• Movie Studio

  41 answers, most recent on 12/7/2018

  RE: How do I make LOGO STINGERS
  Hi, Group = Link. The correct term is Group.   As in almost all Windows programs, to select more than 1 thing, hold down the Ctrl button and click on each one. It will highlight or, in MEP, turn yellow. If, when you select one object in MEP, others
• Video Pro X

  22 answers, most recent on 11/16/2018

  RE: [Feedback] How do you like version 16.0.2.288?
  @MAGIX_Redaktion Mathias, I really like some of the new features - layer colours, designating target track for importing, and flexible track handling. However, we still have the outstanding list of problems that need to be resolved. Here is the
• Movie Studio

  One answer, on 11/3/2018

  RE: Is it possible to make section of my video have 'camera shake' effect?
  Absolutely it can be done. Automated? Not so much as far as I know. If you look at the bottom of page 144 of your pdf manual it will give you the basics of how to go about it but it is a manual process. There is more than one way to get the effect
• Photostory

  11 answers, most recent on 10/13/2018

  RE: Photostory Deluxe 2018
  Hi Larry, Further to Jeff's excellent points, here are a few more comments: 1. I treat almost all photos with PaintShop Pro and a plug-in called Athentec Perfectly Clear. This gives my photos more pop, sharpens them and corrects exposure. I also may
• Movie Studio

  3 answers, most recent on 9/25/2018

  RE: Cant figure out how to properly delay the text during title displays
  Hi, Which version of MEP do you have and is it Plus or Premium...or just basic? Assuming that you downloaded and installed the extra content and have a recent version of MEP, then under the Templates tab in the Media Pool, Image objects, Test
• Movie Studio

  16 answers, most recent on 11/11/2018

  MEP2019 - patch 209 - previous list of bugs/problems for updating
  Hi, A new patch 18.0.1.209 was issued today with the following fix:* Fixed: performance problems when moving objects Below is the list of problems that I had prepared for the previous patch - 205, I believe. Following patches 207 and 209, I would
• Movie Studio

  21 answers, most recent on 11/27/2018

  RE: Movie Edit Pro - New version 2019 - New Features
  @johnebaker Hi John, Thanks for checking VSCL. Does this also happen with VPX? Do you get an error like the one that I posted? I also get the message that the audio is being used by another program, always have when the program didn't work. I
• Movie Studio

  21 answers, most recent on 11/27/2018

  RE: Movie Edit Pro - New version 2019 - New Features
  @browj2 Hi John . . . . It seems that I have many clips of when it was not supposed to be recording, and missing clips when I told it start recording . . . . Been there - had some recordings of very strange conversations on the trams in Melbourne
• Movie Studio

  21 answers, most recent on 11/27/2018

  RE: Movie Edit Pro - New version 2019 - New Features
  @browj2 Hi John OT: . . . . drowning worms . . . . I used to teach them to swim 😆 ! Back to your questions: 1. Titles - "Professional title animations  No sign of them anywhere - I can only assume Marketing were ahead of themselves or it did not
• Movie Studio

  9 answers, most recent on 8/17/2018

  RE: menu encoding failed - MEP 2018
  @nick_vid Hi . . . . I did have a look but that seems a long winded way round it when the issue has only just occurred . . . . The original tutorial was written for my old PC which baulked at handling more than 3 timelines in one project, hence the
• Movie Studio

  3 answers, most recent on 8/12/2018

  RE: Brutal learning curve with Edit Pro Plus...
  @Kaywahjay Hi . . . . Is the pop-up project file that appears each time I open the program the best way to begin a new project for easily saving the progress that I've made? or is there a better, and simpler way to save my projects? . . . . That
• Video Pro X

  12 answers, most recent on 8/7/2018

  RE: Output Volume Level question
  Hi Seamus, I use (from the manual): "Normalize (EBU R128) EBU R128 is a transceiver standard that normalizes the audio signal to -23 LUFS (loudness units relative to the digital full level). Unlike normalizing to the maximum level, this provides
• Movie Studio

  6 answers, most recent on 8/16/2018

  Picture / Object disappears when I try to resize or move it!
  So I've recently been trying out the Magix Movie Edit Pro trial package and I've been enjoying it so far, but I've been struggling with an annoying issue - when I place picture files (png) onto the timeline, and then try to resize them and move them
• Video Pro X

  26 answers, most recent on 10/24/2018

  RE: [Feedback] How do you like version 16.0.1.268?
  Hi all, I just checked. I think I had the Direct Sound to output to my headphones through my M-Audio M-Track interface, which has it's own ASIO driver, but I'm not sure. When I started up VPX, it showed Primary Source - my speakers. I switched to
• Movie Studio

  28 answers, most recent on 7/30/2018

  RE: Slideshow wizard - increasing slide durations
  Hi Terry, The old problem remains, but its due to have effects. Using the latest patch (today) of VPX, which, I presume, uses the same SlideShow Maker version as in MEP, gave me varied results that may depend on the effects used and the music. First
• Video Pro X

  72 answers, most recent on 7/26/2018

  RE: [Closed] [Feedback] How do you like version 16.0.1.255?
  @MAGIX_Redaktion While we're on the topic of problems, here are some additional ones to consider for the Edit Trimmer in addition to the one that I already indicated. I can do up a video on these. The image below shows the numbering as per the
• Video Pro X

  72 answers, most recent on 7/26/2018

  RE: [Closed] [Feedback] How do you like version 16.0.1.255?
  @MAGIX_Redaktion Here are a couple more to add to the list. See my thread on speed tests and my test project that has major problems exporting a short project (5s) with a NB effect on an image. 19. NewBlue OFX plugins have started giving a black
• Video Pro X

  72 answers, most recent on 7/26/2018

  RE: [Closed] [Feedback] How do you like version 16.0.1.255?
  @MAGIX_RedaktionHi MathiasI am pleased to report the last 2 major edits I have done have had no freezing or crashing issues.A couple of days ago I posted a comment on a windows update that came through on 26/June.It has been my suspicion for a while
• Movie Studio

  33 answers, most recent on 7/1/2018

  RE: 2 little questions about video editing / software
  Hi, I still don't understand about "...without a pause button which holds the footage and then plays it/audio in micro-segments..." Stop=Pause. A second button would be redundant. You can't be paused or stopped and not stopped at the same time. Bear
• Video Pro X

  72 answers, most recent on 7/26/2018

  RE: [Closed] [Feedback] How do you like version 16.0.1.255?
  WOW I’m a happy camper so far. No crashing at all on a 10 camera edit. None of the points John CB mentioned affect me so I can’t comment on those. A couple of things since 236,242 and current. 1. Undo doesn’t stay where the cursor is. It jumps to
• Video Pro X

  72 answers, most recent on 7/26/2018

  RE: [Closed] [Feedback] How do you like version 16.0.1.255?
  @MAGIX_Redaktion Hi Mathias, The nested sequences was resolved, and I haven't had a crash all day. It's looking a lot better. We'll have to see if Doug's problems have been resolved. Below is my updated list, including some new bugs (and old bugs).
• Movie Studio

  2 answers, most recent on 6/19/2018

  RE: Missing Options in Movie Edit Pro Premium
  Hi, Did you update to the latest patch - Help - Update online? From what you say, you went through the Install extra content and downloaded and installed the 10 or so files? The manual is somewhat behind the changes that have been made in the last
• Web Designer

  3 answers, most recent on 6/17/2018

  RE: How can I make a chronologic photo / text list that can be updated?
  Hey there Jakob. This is an excerpt from the help files that may give you the capability that you need. I created a text box which would need to be lengthened for height as required. then anchored the picture to a certain point in the text. I then
• Video Pro X

  32 answers, most recent on 6/20/2018

  RE: [Closed] [Feedback] How do you like version 16.0.1.242 ?
  I have now installed the new version on my desktop. I copied over my Video_Pro_X.ini file and the .pmly (window setups) files over to the new version and everything worked fine. I can confirm that for Bugs point 6 in my previous post and Resolved