• Movie Studio

  11 answers, most recent on 3/18/2024

  RE: Effects freezes program
  @Bob-Nicholson Hi, It works fine here. What effects and what is the nature of the material on the timeline - any variable frame rate clips? John CB
• Rescue Your Videotapes!

  10 answers, most recent on 2/7/2023

  RE: [Solved] Program crashes when 100% saved - result video not playable
  @Juha-Nevalainen Hi. I would try the UHD Graphics in the drop-down menu as your file has no encoding data in it (resolution, colour space or frame rate). The graphics processing is not a combination I have seen before but it looks like the Intel GPU
• Video Pro X

  27 answers, most recent on 11/18/2024

  RE: VPX Feedback Button - Features In Consideration/Planning - Comments
  I generated this one with VPX16, but without knowing that it could work with slow motion below the constant 0.25, I ended up using some ffmpeg resource. But logically, if you re-record a slow video, you can remove the "frozen" frames between one
• Movie Studio

  13 answers, most recent on 9/8/2025

  RE: Nvidia RTX 5080 Graphics Card | But MEP 2026 suddenly stopped using it
  Hallo @Apollo89x  In Ihren Einstellungen ist Level mit 4.1 eingestellt.Für Full HD mit mehr als 30 FPS benötigen sie Level 4.2 Bei UHD (4K) benötigen sie für über 30 FPS Level 5.1 oder sie benutzen AUTO als Einstellung. Hallo und vielen Dank. Ich
• Movie Studio

  27 answers, most recent on 8/1/2024

  RE: No Longer Able to Render Project
  Hi Gid, All my project files are on the C-drive. I have attempted a few times to export the movie onto the C-drive but it doesn't seem make a difference if it's exported onto the C-drive or my internal hard drive. I have 16GB of RAM. I have a
• Video Pro X

  15 answers, most recent on 11/13/2024

  RE: VPX/MMS frame rate variable
  @Betovalle Hi The Speed factor and Frames rate settings are linked, you can only use one or the other. Speed factor values less than 0.25 and greater than 4.0 are not possible when the clip has audio attached. The warning message to detach/remove
• Movie Studio

  25 answers, most recent on 8/7/2025

  RE: Any decent support for Insta360 videos yet?
  @Reyfox I guess you are referring to 360 edited final video? The software can export to various other formats. Yes that is correct. I am referring to the immersive 360 video file that can be created. This type of file is limited to H264. Just taking
• Movie Studio

  23 answers, most recent on 10/9/2024

  RE: HDR not supported in Movie studio 2025?
  @Serge-2024 Hi Pleased to hear you have a solution - 'Auto belichting' - 'Auto lumination' is close, in the English version of MMS the button is labelled 'Auto Exposure'. . . . . downloaded a few *.cube files . . . . Cube files come in 2 different
• Movie Studio

  7 answers, most recent on 1/28/2024

  RE: magix showen white screen 360, why ?
  Hi. I can confirm I have the same results you are seeing. The file though is not from a 360° camera but from some sort of app. The file's attributes are not being read correctly upon loading into the program in either of my copies of MMS / MEP or
• Video Easy

  4 answers, most recent on 3/13/2024

  RE: Video Easy-Do Your Keyboard Arrow Keys Respond?
  @johnebaker Thanks John, I see Movie Studio does (n't) the same thing in Storyboard mode. Arrow keys only for jumping between objects, not frame advance. Get what you pay for! 😲
• Movie Studio

  34 answers, most recent on 11/26/2025

  RE: MP4 audio going out of sync
  @emmrecs Hi Jeff . . . . details about your computer  . . . . Ronald gave these here in the first paragraph. @ron-griswold Hi I can replicate the issues with the MPG NTSC 29.976 fps file. On a long file (~ 5 hours duration) the audio does go out of
• Movie Studio

  6 answers, most recent on 2/20/2024

  Strange MediaInfo results
  Greetings, Yesterday I added another couple of DV tapes to my computer via firewire for editing. I usually use WinDV for this but I thought I would try MS2024 for the job. It worked without a hitch. Then out of curiosity I thought I'd try Virtualdub
• Video Pro X

  12 answers, most recent on 3/12/2024

  RE: VPX14 cannot output edited video at the same frame rate as the source
  @tom_frank Hi. The only video editor I know of that can be fudged into working with 120 fps (and possibly higher) frame rates within the editor and exporting them at the same frame rate is Adobe Premier Pro and then it is only possible to export
• Movie Studio

  3 answers, most recent on 2/8/2025

  RE: Exporting the finished file.
  @Jamshed-C After you've done that, to your question, the best way is to set up your movie settings (Key E, or File>Settings>Movie) to your desired export format. For UHD (I assume you don't actually want the REAL 4K, which isn't 16:9), set the
• Movie Studio

  32 answers, most recent on 4/2/2026

  RE: Export quality from RTX Ti3060 far inferior to UHD770
  @AAProds Greetings Al, Ever since the Nvidia 590 series driver debacle just before Christmas 2025 I've had problems with my 4060 - possible slightly different to your because I'm using MS2025 which hasn't had the updates. I rolled the driver back to
• Video Pro X

  5 answers, most recent on 3/31/2024

  RE: Deinterlacing old footage VHS Lagarith with good results possible?
  Yes I appreciate the comments guys. I was going through VD2 with the LAGS AVI then doing a crop away black bars head switching noise fuzzy edges. Normally I crop away the fuzzy edges the use the add borders in black and re centre the cropepd frame
• Video Pro X

  58 answers, most recent on 1/21/2024

  RE: Poor result on still image travelling
  @CubeAce  @AAProds @Former user @MME007 I knew the forum videos got re-encoded as my uploads always look worse quality wise when posted here but wasn't aware it changed the fps. Good catch Al. It explains why my 50fps uploads look more stuttery
• Video Pro X

  44 answers, most recent on 2/4/2025

  RE: Problem with exported DVD
  @AAProds @johnebaker I think I'm beginning to get somewhere! The Deinterlace in VDub did not work to any great extent, but removing the TBC from the input chain did! I now have a capture whose export and burn to DVD is not plagued by ghosting and
• Movie Studio

  15 answers, most recent on 5/14/2024

  RE: frame rate
  Yes different frame rates can cause problems, MMS is having to change 30 into 50 or vise versa, 30 doesn't divide into 50 equally so frames have to be discarded (or whatever the right term is). Magix has not altered the rates because when I right
• Movie Studio

  51 answers, most recent on 12/14/2024

  RE: How to burn files to BD with menus but without having to re-encode?
  @jak.willis Because if I’m encoding in 720x576 then it will be throwing away some pixels - am I right? Surely the answer to that largely depends on your original files. If the source of those files was anything above 1024x576 then pixels surely
• Video Pro X

  15 answers, most recent on 2/2/2024

  RE: Recording from Atomos Zato has serious video/audio offset drift
  @sjmackinder HI . . . . new Atomos Zato and have found a serious video/audio offset drift. . . . . Assuming you still have MediaInfo installed, analyse one of the clips causing the issue. In the Text view, video section of the analysis if you see
• Other products

  18 answers, most recent on 1/1/2024

  RE: New AI program by WinxVideo on presale with discount.
  @johnebaker @AAProds @Marc-Goder @emmrecs This is from one of my very early cameras that also had video GeneralComplete name                            : C:\Users\Ray\ Willow_vm.movFormat                                   : MPEG-4Format
• Movie Studio

  43 answers, most recent on 7/18/2024

  RE: Can not trim or delete portions of audio
  @Eric-Elliott Hi Eric, Therefore, the easier and maybe less time consuming option in this case is to re-do the audio completely. Absolutely false! You need to learn how to edit properly - trim as you have been told or simply adjust the start or end
• Movie Studio

  6 answers, most recent on 2/20/2024

  RE: Strange MediaInfo results
  @me_again 'Tis a mystery. Definitely has top and bottom fields, and it is BFF: open it in VDub, set the Deinterlace filter to Yadif, Double Frame Rate and you'll see the smooth frame advance in BFF and jerky motion in TFF. GSpot reports it as 50