• Movie Studio

  24 answers, most recent on 2/3/2025

  RE: Edited video length
  @Jennifer-Wilson Hi I am of the same opinion as @browj2 regarding splitting up the video into shorter 'chunks' and the 'story telling'. . . . . how to put them all on one thumb drive or a DVD . . . . I would never recommend using thumb drives for
• Movie Studio

  61 answers, most recent on 7/25/2024

  RE: My MAGIX software will not cut a DVD to Disc
  Quoting from my post of June 21: Two things about trying that: (1) The ISO for True Grit is too large to get on a standard DVD-R and no-one sells DVD-R DL discs. (2) Trying to cut a much smaller file to DVD-R I got spat out
• Movie Studio

  46 answers, most recent on 4/10/2025

  RE: Stereo not supported - burning disc
  @BrenyC, @CubeAce Hi Brendan, Ray Ray:- . . . . I'm wondering if this is another problem that has been caused by a high differentiation of frame rates (28 frames per second difference) . . . That is one component that can be fixed by converting all
• Movie Studio

  61 answers, most recent on 7/25/2024

  RE: My MAGIX software will not cut a DVD to Disc
  Thanks @johnebaker Two things about trying that: (1) The ISO for True Grit is too large to get on a standard DVD-R and no-one sells DVD-R DL discs. (2) Trying to cut a much smaller file to DVD-R I got spat out
• SOUND FORGE

  4 answers, most recent on 12/13/2024

  RE: Soundforge 17 upgrade with DVD capture
  After installing Sound Forge, you could also, copy the (unpacked) installation files in 'Documents> MAGIX Downloads> Installation manager'. These files could be copied to an external card or drive, cloud drive or.. a DVD-R. Also make note of
• Movie Studio

  61 answers, most recent on 7/25/2024

  RE: My MAGIX software will not cut a DVD to Disc
  Yes, MEPP 19.0.1.31   As to the make and type of disc - "Verbatim DVD+R 4.7GB 16x White Inkjet Spindle 50 Pack"   I'll try that ISO trick in the morning.
• Photostory

  No answers, created on 7/2/2025

  Impossibilité de visionner les anciens diaporamas pour PC.
  En cliquant sur " start.hta " apparait le message suivant " This disc requires the use of an AciveX control which has failed to install properly. Select OK to try to allow to attempt to diagnose the problem, or Cancel to exit. " En cliquant sur OK,
• Video Pro X

  31 answers, most recent on 8/28/2024

  RE: Selecting Movie Settings with VP X16
  @rickduley Hi Rick The range error message and log indicate that the first 1.5 secs of the timeline is empty, this is not a problem in itself, however there are other potential issues: WRT to the Bunnings time, I have managed to replicate this,
• Samplitude

  40 answers, most recent on 4/15/2025

  RE: Real Time Varispeed Sound Quality in Samp & WhichSound Forge Version?
  @gregory-battaglia Hi . . . . Aren’t SSDs “write once” storage devices, like USB flash drives? . . . . No, for an SSD which has Windows installed on them Windows constantly reads and writes various support files needed for it to function and support
• Movie Studio

  61 answers, most recent on 7/25/2024

  RE: My MAGIX software will not cut a DVD to Disc
  @rickduley Hi Rick . . . . Sorry to be a drag John E but this is all above my pay scale. . . . Not a problem. . . . . older programs would have been compatible with the older nvidia driver for the GT 730 . . . . Certainly, VPX 16 is not capable of
• Photostory

  15 answers, most recent on 1/28/2026

  RE: 2026 Manual doesn't agree with program - Split Photostory, etc.
  @doane HI You can ignore that 'error' message it means there is no set GPU which can hardware accelerate the encoding of the video. The CPU will do all the processing and encoding, however it will take considerably longer to complete. However if the
• Photostory

  2 answers, most recent on 8/3/2023

  RE: DVD player cannot read Disc
  @Scott-Finz Hi . . . . I created a slideshow and burned it successfully. I burned it to a DVD-R disk . . . Did you use the Photostory disc creation feature, if so which option did you select DVD, Blu-Ray or AVCHD? What make are DVD-R disks? Are the
• Video Pro X

  14 answers, most recent on 1/6/2025

  RE: Bluray Burner Problems and Multi-Language Bug in VPX16
  @johnebaker @AAProds @CubeAce Hi, I think I'll go with this one. The price is about the max. that I want to pay and they are available at my local Staples (Bureau en gros) only 138 km away, or 30+ km if I swim across the St-Lawrence River. Verbatim
• Movie Studio

  61 answers, most recent on 7/25/2024

  RE: My MAGIX software will not cut a DVD to Disc
  I went out and bought some DVD-R discs but, it is sad to report, I got the same result. I have sent the Log File to OneDrive https://1drv.ms/t/c/bb228147f3dd175d/EQepHGnlJUxJpUh0kqybZRIBY032ytMII32JOosRBUVaow?e=N4TqWb I also tried the Burning ISO
• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  @ericlnz Hi Thanks for the info, so far they do not appear to have reduced the quality of the Verbatim discs. The Verbatim majority of Verbatim discs I use now are DVD-RW and BD_RE for test burning, usually with DVDA , and final testing before I
• Movie Studio

  8 answers, most recent on 9/6/2023

  Magix 2024: dvd plays on PC but not on dvd players!
  I have created many test files with Magix 2024. The DVDs I create play fine on my PC and other PCs but will NOT play on DVD players hooked up to TVs. I have tried many different things. I have burned the DVDs with Magix. I have created the files
• Movie Studio

  61 answers, most recent on 7/25/2024

  RE: My MAGIX software will not cut a DVD to Disc
  (1) x16 Version 20.0.2.219 (UPD3) (2) Does load MTS but blank/black (that I assumed meant it wasn't loading). (3) The Import etc. options are set to NVIDIA GeForce GT 730. The alternatives are CPU, Intel(R) UHD Graphics 630, Microsoft WARP Device. I
• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  @mark-perry Hi Thanks for the disc info - the discs you have the media ID code I was expecting to see. From experience I have had serious reliability issues with them, so bad I switched Verbatim and Ritek DVD-R printable face discs, both single and
• Movie Studio

  61 answers, most recent on 7/25/2024

  RE: My MAGIX software will not cut a DVD to Disc
  @rickduley Hi In reverse order: . . . . X16 will not read MTS files . . . . If MEP and Video Easy reads them, then so can VPX 16. Do you get any error message when you try to import the mts file. If the video comes in blank/black then try changing
• Photostory

  2 answers, most recent on 8/3/2023

  RE: DVD player cannot read Disc
  I selected "DVD" for the Photostory disc creation feature. I tried burning it 3 times.....once on a blank Memorex DVD - R and twice on blank Sony DVD +RW discs. I tried playing them in two different DVD only players. I have used these types of disc
• Photostory

  2 answers, most recent on 8/3/2023

  DVD player cannot read Disc
  I created a slideshow and burned it successfully. I burned it to a DVD-R disk but both of my DVD players (and my computer) cannot load the disk. I tried it four times using 4 different types of disks. All were scratch free and blank. I have used
• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  @mark-perry Mark, my DL DVD burn went through overnight with no issues. I did it all in MMS 2024, using my Pioneer DVD/Bluray burner at 2.4x. It seems to play OK (I didn't watch all of it, just played various sections) on my Bluray player and in VLC
• Video Pro X

  46 answers, most recent on 1/16/2024

  RE: VPX15, no hardware encoding during BD burning
  @Willem-vdfdeJong Hi . . . . pre-prepared files and you use software like Nero Burning Rom to simply and directly burn them to a BD, then is the BD going to work normally in BD players etc . . . . I do not have access to a BD Player at the moment so
• Movie Studio

  5 answers, most recent on 6/7/2023

  RE: Problem with burning to DVD
  @Daryl-Reading Hi Daryl . . . . I have read about VidelDeluxe.exp that has referred to it as a "Virus" and some discussion of deleting is or not . . . . Always refer to the program manufacturers official support and forums, and/or their official