• Movie Studio

  61 answers, most recent on 7/25/2024

  RE: My MAGIX software will not cut a DVD to Disc
  @rickduley Hi. Probably not overly common as I have been using optical drives since Win 98 and in the early days quite heavily. Also some burners had additional abilities such as label writing direct to disc or able to burn patterns or text
• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  @mark-perry Hi Thanks for the disc info - the discs you have the media ID code I was expecting to see. From experience I have had serious reliability issues with them, so bad I switched Verbatim and Ritek DVD-R printable face discs, both single and
• Movie Studio

  61 answers, most recent on 7/25/2024

  RE: My MAGIX software will not cut a DVD to Disc
  Quoting from my post of June 21: Two things about trying that: (1) The ISO for True Grit is too large to get on a standard DVD-R and no-one sells DVD-R DL discs. (2) Trying to cut a much smaller file to DVD-R I got spat out
• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  This afternoon I tried the MEP (MEP 2021) to disc method: Internal - mpm disc, then LiteOn external Blu writer - verbatim. Both times discs detected and ok with adjust to fut disc procedure all good. But both times the same results MEP failed
• Movie Studio

  70 answers, most recent on 9/19/2025

  RE: Reasonably affordable graphics card for Magix Movie Edit Pro Plus
  @Tusk Hi. The USB ports on the motherboard should have colours on the inside of them. You want your USB drive in the fastest one. If you have a USB-C port use that. If not a USB-3 port would be your next best bet. You may not have the latest USB
• Photostory

  53 answers, most recent on 4/2/2024

  RE: Photostory Deluxe Won't Burn DVD: mda reports DVD creation error: 8400
  @ann-hesselsweet Hi Assuming the burn completed. In Windows File Explorer, browse to the folder: C:\Users\Username\AppData\Roaming\MAGIX\Fotostory_2023_Deluxe\ Open the photostory.log file in Notepad and scroll to the bottom and locate the lines
• Video Pro X

  31 answers, most recent on 8/28/2024

  Selecting Movie Settings with VP X16
  I have VP X16 (22.0.1.219).My PC isDell Inc. OptiPlex 3070Bios Version 1.25.0Date 12/13/2023Motherboard Manufacturer Dell Inc.Model 07WP95Version A01Operating SystemEdition Microsoft Windows 11 Pro (64-bit)Version (Build) 23H2 (10.0.22635)DVD Burner
• Movie Studio

  8 answers, most recent on 9/6/2023

  Magix 2024: dvd plays on PC but not on dvd players!
  I have created many test files with Magix 2024. The DVDs I create play fine on my PC and other PCs but will NOT play on DVD players hooked up to TVs. I have tried many different things. I have burned the DVDs with Magix. I have created the files
• Movie Studio

  8 answers, most recent on 9/6/2023

  RE: Magix 2024: dvd plays on PC but not on dvd players!
  @Don-Fredrick Hi As @CubeAce has commented, I suspect this is a hardware issue with the the 2 burners, not the program. The 2 burners which, if they are the same age as the rest of the PC, may be struggling to burn the disc correctly as they may not
• Movie Edit Now

  16 answers, most recent on 10/22/2024

  Cannot Open Video Files Recorded With OBS In MAGIX Movie Edit Pro 14
  Hello, I have been having an annoying problem with MAGIX Movie Edit Pro 14 software after reinstalling it onto my laptop after years of not using it or having it on any of my computers. The issue is that when I record with OBS screen recorder and
• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  @mark-perry @ericlnz @johnebaker I can only fully concur with what John wrote. My personal choice for both single and dual-Layer blank discs for several years has been those manufactured by Ritek. I honestly cannot remember the last time I
• Music Maker

  2 answers, most recent on 3/15/2026

  RE: I installed Music Maker 2014 in new computer.
  @TERRY-BEACH Hi Error code -10  means the program online connection had an error, or was dropped/interupted. Assuming the new computer is running Windows 11. If the serial number begins with P2- then this may be the issue, the P2- serial numbers
• Video Pro X

  14 answers, most recent on 1/6/2025

  RE: Bluray Burner Problems and Multi-Language Bug in VPX16
  @johnebaker Hi John EB, The ASUS burner has its own power supply, connected to the mains. For USB, I have tried through a hub, directly connected to ports on two computers, always with the same result. There is a firmware update available for the
• SOUND FORGE

  4 answers, most recent on 3/2/2023

  RE: How to Render cd's with Metadata with wav files
  @Arthur-Gabhart The should be an option Write CD-Text on the Burn Disc-at-Once Audio CD dialog. This writes the Disc Title, Disc Artist, Track Title and Track Artist to the CD.
• Movie Studio

  61 answers, most recent on 7/25/2024

  RE: My MAGIX software will not cut a DVD to Disc
  @rickduley Hi. Hey there @CubeAce, they do burn data to DVDs. How do you think those videos used to get there? 🙃 I'm not the best person to know the answer to that on this forum hence I copied @AAProds into the conversation as he uses DVDs on a
• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  @mark-perry Hi . . . .  using the external DVD burner . . . . noted the speed changes presumably when each file or sector was written . . . Which one, according to a previous post you have 2: LiteOn eUA108 - I can find no info on this model, is it
• Video Pro X

  5 answers, most recent on 6/12/2023

  RE: Burning a DVD
  @rdealmeida12 Hi Bob Thanks for the burn log info. Assuming the folder C:\Users\Bob\Documents\MAGIX\Video_Pro_X4\Disc Images\DVD Image 2023-06-10 containing the VOB, IFO and BUP files, is there then the cause of the failure is either: You Antivirus
• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  3h 54m. * i have done a 4h 03m a few years ago and that was fine. today i tried dvd folder withI MGBurn (write tab, internal dvd) burned fine it but didn't finish the disk as it now has 0 free o used so another one but i'm still getting the hang of
• Movie Studio

  4 answers, most recent on 12/2/2023

  RE: Chapter Makers Not Recognized in 2022 Movie Studio Platinum
  @Michael-Hurn Welcome to the Magix user to user forums. First, are you sure you are creating Chapter markers and not simply Markers? The latter serve a different purpose to the former. (My sincere apologies if you already knew this but we,
• Movie Studio

  4 answers, most recent on 1/1/2024

  RE: Exporting
  @Betovalle HI . . . . shouldn't there be a log file to facilitate the detection of possible problems like this . . . . There is, with MEP 2013 the burn log file dbk.log should be located in the folder C:\Users\UserName\AppData\Roaming\MAGIX\Program
• Movie Studio

  44 answers, most recent on 1/17/2025

  RE: Making Blu-rays
  I don't remember which template I used for the first project (the one I actually wanted to do). But I made plenty of modifications for that. With the three other projects (that were only experiments) I used the default template, and didn't do any
• Movie Studio

  8 answers, most recent on 9/6/2023

  RE: Magix 2024: dvd plays on PC but not on dvd players!
  I was able to get it to work, as you suggested, by creating the ISO file and then burning that to a disc in a separate step. My version of Nero is older and does not have a burn ISO option but I was still able to create the DVD, which then played on
• SOUND FORGE

  4 answers, most recent on 3/2/2023

  RE: How to Render cd's with Metadata with wav files
  The should be an option Write CD-Text on the Burn Disc-at-Once Audio CD dialog. I have Sound Forge Audio Studio 16. This is not an option Does anyone know if this is a bug, or a feature?
• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  @mark-perry Just recapping slightly: I believe you can create an .iso (image) file of the project. Is that correct? But when you come to burn that .iso to disc, using a variety of burning software including ImgBurn, the write fails, always. Is that