• SOUND FORGE

  9 answers, most recent on 10/6/2021

  RE: Cant record my dj mix into soundforge 15
  Which version of Sound Forge 15? Is the DJ mix coming from an external playback device? Is it an analog or digital input? Can you otherwise hear the sound on the destination PC?We need more details to help you. Read the 'Sticky' at the head for the
• Movie Studio

  4 answers, most recent on 10/5/2021

  RE: Transferred to new computer. Not showing Project timeline, only video
  @david-watkin Hi If @browj2 suggestion does not work try the following: Using Windows file explorer browse to the folder in the address bar type in %appdata% and press Enter, see image below:  Open the folder - MAGIX\Videodeluxexx_version - where
• Movie Studio

  18 answers, most recent on 10/3/2021

  RE: Lagarith Lossless Codec
  @jak.willis My guess would be, and it is a guess, that Lagarith is still recording each pixel separately but how the pixel data is represented may be written differently using slightly less code. It is a 'lossless' codec. There is at present no way
• Movie Studio

  23 answers, most recent on 10/3/2021

  RE: Non-standard Export Frame Rate in MP4.
  @Richard-Curtis I understand your reticence completely about getting rid of any original material. For me it is about 10" reels of quarter inch tape which has master copies of work I did in studios in the 70s. About 450 of them. I had my tape
• Movie Studio

  23 answers, most recent on 10/3/2021

  RE: Non-standard Export Frame Rate in MP4.
  @johnebaker @CubeAce Hi John, Ray 1. I believe that one recommendation for this was to use a 2 step process - export the project at the new framerate as MXV (or AVI if you want to archive the project at the higher framerate) and then import the
• Movie Studio

  23 answers, most recent on 10/3/2021

  RE: Non-standard Export Frame Rate in MP4.
  Hi Richard . . . . . interpolated frames largely destroy any attempt to stabilise a clip . . . . . I believe that one recommendation for this was to use a 2 step process - export the project at the new framerate as MXV (or AVI if you want to archive
• Movie Studio

  23 answers, most recent on 10/3/2021

  RE: Non-standard Export Frame Rate in MP4.
  @Richard-Curtis @CubeAce @Richard-Curtis Hi, Ray, to answer your question, my 8 mm and Super8 mm were digitized using a Wolverine at 1080 20fps. 8mm was filmed at 16 fps so I simply changed 20 to 16 under Speed. S8 was 18 fps, so changed from 20 to
• Movie Studio

  22 answers, most recent on 9/30/2021

  RE: Failure to hold image rotation
  Replying to the last two comments: That is precisely my problem. It does not remember the rotation when the project is reopened, no matter how I do it. I have tried rotating it with another app outside the program, using the rotation tool in the
• Movie Studio

  11 answers, most recent on 9/29/2021

  RE: Uncompressed AVI files give very large data rate
  @jak.willis Any 'codec' is an instruction set that tells the computer how to construct the data into a file that can be read by another program. In this case to show a video. Compression or not does not come into the equation. It is still an
• Movie Studio

  14 answers, most recent on 9/29/2021

  RE: [Closed] Please send new Ticket number
  I have been getting very quick responses when lodging support tickets with Magix - some time within single digit hours.
• Movie Studio

  11 answers, most recent on 9/29/2021

  RE: Uncompressed AVI files give very large data rate
  @jak.willis Basically the data rate is too huge for the TVs processor to keep up with, even if it could read an AVI encoded file. Or the usb flash drive is not fast enough which could be another reason. Last but not least, a lot of digital TVs only
• Movie Studio

  11 answers, most recent on 9/29/2021

  RE: Uncompressed AVI files give very large data rate
  @jak.willis Correct. There is neither no gain or loss. Any 'lossy' compression codec means exactly that. Some information is irrecoverably lost. Even if you have a camera that records raw, if the camera is set up wrong and either over exposes or
• Movie Studio

  11 answers, most recent on 9/29/2021

  RE: Uncompressed AVI files give very large data rate
  @jak.willis Correct. There is neither no gain or loss. Any 'lossy' compression codec means exactly that. Some information is irrecoverably lost. Even if you have a camera that records raw, if the camera is set up wrong and either over exposes or
• Movie Studio

  22 answers, most recent on 9/30/2021

  Failure to hold image rotation
  I posted this problem once before but did not get a solution. I am using movie Studion18 Platinum, version 18.1.0.24 on a Windows 10 machine with all updates. I cannot get the program to hold a rotation. I am preparing a slide show from images taken
• Video Pro X

  122 answers, most recent on 11/21/2021

  RE: Proposed new computer specs for using VPX
  @johnebaker Hi John. The Western Digital Blacks have a five year warranty. Mine have lasted much longer. I only use them for current projects with all files needed on the drive at the time. A copy of which is on the second Black drive. Original
• Movie Studio

  12 answers, most recent on 9/22/2021

  RE: VOLUME CURVE IN MEP
  @VideoPro So the white line becomes the "ceiling" right? Green lines going above that line will not have any impact? The 'ceiling' is when you run out of bit bits in the bit depth selection of the audio recording which is always represented as 0db
• Music Maker

  One answer, on 9/21/2021

  My download link doesn't work
  I recently bought a digital download of music maker from guitar center. They emailed me a link that would take me to the Magix website and install my program. But when I press the link, it says 404 page not found. I tried contacting guitar center
• Movie Studio

  7 answers, most recent on 9/22/2021

  RE: Unclear on 29.97 and 30 Frames Per Second
  The answer is basically historical. 29.97 is the NTSC TV system framerate for the USA and countries that use NTSC. The UK and many other countries use the PAL system which is 25 fps. Then along came digital and phones that take video. The phone
• Movie Studio

  2 answers, most recent on 9/16/2021

  RE: activation
  @JulesJH From where did you obtain the installer for the 2021 trial version? From what you describe, I wonder whether you actually have the trial version installer for 2022, since I would doubt the 2021 version is still available? Strictly speaking,
• ACID

  2 answers, most recent on 9/15/2021

  RE: Feeling misled
  @Mark-Mackenzie You can also use the free version with a GUI https://makenweb.com/SpleeterGUI The stem quality is much better than what stem maker could do in the past. It's also very likely that your other stem creation software you have mentioned
• Video Easy

  No answers, created on 9/14/2021

  Problem to load video
  When i try to load video from digital camera there is only possiblity to use "integrated camera (USB-D show)". According to manual there should be alternatives (Composite or S-video). Now the program takes data from my computers intergrated camera.
• SOUND FORGE

  2 answers, most recent on 9/13/2021

  RE: SFAS updated from v.10 to v.15; still a black art, right?
  Aside from basic EQ, comp/limiting and the other 'usual' plug-ins and tools for cleaning up live music recordings . I have been using Steinberg's SpectraLayers Pro. Noises and such that cannot be adequately attenuated in SF, can be in SLP. It can
• SOUND FORGE

  One answer, on 9/11/2021

  Error Code
  I am receiving an error each time I attempt to start up the program. It states application initialization has failed, and gives me a two digit negative number.
• Movie Studio

  12 answers, most recent on 9/11/2021

  RE: How to install Cinepak codec.
  @CubeAce, @browj2 Hi . . . . I'm not aware of any such undertaking for any video formats. . . . . There are archiving standards for media format - however these are either set by a government standards organisation, or by the archiving organisation,