• Movie Studio

  11 answers, most recent on 1/31/2024

  RE: on load, the welcome screen hangs
  @Amir-N Hi Thanks for the system specification. DELL Inspiron 3593, 16Gb memory, Intel i5 CPU, Display driver NVIDIA GeForce MX230, Screen Resolution 1920 x 1080 x 60 hz, OS: Windows 11 Home Is the Intel integrated graphics chipset enabled in the
• Movie Studio

  20 answers, most recent on 12/3/2023

  RE: Installing Movie Edit Pro 2014 on Windows 11
  @emmrecs Hi Jeff. At present I don't need jBridge as my current DAW can use both 32 bit and 64 bit fx and soft synths but I'm not sure about that compatibility when Win 12 arrives. I don't know if you have noticed but running a 32 bit effect uses
• Movie Studio

  5 answers, most recent on 6/4/2024

  RE: Zawieszanie się programu
  @Mich_mich8787 Hi . . . . SSD drive connected via USB 3.0 and it just hangs. . . . This should be OK if you are working with FullHD 1920 x 1080 resolution video endoded with h.264/AVC or h.265/ HEVC source videos. Hhowever if you are working with
• Movie Studio

  14 answers, most recent on 5/6/2023

  RE: Intro/ Outro animations
  @Demys-frank Hi. I have just been looking at your processor specs and it will not fully support the  RX 550 as the card is PCI-express 3 and your CPU only supports PCI-expess 2. You may be no better off or not much better off. Ray.  
• Video Pro X

  3 answers, most recent on 1/2/2024

  RE: did not download
  @wolves99 Hi Not a lot to go on - we need more information to help diagnose the issue(s) you are having: Which Magix or Vegas program are you upgrading from: Video Pro X Movie Edit Pro, Magix Movie Studio 18 or later version Photostory Vegas Pro or
• Movie Studio

  3 answers, most recent on 3/31/2024

  RE: error during export
  @PeterB-Andersen Hi We need more information: Computer specification, Windows version and program version, see this topic for what is required and please quote processor and graphics card make/model in full. I would suggest you put this information
• Movie Studio

  4 answers, most recent on 11/8/2023

  RE: Movie Edit Pro 2021
  @Mike3914 Hi From the error message the faulting module nvopencl64.dll would suggest that the issue is with Nvidia GPU drivers - are they up to date? What is the specification of your computer system including Windows version and program version,
• Movie Studio

  38 answers, most recent on 12/25/2023

  RE: Problem with Movie Studio Edit 2024 Platinum
  @Robert-Doherty Hi We need more information to help diagnose the issue(s) you are having: The specification of your computer system including Windows version and program version, see this topic for what is required and please quote processor and
• Movie Studio

  31 answers, most recent on 4/3/2024

  RE: MEP 2022 freezes for 10-seconds everytime | 30-seconds after startup!!
  In answer to the above questions:1) Yes I do update my driver via Nvidia.(Current driver is V 551.86 / Released & Installed on 19th (March 2024)2) I have in previous months/years gone down to as little as 5GB available on my C-drive, but never
• Movie Studio

  13 answers, most recent on 8/24/2024

  RE: Movie Studio Freeze constantly
  @Jiri-Veverka Hi . . . . And please don't ask me stupid questions like which CPU, Video memory, which movie etc. . . . . Not doing so, and getting the information requested, means we cannot help you resolve the issue you are having. The issue is in
• Music Maker

  6 answers, most recent on 7/28/2023

  Recording problems. Music playback starts skipping when recording.
  I constantly go back and forth between the wav driver and music maker ASIO when I'm making songs. When I make a song with magix I use loops and live guitar and vocals.. When the audio starts skipping as I'm recording it completely throws me off and
• SOUND FORGE

  28 answers, most recent on 1/27/2025

  RE: INSTALLING LEGACY PLUG-INS
  More crazy stuff. I re-booted the computer several times. The Izotope Mastering Suite opens now finally to a strange screen I've never seen before in the other installs on my other computers which are all Windows 11, but, were installed a long time
• Photostory

  9 answers, most recent on 12/29/2023

  RE: Travel Maps version 5.0.0.500 crashes
  @andrew-foxon Hi I have tried several images jpg and png with TM 5.0.0.500 and have no issue, I am on Windows 11. . . . . The PC is the same, the version of Windows is the same and the graphics card is the same. . . . What are the PC and laptop
• Rescue Your Videotapes!

  4 answers, most recent on 1/9/2024

  Cannot activate the Video Saver! (2023) software
  I bought the Video Saver! (2023) software directly from magix.com and installed it from the CD I received (only as admin was I able to do it). I registered the VideoSaver product, and it was successful. Next, I tried to activate it, and I received
• Movie Studio

  8 answers, most recent on 3/21/2024

  RE: Add-on compatibility with upgrade
  @cocobacon Hi, Yes. The additional content that comes with MEP/MMS will probably not need to be updated. You will be advised. The additional content is put in a public folder under Video Content. The installation of the program detects whether or
• Video Easy

  21 answers, most recent on 6/7/2024

  RE: Video Easy no longer recording audio in stereo
  @Eric-Elliott Computers are something, they become obsolete the minute you finish building it. It is impossible to keep up. My rig is about 2 years old, but it is an antique compared to today. I'm somewhat surprised my processor is good enough
• Video Pro X

  34 answers, most recent on 2/18/2024

  RE: NVIDIA 4070 issues on most basic video editing work
  Thanks for your replies. I probably wasn't clear in my description. Both video extracts have been issued with Magix, exactly the same way. None is the original. The only difference is that the first one has been exported right after its import and
• ACID

  2 answers, most recent on 10/5/2024

  Acid Pro Clickin Pops Not Asio Problem,Mouse movement Click Problem
  Hi I have been having problems with clicks and pops whilst using Ap !0 +Ap 8… First place to start 1;Preferences use slower updates check box = unclick 2 Asio Audio Settings .buffering setting 0ms (8 samples) Increased this up to 11ms (512
• Movie Studio

  9 answers, most recent on 12/12/2023

  RE: Cannot render video MP4 but sound ok
  @gaunt Hi. Unfortunately I agree with @Former user. If your motherboard only officially supports PCIe Gen 2 graphics cards then the system is too old and cannot run above direct X 10 computations. Although you could put a gen 3 nvidia card in a Gen
• Video Pro X

  One answer, on 10/2/2023

  [Closed] Magix Vegas pro 20
  Not sure if this is correct Forum for my product - please advise if not. Reposting this query as appeared to get a curt & unhelpful response from ericlnz Bought this licenced software in March 2023 from Magix. Vegas Pro 20.00 Build 370. Used
• Movie Studio

  11 answers, most recent on 3/22/2023

  2.10 v 2.4 GHz Movie Studio 2021 Requirements
  Hi Everyone,   First let me say: Forgive my tech ignorance. I've been using Magix Video Easy for a long time to edit my videos. I'm considering upgrading my software to Movie Studio 2021 (since it's on sale) to try something new, and update my
• Movie Studio

  17 answers, most recent on 7/28/2024

  RE: Issues with super fast videos or delayed audios
  @rbritz1970 Hi The most likely problem is the source videos are encoded with a variable framerate. Download and install MediaInfo and analyse one of the clips causing the issue and post the results, see this tutorial on how to setup MediaInfo and
• Movie Studio

  32 answers, most recent on 7/29/2024

  RE: Deinterlacing-How does Magix do it?
  @Can-Dive Hi. I'm using version 1 but I think improvements may be minimal in Vs 2 going by the examples given on their website here. Look at the slow-mo of the family on the beach. Pay particular attention to the arms of each person and the gaps
• Movie Studio

  2 answers, most recent on 5/24/2024

  RE: MAGIX Movie Studio 2024 suite problem with( x3D) static cannot be read
  @elvis-t5033 Hi This is a Windows issue, possibly a failed update, do the following: Check for any failed updates in Windows settings, Windows update, Update history for any failed update.  Check your system for malware - I use Malwarebytes, the