• Movie Studio

  70 answers, most recent on 9/19/2025

  RE: Reasonably affordable graphics card for Magix Movie Edit Pro Plus
  @me_again It has crashed so many times since I lasted posted. The PC didn't crash, when ouputting a video file, it freezes, nothing is clickable/ That screen cap is while the Magix is frozen. Task Manager is saying it's using resources, but the
• Movie Studio

  25 answers, most recent on 10/8/2025

  RE: Issues with MAGIX Video deluxe 2026 Plus
  More new problems!So the phantom object thing still persists and haunts me, and thankfully the previous solution seems to work fine, but now it's causing a weird audio issue... I probably can't do it justice in words, but ... the audio from one clip
• SOUND FORGE

  4 answers, most recent on 5/14/2025

  RE: RMS Level
  Thank you. I am working with the volume while recording now. I am assuming normalization, compression, etc. comes after recording. Do you know what effects are altered other than loudness when the ACX export tool is used? This has been a steep
• Photostory

  One answer, on 3/18/2025

  Hangs, does not ever complete
  trying to export as video. Tried exporting several different formats, e.g, avy, mp4, mpg. Program just hangs after getting over 96% done.Tried software and hardware encoding. Program is unresponsive, must fill using task manager. No error
• Movie Studio

  70 answers, most recent on 9/19/2025

  RE: Reasonably affordable graphics card for Magix Movie Edit Pro Plus
  @Reyfox Hi. Hmm. The Magix website is very vague about it's use with AMD graphics. INFUSION Engine 3 supports video acceleration and export for AVC and HEVC on Intel, NVIDIA or AMD GPUs with 1 GB VRAM or higher Example: Intel Graphics HD 520, NVIDIA
• Movie Studio

  2 answers, most recent on 6/13/2025

  RE: Video deluxe 2026 Plus 3d problems
  @keiron Hi . . . . .  it states select all photos, select effects, choose stereo 3d, chose stereo pair, this creates another set in time line 2, however both time line 1 and 2 are still both stereo images, not the left and right is this correct? . .
• Music Maker

  One answer, on 6/19/2023

  RE: [Solved] Export sound with APU_ModerEQ_x64
  @Tomasz-Szwej The crash could be caused by your audio driver settings. In the Music Maker program settings select the Audio/MIDI tab and select an ASIO driver. If you don't have an audio interface with ASIO drivers you can select the Music Maker
• Movie Studio

  9 answers, most recent on 1/29/2025

  RE: No sound / audio in player and export
  @jackger Hi Thanks for the mediaInfo data, I can see no issues with the exported file. Can you post a MediaInfo analysis of the VOB file. . . . . movie edit Pro - 16 Ver 15.0.0.90 . . . . I have Movie Eit Pro 2016 ver 15.0.0.114, - you are missing
• Movie Studio

  6 answers, most recent on 12/15/2024

  RE: Uploading YouTube video
  @Nani425 Hi For uploading to Youtube it is better to export the video as h.264/AVC encoded (MP4), File, Export movie, Video as MPEG-4, you can then check the video on your computer before uploading to your channel using the Youtube
• Movie Studio

  9 answers, most recent on 5/14/2024

  RE: Movie Studio 2024, How can I convert the mv_ to mp4?
  @Chris-Royster  I used Movie Studio to edit. Prior to getting this 2024 version, I would export the video into mp4 and then be able to upload. Chris, are you new to this version? The old version of Movie Studio, made by Sony, was completely
• Movie Studio

  19 answers, most recent on 11/3/2024

  RE: program crash on export after 5 minutes movie studio 2025.
  @spuddy13 Hi Brian Thanks for the feedback - was there a transition, effect or change of video/image format at the point where you split the timeline for export? John EB
• Movie Studio

  69 answers, most recent on 8/10/2025

  RE: Unable to import MKV files into Video deluxe 2026 Plus, Windows 10
  Hi @AAProds I do have HuffyYUV 2.1.1 installed on my machine and I can export it using MMS2024 as an AVI file which can be read by the system (obviously, since it created it). I renamed your HuffyYUV from MKV to AVI but didn't have the same success.
• SOUND FORGE

  8 answers, most recent on 4/21/2026

  RE: Play head disappearing in SF18 Pro
  Hi Rick, thanks for all that. I had toggled F and also tried \ to centre the play head, but to no avail. I haven't tried F6, but at one point, I zoomed out from the wave form and could definitely see which part of the audio file was playing and the
• Movie Studio

  13 answers, most recent on 9/8/2025

  RE: Nvidia RTX 5080 Graphics Card | But MEP 2026 suddenly stopped using it
  I have attached below the advanced settings for 25fps vs 50fps.The 25fps (and even when using 30fps) uses my Nvidia Graphics card for the export.But the 50fps refuses to use the Nvidia card.(Zero changes are made | Simply changing to fps from 25, to
• Video Pro X

  12 answers, most recent on 3/12/2024

  RE: VPX14 cannot output edited video at the same frame rate as the source
  Click on the 3 dots and enter 60 FPS manually.With H264 (AVCHD) and H265 (HEVC) Magix only allows exports up to 60 FPS. Exporting to WMV also allows 100 FPS. However, exporting to WMV does not require hardware acceleration.  
• Video Pro X

  62 answers, most recent on 5/15/2025

  RE: Should I choose Video Pro X or Vegas Pro?
  @AAProds @ghijohansson @Reyfox @Can-Dive @ericlnz Hi Al. I downloaded your conversion which is really impressive and I ran in sync with the supplied original. I could not spot one difference stopping at various points along the way. I have not in
• Video Pro X

  25 answers, most recent on 10/24/2024

  RE: Working with GoPro Timelapses
  @johnebaker Hi John, AV1 (mp4) files are, as far as I can judge, well editable on the timeline of Pro X16. But to be able to export as an AV1 (MP4) file, a very fast video card is a must. See: rtx-30-series-av1-decoding I myself still have an NVIDIA
• Movie Studio

  9 answers, most recent on 5/28/2026

  RE: Split video in to separete frames
  @badbob @AAProds has given you the basics of the operation but, I have to ask: why would you want to do this? Given that video runs at 25 frames per second (PAL) or 29.97 frames per second (NTSC), a video of anything more than a few seconds is going
• Movie Studio

  69 answers, most recent on 8/10/2025

  RE: Unable to import MKV files into Video deluxe 2026 Plus, Windows 10
  @Gra_Ham In all cases quality is pretty poor I've digitised some Video8 tapes in the last couple of years and they've come out great so don't believe the naysayers. I suggest you play a tape to the TV (Yellow Video Out + RCA audio cables) and see
• Samplitude

  2 answers, most recent on 3/18/2024

  RE: WAV Export creates multiple tracks - unwanted
  @Former user Please show us step by step how you export. There are multiple ways to export audio
• Video Pro X

  32 answers, most recent on 1/18/2025

  RE: "Missing" audio in VPX16
  @emmrecs Hi, I tried your file, VLC & MPC Player play it without problem. MMS & VP22 don't have audio, the track is there but no sound. Shutter Encoder plays the file in it's program with sound no problem but exporting (Start Function) as
• Movie Studio

  11 answers, most recent on 1/12/2026

  RE: Video Deluxe 2026 - Access Violation Code - Program Crashes
  @SHANE-KOHUT Hi In add ition to @emmrecs comment "ntdll.dll" issues can be caused by drivers for, among other hardware items, the GPU. . . . . Nvidia 3080ti. . . . I have uploaded the latest drivers . . . . There is an issue with the latest 591.xxx
• Video Pro X

  58 answers, most recent on 9/12/2024

  RE: [Closed] VPX/MMS update schedule
  the added Infusion engine that increased export times dramatically *decreased 😉 @AAProds Correct 👍 Doh! 🤦‍♂️😂
• Audio Cleaning Lab

  14 answers, most recent on 3/4/2025

  RE: saving to MPEG 4
  @jamesglynn Please be aware these are public forums and personal data, like your email address, should never be posted here. Hence I have edited your post. MPEG4 is a video format so I am a little confused as to what SFACL4 has to do with this