• Movie Studio

  43 answers, most recent on 7/18/2024

  RE: Can not trim or delete portions of audio
  @Eric-Elliott Hi Eric, I'm not sure I can work in frames with still pics, I have to work in time or it will not make sense to me Read what I wrote. Put a photo on the timeline at the very beginning. Put the playback marker at the beginning of the
• Movie Studio

  66 answers, most recent on 1/29/2025

  RE: The output formats are messed up in Movie Studio 2024
  The problem with aspect ratio is that there are 2 definitions for it. One definition relies on the number of pixels horizontally and vertically. The other is the display aspect ratio which tells subsequent programs how to display the particular
• Movie Studio

  34 answers, most recent on 11/26/2025

  RE: MP4 audio going out of sync
  john , i used a pinnacle dazzle as my interface between my pc and VHS player. i then used Magix video recorder and saved directly to a folder on my pc. my pc specs as follows. processor . intel i9-9900k , motherboard gigabyte z390-e , hard drive 500
• Video Pro X

  12 answers, most recent on 3/12/2024

  RE: VPX14 cannot output edited video at the same frame rate as the source
  @tom_frank Hi . . . . shoot 1080p-100 fps video . . . . Is this with a camera or mobile phone? . . . . why VPX can't output with AVC or HECV codecs in an MP4 wrapper  . . . . The maximum framerate for 'standard' h.264 (AVC) and h.265 (HEVC) video is
• Movie Studio

  14 answers, most recent on 2/21/2024

  RE: Preloading slow, wave display does not match audio /Movie Studio 2023
  @jeesa2 Hi. The one thing I notice about your OBS files is they do not show any frames per second in the audio section. I don't know if that is part of the problem or not, only that my OBS recordings do show a normal expected frame rate. Also why
• Other products

  27 answers, most recent on 1/7/2025

  RE: DVD Architect Studio 5.0
  Of course, recording a 4K movie (3840x2160) is possible. 50 frames per second - no problem. I've been recording these for 2 years. My own videos from a camera or drone in 4K quality. Then processing in Vegas for the full film. Vegas gives files in
• Video Pro X

  13 answers, most recent on 9/22/2024

  RE: Bug in Video Pro X 16
  @preacherallen Hi Re the Activate video playback - from the manual:- .... Activate video playback: With this option, you can display the project window view on an additionally connected monitor. Without additional hardware, you can play a preview in
• Video Pro X

  8 answers, most recent on 5/6/2024

  RE: Transition centered on a cut
  @tpolakov A way: set up your fade in and out on one object (I find the Object Trimmer good), then RC Video Effects>Copy. Then paste them onto the other objects. You can select all the other objects and paste in one hit if you wish. I'm not aware
• Movie Studio

  41 answers, most recent on 2/6/2025

  RE: How to fix or smooth de-interlaced content?
  Here's a MP4 snippet render of a conversion to 50 frames per second of the Deint file (00059) using the RIFE plugin of AVISynth. It's not perfect (see the bouncy titles at the start) but does a pretty decent
• Movie Studio

  40 answers, most recent on 11/24/2023

  RE: Movie Studio 2024 Choppy/Laggy MP4 playback/preview
  GeneralComplete name                            : Format                                   : MPEG-4Format profile                           : Base MediaCodec ID                                 : isom (isom/iso2/avc1/mp41)File size                  
• Movie Studio

  35 answers, most recent on 9/14/2023

  RE: Frame Could Not Be Calculated
  @sunago @johnebaker @Former user @Former user Hi. I too unfortunately can't find the Atomic (Atomar) Title as my collection doesn't go back as far as 2015. I am also confused by the line. Length: 4s (20 frames) Is that five frames per second total
• Movie Studio

  32 answers, most recent on 10/29/2023

  RE: blip/hiccups at start
  @AAProds @emmrecs @browj2 @john-x Hi Al. I don't know whether Jeff will agree with me on this or not but just as there is no one fix for all problems with the video section. I feel there is no one fix for all solution to all sound problems when
• Video Pro X

  20 answers, most recent on 3/20/2024

  RE: ASIO drivers and audio handling in general.
  @johnebaker @Kraznet This is something I myself have complained about on this forum in the past but have come to realise the cause is down to hardware. Move a slider and the volume change is not instant. The more buffers used and the more sample
• Movie Studio

  43 answers, most recent on 7/18/2024

  RE: Can not trim or delete portions of audio
  @Eric-Elliott Hi Eric, Therefore, the easier and maybe less time consuming option in this case is to re-do the audio completely. Absolutely false! You need to learn how to edit properly - trim as you have been told or simply adjust the start or end
• Movie Studio

  69 answers, most recent on 4/9/2024

  RE: VHS captures, video "washed-out"
  @AAProds, I think you may have sent me the Deinterlaced version of the video. Frame rate is 50fps and progressive. Pixel aspect ratio = 1. Doesn't that mean square pixels?
• Video Pro X

  6 answers, most recent on 7/1/2024

  RE: ACHIEVING TRANSPARENCY
  I use the term MMS (Magix Movie Studio) & VPX (Video Pro X), the way the two work is identical I believe. @MCK Hi, yes any B/W image can be used, If the camera isn't moving ie. it's on a tripod that is a bit easier, the building just needs
• Movie Studio

  16 answers, most recent on 1/9/2024

  RE: [Closed] Using GPU and CPU together for encoding process?
  @johnebaker, The Hardware Acceleration issue occurs with pretty much all videos I have tested, including the following.Also, it's a single layer BD, but I have lowered the bitrate a lot. To about 11000Kb/s. It is still higher than it needs to be. No
• Video Pro X

  8 answers, most recent on 5/22/2024

  Project folder unnecessarily trims the clips
  Hi Everybody, The Video Pro X16 unnecessarily cuts clips to 28 frames when I put it from project window to the project folder and I can't revert it. Is there a setting that prevents this strange behavior or is this a bug? (Windows 11, i7-11700K, 64
• Video Pro X

  25 answers, most recent on 10/24/2024

  RE: Working with GoPro Timelapses
  @johnebaker Hi John. The moon is reflected sunlight and astronomically speaking relatively close to earth so similar exposures can be used as when filming in daylight. The video is also suffering thermal shimmer but nice zoom capabilities 😅👍. Hand
• Video Pro X

  34 answers, most recent on 2/18/2024

  RE: NVIDIA 4070 issues on most basic video editing work
  MME007, yes, you have every right to be disappointed; you have a rocket ship there and to have this sort of thing happen would be incredibly annoying. As I've alluded-to though, I think this is an isolated case, unfortunately with your particular
• Video Pro X

  29 answers, most recent on 12/14/2023

  RE: Video showing black in timeline and on export
  @Lillian-Fidler Hi Lillian. You have the wrong frame size and frame rate set for that video file which probably doesn't help (or it is different from other clips used in the project) but @browj2 was also asking to know the settings I also described
• Movie Studio

  51 answers, most recent on 11/17/2023

  RE: MAGIX Movie Studio 2024 Platinum problems
  @johnebaker AviDemux has incorrectly written the Fields per second of the original video as the Frame rate I've reported this on the AVIDemux forum. @CubeAce I notice in your converted file the frame rate for video states 50fps whereas the original
• Video Pro X

  5 answers, most recent on 12/17/2023

  RE: Creating a frame for a video clip in timeline
  @Lillian-Fidler So making them slightly smaller and adding a frame.  Another way: put your image/frame on track 1 (the uppermost track on timeline, but the lowest track of the video); Drag your video onto track 2 In Effects, choose Size Position
• Movie Studio

  32 answers, most recent on 6/30/2024

  RE: Scrolling Suggestion-Thoughts Please
  @Gid In VideoRedo do you have to click the top of the timeline to place & move the cursor? As far as placing the the cursor/play marker at the desired point to start playing yes, you have to drag to place the Play marker. But, and this is what I