• Movie Studio

  10 answers, most recent on 3/6/2024

  RE: 2023 Version keeps on freezing up
  I am running CAD/CAM on the same computer without any issues. Device name    DESKTOP-H2CP63JProcessor    11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz   2.80 GHzInstalled RAM    16.0 GB (15.7 GB usable)Device ID  
• Video Pro X

  7 answers, most recent on 10/30/2024

  RE: Is there a way to change the timeline seconds? For syncing.
  @jake-h Hi The time scale cannot be changed, however VPX 16 does allow audio to be move and placed between frame boundaries, you must zoom in sufficiently to do this as shown below. Achieving single figure milli second accuracy is not possible. The
• Movie Studio

  32 answers, most recent on 10/29/2023

  RE: blip/hiccups at start
  @emmrecs Jeff, don't go too deep. What's the solution/workaround with Magix video editors? Ray has suggested a 1-2 frame crossfade.
• Video Pro X

  28 answers, most recent on 9/24/2023

  RE: VPX14 Chroma Key not as good as MEP2014's?
  Thanks for your patience everyone - I've got access to the computers now.... @browj2 Under Help > "About MAGIX Movie Edit Pro 2014" I get...MAGIX Movie Edit Pro 2014Version 13.0.2.8 (UDC2)...I can't see anything in that page about basic, plus or
• Video Pro X

  58 answers, most recent on 1/21/2024

  RE: Poor result on still image travelling
  Hi Ray, My TV is 4k and smoothly displays all four fps rates (25,30,50 and 60). All video being produced from the same still image. My monitor ("QHD" 60Hz only) displays the 30 and 60 fps smoothly but 25 and 50 fps are jerky. The issue is that
• Movie Edit Now

  16 answers, most recent on 10/22/2024

  RE: Cannot Open Video Files Recorded With OBS In MAGIX Movie Edit Pro 14
  @browj2, @Grimbles Hi John . . . . As for using OBS files, there should be no problem so long as you use constant frame rate mp4 files, and definitely not mkv files. OBS warns you about the latter and you have to convert before using most video
• Video Pro X

  38 answers, most recent on 9/7/2023

  RE: H264 Export Frame Rate of 16.67 Possible?
  @CubeAce Ray, it's not so much frames being repaired as being created out of thin air to replace the duplicates inserted when the frame rate is changed from 18 (or 16.67 in my case) to 25 or 50. Only then will you have smooth flow and a proper
• Movie Studio

  16 answers, most recent on 12/18/2023

  RE: Slow Export AVI to MPEG4 with RTX 3060
  @me_again, @AAProds Hi Andy . . . . "Standard" formats such as 4:3 and 16:9 . . . . EXCEPT export anything in 3:2 format . . . . Not quite, you cannot export at 3:2 AR unless the project/video resolution width and height for export are divisible by
• Movie Studio

  51 answers, most recent on 11/17/2023

  RE: MAGIX Movie Studio 2024 Platinum problems
  @johnebaker The reason Al's conversion to mp4 container file format is because this does support MP2 audio streams. John, after the remux to MP4, the file still has the two audio streams, and Magix opens it in a flash. The "problem" must be in the
• Video Pro X

  25 answers, most recent on 10/24/2024

  RE: Working with GoPro Timelapses
  Thanks for all the advice here, I really do appreciate it.  Per the previous comments of some of the suggestions. Here's what I've tried before and since. Sorry for the long message/narrative :-). On the setting the frame rate to 1 and dropping in
• Video Pro X

  29 answers, most recent on 9/13/2025

  RE: Kodak C330 audio
  @AAProds, @nicolesharp100 Hi Al . . . . .  H264 below 24fps; I don't know if VPX does . . . . . It does not . The minimum framerate of 24 fps is a legacy 'cinema' look, and, although the h.264 encoding can go as low as 5 fps, however anything below
• Movie Studio

  41 answers, most recent on 2/6/2025

  RE: How to fix or smooth de-interlaced content?
  Here's a MP4 snippet render of a conversion to 50 frames per second of the Deint file (00059) using the RIFE plugin of AVISynth. It's not perfect (see the bouncy titles at the start) but does a pretty decent
• Video Pro X

  58 answers, most recent on 1/21/2024

  RE: Poor result on still image travelling
  @MME007 Hi Marc Thanks for the MediaInfo data - that is a 'standard' JPG format, I was hoping it was not an interlaced image format. As the higher frame rate is much smoother, was the export encoding at 24 or 25 fps? John EB
• Movie Studio

  15 answers, most recent on 6/8/2025

  RE: Export results not accurate to settings.
  When you create/open a new project the program will ask you what size & frame rate you want. Yes, this is usually good enough, but I'd never needed to export then reimport a file before, and when it said the exported file did not match the
• Video Pro X

  8 answers, most recent on 5/6/2024

  RE: Transition centered on a cut
  @tpolakov A way: set up your fade in and out on one object (I find the Object Trimmer better: you can set the fadeout number of frames), then RC Video Effects>Copy. Then paste them onto the other objects. You can select all the other objects and
• Video Pro X

  12 answers, most recent on 3/12/2024

  RE: VPX14 cannot output edited video at the same frame rate as the source
  @Former user Hi Gid. I thought as much but did not want to suggest anything I hadn't tested or had seen information on. I suspect there are other editors that can do it as well but my routing around looking for unusual frame rate export
• Movie Studio

  25 answers, most recent on 8/7/2025

  RE: Any decent support for Insta360 videos yet?
  @Reyfox I guess you are referring to 360 edited final video? The software can export to various other formats. Yes that is correct. I am referring to the immersive 360 video file that can be created. This type of file is limited to H264. Just
• Movie Studio

  32 answers, most recent on 7/29/2024

  RE: Deinterlacing-How does Magix do it?
    Question: what does it all mean? What's the purpose of the droplist? Should that be set on what the source file is or is it used to change the output? eg if I have an interlaced DV-AVI, do I choose Full frame ie for a progressive output, or BFF
• Video Pro X

  29 answers, most recent on 12/14/2023

  RE: Video showing black in timeline and on export
  I'm not sure that the GOP is the issue here. The second file I sent Lillian also had a GOP of 250 (as far as I can tell; there is 10 seconds between I-frames at 25fps in AVIDemux); that file worked OK.
• Movie Studio

  2 answers, most recent on 8/16/2022

  [Solved] Capture Snapshot of Video
  How can I capture a still frame of an MTS video source in Movie Studio 2022 Suite? I'm running a Surface Book 2 running Windows 11.
• Movie Studio

  4 answers, most recent on 1/15/2024

  RE: BUG - Video deluxe 2024 - Pressing undo once undoes last 20-50 steps
  @Jonas-F Sorry, I may have misunderstood your post. You are trying to undo settings made in effects? Personally I either delete an effect in the key frame editor or reset it in the effect or reset it via right clicking on the object and select reset
• Movie Studio

  8 answers, most recent on 11/29/2024

  Using Vegas Video Stabilization
  Hi,I have Magix Movie Studio 2025 Suite v.24.0.1.221 Windows 11 Pro X64 11th Gen Intel(R) Core(TM) i9-11900KF @5.3 GH RAM 32GB NVIDIA GeForce RTX 4060  The video I'm working on is digitized from an old VHS tape and needs all the TLC it can get ;)My
• Movie Studio

  25 answers, most recent on 10/22/2023

  RE: Movie Studio 2023 freezing with 4K input
  As requested profile updated The help/about info gives the program that works as Movie Studio 18 Platinum 18.1.0.24 The files being added are all MP4 files as created by a Panasonic Camcorder. It does not freeze after any particular file. From Media
• Movie Studio

  14 answers, most recent on 10/29/2024

  RE: MEP 2023 | 2 video files (in 1-day) have been exported with corruption
  @Apollo89x Hi. if you are getting problems with HEVC recording, personally I would stick to using H264 which according to the iPhone 14 web page the phone supports. That would cut down possible problems with the video footage as H264 is a much more