• Movie Studio

  179 answers, most recent on 4/16/2022

  RE: Video Pro X12
  @Reyfox Hi. Not because you asked but because I had temporary need to disable my Intel GPU from my system and can share my limited experience of just having an nvidia 1650 Super running MEP and VPX. NB Titler Pro 7 ran faster but not supper fast I
• Video Pro X

  61 answers, most recent on 1/31/2023

  RE: Exported video not matching up with finished edit producted
  @AAProds Hi Al. Thanks for the info. The sound track should still be linked and kept in sync to the video if put onto a separate track unless the broken chain icon is used to separate the tracks and does, at least at first, do that. On subsequent
• Video Pro X

  61 answers, most recent on 1/31/2023

  RE: Exported video not matching up with finished edit producted
  @jjgrober Hi. I'm going to call this in as a possible bug with VPX and MEP 2022. I have now tested with various OBS settings and with my own camcorder files which should be OK and the problem persists. I even tried with other file types. Both
• ACID

  8 answers, most recent on 3/16/2022

  RE: Acid Pro 9 - songs drift out of sync
  Are your source clips in MP3 format or some other lossy format? I ask, as I have seen this problem, especially with VBR MP3. My source clips are in WAV format, and the same rate and depth. I have had mixed rates and depths and not noticed this
• Video Pro X

  9 answers, most recent on 3/5/2022

  RE: X12 - 3D Decorative Basic Title Template issues
  @Photo_G @browj2 @Greg-P After looking at John Brown's comment on another thread about the project needing to be at 30fps I did a few more tests. Any rounded number of frames above 30 fps seems to work, so 30, 48, 50, and 60 fps are fine and do not
• Movie Studio

  179 answers, most recent on 4/16/2022

  RE: Video Pro X12
  @Photo_G @Reyfox Hi, A little aside here. This is something that I wanted to mention to you on the Vegas forum about resources in MEP/VPX that can be used elsewhere. Templates, Movie Templates & Editing Templates Under Templates, Movie Templates
• Movie Studio

  8 answers, most recent on 3/4/2022

  RE: Where is old video stabilization?
  23.976 is a standard NTSC frame rate which can be used on Blu-Rays. Removing the pulldown by detelecining is necessary for restoration and editing a telecined NTSC movie. Also, if you wish to do upscaling, this has to be done. I know how to analyze
• SOUND FORGE

  9 answers, most recent on 3/4/2022

  RE: I've got white noise after installing Sound Forge 15
  @Jonathan-Harwood Hi . . . . It's across all computer sounds including Apple Music in iTunes. Any time the computer makes a sound or a ding... a burst of white noise at the same time. All audio playback on the PC is accompanied by white noise. . . .
• Video Pro X

  4 answers, most recent on 3/2/2022

  RE: VPX13 Viewing, Playback and Export Problems
  @browj2 Hi John The results you are getting are very odd. I leave the three Device options set to the RTX2060, preview play back lightning off, no proxies. I have been doing some other testing with 4 1920 x 1080 clips each 1/4 screen for collage
• Video Pro X

  4 answers, most recent on 3/2/2022

  VPX13 Viewing, Playback and Export Problems
  Hi, VPX13 v. 19.0.2.150 As you can see from my signature, I have what I consider to be a very high-end machine. Using the same 1920x1080 video clips that I have been using for my examples and tutorials for years now, I can easily get VPX13 (and
• Movie Studio

  34 answers, most recent on 2/28/2022

  RE: Stops working after udate
  @Wengsman @johnebaker @ericlnz @emmrecs @AAProds Hi. It clearly states on the box that it is compatible with Windows 7/8/10. This is why I bought it.   The box if it states that would be correct and that version is clearly running all be it not
• Movie Studio

  2 answers, most recent on 2/26/2022

  Magix Movie Edit Pro Premium running super slow.
  I'm using newly installed MEP Premium 2022, this program is so slow, I'm not a newcomer to Magix I also Have 2013, 2014, 2015 and 2016, they all play smooth video in the monitor no problems. With 2022 I've done everything possible Rendering, Proxy,
• Video Pro X

  22 answers, most recent on 3/2/2022

  RE: Wich CPU, Graphic card for VPX 13?
  @Reyfox Hi. I'm not sure about that. There are times within a project when my nvidia card is doing very little while the Intel GPU is almost maxing out and vice versa and other times neither GPUs do anything and the CPU maxes out or both GPUs work
• Video Pro X

  22 answers, most recent on 3/2/2022

  RE: Wich CPU, Graphic card for VPX 13?
  @Reyfox Hi. What is needed is a project that everyone can test on their particular systems and the results can be compared. Then users with the same plugins can compare with a "base" project. 34 minutes to render... wow....   I did that some time
• Movie Studio

  26 answers, most recent on 2/25/2022

  RE: Program Constantly Freezes. Can't Use to Edit.
  @AAProds I don't disagree this version has been very bug ridden but not every hiccup is a bug. Some, and it would seem, quite a few problems are hardware compatibility problems. We have had numerous amounts of those as well. I am not defending Magix
• SOUND FORGE

  9 answers, most recent on 2/22/2022

  RE: Recording Delay
  Try another device driver for playback. You may want to try the ASIO-4-ALL driver which works well for many folks You must have (or had) Audio Studio installed at some point since SF Pro does not install the Magix Low Latency 2016 driver:driver.
• Movie Studio

  48 answers, most recent on 2/25/2022

  RE: No 4K Icon Thumbnails and poor playback.
  As @johnebaker pointed out MEP does not export to 10 bit even though it can import such a file. The program does not contain,nor I think can handle the 10 bit colour profile for export which is not an option for MEP and is constrained to using BT
• Movie Studio

  48 answers, most recent on 2/25/2022

  RE: No 4K Icon Thumbnails and poor playback.
  I think I wrote in the wrong box. Here it is a again in black rather than grey: Ray, please see my last post about MEP 2016 smoothly playing back my 4k timeline clips but not completely rendering out the movie. To answer your question the latest
• Movie Studio

  48 answers, most recent on 2/25/2022

  RE: No 4K Icon Thumbnails and poor playback.
  @hatfieldphoto Hi Phil. If you want specific information on components or prebuilt machines that may do the job (often they don't as prebuilt machine often do not have both an Intel GPU on the CPU as well as an nvidia graphics card) then please
• Movie Studio

  48 answers, most recent on 2/25/2022

  RE: No 4K Icon Thumbnails and poor playback.
  Well I'm not out of the woods yet. I appreciate all your help on this forum. I now see all the thumbnails having changed File>Settings>Program... Device Options tab. settings to "CPU" I tried the playback quality briefly (it seemed OK) then
• Movie Studio

  21 answers, most recent on 2/23/2022

  Am I using MXV files incorrectly.
  I have created a project approximately 41 minutes in length using MP4 files at 25fps at 1920 x 1080 which I only added effects to and then managed to export as an MXV file of approximately 42.4GB at (I assume) the same frame rate and
• Music Maker

  One answer, on 2/14/2022

  Not creating any backups
  First lets set it strraight that I know where the backups would be and how to locate them. The problem is the program is not creating any backup files. When Im editing a track and if I use control z, its wiping out all the audio effects done to
• Movie Studio

  22 answers, most recent on 2/13/2022

  RE: Portrait clip on top of portrait clip, Size/Position/Rotation is weird
  @Former user Same problem in VPX13. I used a portrait image, duplicated, moved, no image. Click on Effects, Video effects, Sharpness and the image returns, even without adding any effect. Click back onto Size/Position/Rotation and play and the image
• Video Pro X

  25 answers, most recent on 5/16/2022

  RE: Video Pro X Keeps Freezing And Crashing
  @Antoine-BBTV Hi Antione. 16GB of ram is more than enough to edit up to 4K resolution unless you use a ton of additional effects. For 8K editing 32 GB should be required as a minimum in my opinion. Having an odd stick will mean that stick is running