encoded as
• Movie Studio

  39 answers, most recent on 8/12/2023

  RE: Movie Studio - Audio and Music Editor 3
  @CubeAce Hi Ray, I just checked my comfort distance from the mic and it's about 4-5 inches. It's best to test different distances. Most of my plosives are actually just speaking louder, too loud, emphasizing something, so I don't use a dead cat. A
• Movie Studio

  8 answers, most recent on 3/4/2022

  RE: Where is old video stabilization?
  In reply to Kemeshang, MEP can handle a plethora of frame rates. For example I can edit digitized 8mm movies which are shot at 16fps. Often MEP will show 23.98 as the frame rate when it is really 23.976 which is supposed to be exactly 240000/1001.
• Movie Studio

  21 answers, most recent on 2/10/2022

  RE: Why does my timeline mode look weird?!? Need help ASAP please!
  Alright so, the old problem has now been "resolved" (Not really) but I managed to finish up my project with a somewhat expected outcome.   And that was when i encountered a brand new problem.   I can't even export my movie as an MPEG-4. I can't save
• SOUND FORGE

  8 answers, most recent on 12/12/2021

  RE: CoreFX vs EssentialFX vs Third Party.
  I do not have the Wizard suite, but based on other one-size-fits-all plug-ins (like Waves audio one-knob suite), I do not expect to be blown awayI was always impressed by the sound of the half-rack space dbx 163 "over easy" compressor though, which
• ACID

  13 answers, most recent on 1/1/2022

  RE: Where is the Tempo (BPM) stored in an MP3 file?
  ADSR appears to only work for samples. It only provided BPMs for loops. If I forced it to analyze a track, it returned too many incorrect bpm's, halfed, doubled or otherwise. Plus this would be tedious as there was no way to force it to change all