• Movie Studio

  6 answers, most recent on 5/29/2015

  Out of Sync: Audio Appears Ahead of Video, MEP 15 Plus
  I am using MEP 15 Plus, ver. 14.0.0.172 I downloaded a 15th Anniversary sermon from iTunes and imported it into MEP 2015 Plus. The audio is heard first, then the video catches up. Clearly out of sync, and it gets worse as the video progresses.
• Movie Studio

  12 answers, most recent on 4/20/2015

  MEP 15 PLUS: Mainconcept's MPEG-4 Export Options
  What is the general rule of thumb for setting the following options in Movie Edit Pro 15 Plus? For example, I'm looking for something like,"If the Bit Rate is set to 1000, then set HSS to roughly equal that, and set CPB to at least 3 times
• Movie Studio

  5 answers, most recent on 4/13/2015

  RE: When I try to export two tracks at 1920x1080 the 1st track is black
  Hi Are you on the latest update for MEP 2015? It should be the one John CB stickied at the top of the forum. It is common for Magix to tweak export preset settings in patches and the latest 14.0.0.172 is no exception. If you are already on it
• Movie Studio

  12 answers, most recent on 4/22/2015

  RE: Video Clips shows on Timeline but Some disappear in exporting
  Hi,   Are you using only four tracks? If so I don't see how you managed to get even this far, as even the simplest collages need more. Switch to 16 by pressing the 'E' key to get your project settings:   You still haven't
• Movie Studio

  12 answers, most recent on 4/22/2015

  RE: Video Clips shows on Timeline but Some disappear in exporting
  Hi,   Are you using only four tracks? If so I don't see how you managed to get even this far, as even the simplest collages need more. Switch to 16 by pressing the 'E' key to get your project settings:   You still haven't told us which
• Movie Studio

  3 answers, most recent on 6/21/2015

  In Movie Edit Pro 2013, the playback marker disappears and does not show the playback position during playback. It is there when first starting the program and works briefly.
  In  a fresh and clean installation of Movie Edit Pro 2015 I am losing the playback marker. I have used Magix for versions 14, 15, + 17. I have never seen this problem before. When I play a new video the playback marker moves on the first couple of
• Movie Studio

  24 answers, most recent on 3/29/2015

  RE: How do I control / section background video for templates in Magix Edit Pro 2015
  Once again, can't see for lookin'. Found the wedding - it's called Afternoon, not Wedding and I was looking in the wrong place. As I suspected, the video playing in the frame is not actually in the button, which is transparent except for the
• Movie Studio

  18 answers, most recent on 6/12/2015

  DBK error MEP 17
  Hi...I am getting a dbk error when trying to burn, log below. Can anyone suggest what is happening please. Much appreciated. Many thanks Ray E r r o r :   8 4 E r r o r :   8 4 E r r o r :   8 4 14/03/2014 06:39:11.913:  
• Movie Studio

  10 answers, most recent on 3/10/2015

  RE: have been using MEP2013 with no burning problems, Now bought MEP15 and insits on burning PAL Disks
  Bummer! Did you try the latest patch, 14.0.0.172? Did you check everything, from the source file, project settings, burn settings, advanced burn settings (that is where I had something go wrong - on the second screen of the Advanced, a setting
• Movie Studio

  6 answers, most recent on 3/1/2015

  RE: How do i Import MOV files on Magix Movie Edit Pro 16? I have installed Quicktime. Operating system is windows8
    Hi . . . . Magix Movie Edit Pro 16 . . . . windows8 . . . That is the issue - MEP 16 is not compatible with Windows 8. The program installs OK, however this may be one of the incompatability problems which arise, another common
• Movie Studio

  7 answers, most recent on 3/1/2015

  RE: How do I re-install iClone 2 SE Magix Edition from Magix Movie Edit Pro 14 Plus Download Edition?
  Hi Try reinstalling MEP 14 and telling it to do a repair of the installation - iClone is part of that installer. John I know this question is around 3 years old now, but Re-installing never did work.  I never got IClone2 back, it
• Movie Studio

  3 answers, most recent on 2/28/2015

  RE: Audio of of sync after exporting
  There was another update of MEP2015 this week to 14.0.0.172. See the sticky at the top of this forum for details. Try it out to see if it helps any. I have had my share of stuttering with MEP2015, and have now turned off everything that should
• Movie Studio

  One answer, on 2/26/2015

  RE: 3d morph heart
  Hi i have tested the 3D morph Heart fade in MEP 2015, and it works and exports OK. Can you give us more detail of how you used the effect and post a screenshot of the timeline - cropped to show the section of the timeline with the effect and
• Movie Studio

  25 answers, most recent on 3/6/2015

  RE: can not open my saved work
  Have you exhausted the possibility of using a recent backup? MEP 14 should by default have been set to make these, placing them in your current project folder, with names like I did not find any automatic backup Did you search your
• Movie Studio

  10 answers, most recent on 3/10/2015

  RE: have been using MEP2013 with no burning problems, Now bought MEP15 and insits on burning PAL Disks
    I just noticed that the patch Securityman sent me is actually the 14.0.0.166 which I have already installed a few days ago, see the about image below GeraldC You beat me to it. As I said in my previous post: "...it seems that you're
• Movie Studio

  10 answers, most recent on 3/10/2015

  have been using MEP2013 with no burning problems, Now bought MEP15 and insits on burning PAL Disks
  I am unable to burn an NTSC Disk in MEP2015. I have read 20 + posts on this issue and nothing seems to help me fix my problem. All settings from what I can see are set to NTSC, have upgraded to latest version MEP15 - Version 14.0.0.166 - Posts
• Movie Studio

  25 answers, most recent on 3/6/2015

  RE: can not open my saved work
  Hi Terry, These are your qy¡uestion I suppose Edit: I've started up my MEP 14 to check, and it certainly should open an MVD, in any of  a variety of ways, including the one you seem to be using, offering to close any existing project. So it's
• Movie Studio

  19 answers, most recent on 2/23/2015

  RE: choppy video after edit and render to mp4
  Hi All My tests with MX confirms the following:- Uncut clip - no problem in timeline or export. Trim 2 sec 15fr - OK Trim total 3sec 14fr - jerk 1:15 caused by duplication of frame 15 and occurring every second from there but at 4th sec.
• Movie Studio

  4 answers, most recent on 2/25/2015

  RE: Encoding problems with MEP Edit Pro 2015
  Hi, There have been many problems burning with MEP2015. Which patch version do you have? The latest is 14.0.0.166.
• Movie Studio

  3 answers, most recent on 3/6/2015

  MEP 2015 Premium: Error during burn and abort happens only when "Standard DVD PAL AC3" option
  Some help please. Magix Edit Pro 2015 Premium, Version 14.0.0.166 (UDPP3) MS Windows 7 PC with 12GB Ram C: drive has 238GB free, and 1.81TB free on D: drive. The program is on C drive and the work files are saved on D: drive. After a
• Movie Studio

  8 answers, most recent on 2/15/2015

  RE: Update patch 14.0.0.116 FAIL!
  Update to my problem: Hello, I've un-installed and reinstalled MEP 2015 Premium, now running the version before the latest patch. I can once again burn to any media but my original problem still resides, but to a lesser degree. Now encoding my
• Movie Studio

  5 answers, most recent on 2/11/2015

  RE: I saved files from my email that was taken on iphone. When i login into the movie edit pro to create a dvd. the video in the media pool is has a distored green color in the video. Why is this and can it be corrected?
  Hi Pamela, To find out which version you have, simply look at the top of the MEP screen at the left. Mine says MAGIX Movie Edit Pro 2015 Premium, followed by the project name. Also, click on Help on the top menu, About Magix Movie Edit Pro, and
• Movie Studio

  25 answers, most recent on 3/6/2015

  RE: can not open my saved work
  Hi Walter, I was about to leave it as Jeff summarised but I first took a closer look at your rather fuzzy screenshot. (That poor resolution is down to Magix, and is why I usually upload my screenshots and illustrations to Dropbox if there's any
• Movie Studio

  25 answers, most recent on 3/6/2015

  RE: can not open my saved work
      But, have you ever registered the program?  Recent versions require you to enter your serial number on a screen, which checks this number against the MAGIX database and then "authorises" it to run fully AND removes that "Trial"