• Video Pro X

  34 answers, most recent on 9/25/2022

  RE: Title templates - dynamic titles disappeared after export
  @browj2 @Former user Hi John. That is not the issue. The issue is not being able to use the nvidia card for all hardware acceleration settings for export when it plays with those settings and objects within the program and not even having to revert
• Movie Studio

  24 answers, most recent on 8/1/2022

  RE: Fail to adjust the frame rate for blue-ray disk (BD)
  @dirkc_be . . . . don't support - by default - the 1080i 50fps video's. . . . . The interlaced format and frame rates are 'left overs' from when the old CRT TV's and monitors which supported frame rates of 25 fps (PAL) and 29.97 fps (NTSC) were in
• Photostory

  26 answers, most recent on 8/17/2022

  RE: Burning a DVD
  All of the photos in the slideshow were taken with my Canon EOS Rebel T1i/EOS 500D digital SLR camera. I have used this camera to produce several Photostory Easy slideshows between 2014 and 2019. The camera features CMOS sensor with 15.10 effective
• ACID

  4 answers, most recent on 9/15/2022

  Faulty Playback When FX Are Applied (Acid Pro 8, Acid Pro 11)
  *I have recently upgraded my laptop workstation and entertainment system from an HP Beats Laptop 2015 Model (AMD Quad Core Radeon 6 CPU, 1TB HD, 8 GB RAM) at which I was running Acid Pro 8 with no problems aside from a casual lag due to my project
• Video Pro X

  34 answers, most recent on 9/25/2022

  RE: Title templates - dynamic titles disappeared after export
  @CubeAce @browj2 Hi, sorry went for a kip 🥱👴😁, VPX14, I bought it so I'm trying to use it more than MS2023 just to get used to it & see what the differences are, Everything i've been doing has been MP4 AVC 3840x2160 UHD/4K (call it what you
• Rescue Your Videotapes!

  33 answers, most recent on 7/28/2022

  RE: VHS capture quality is very poor
  @cmclernon Thanks. I would proceed as JohnEB has suggested; you want absolutely the highest quality you can get, and MXV should give that to you. After you have your MXV, then you can export it to MPEG-4 as full HD. It is a pity that these manuals
• Video Pro X

  3 answers, most recent on 7/30/2022

  RE: Graphics card inquiry
  @1940 Cost benefit analysis! 🙂 I can only dream of such a card at the moment but in my mind, there are only two questions: does it actually work ie is it stable, and how fast does it render videos compared to what you have now, verses how much it
• Movie Studio

  81 answers, most recent on 7/25/2022

  RE: HEVC/H.265 files in Magix 2021 premium
  @Scenestealer @johnebaker Peter, John, sorry for the tardy response to your earlier queries! My memory (pardon the pun) was piqued by the latest HEVC topic. . . . . ATI Radeon HD 4770 (512mb) which is ignored by MEP . . . . Why do you say that? It
• Movie Studio

  24 answers, most recent on 8/1/2022

  RE: Fail to adjust the frame rate for blue-ray disk (BD)
  @ericlnz But remember bitrate is measured as bits per second. The image size and number of frames per second don't come into it. That wasn't my point. My point was that that same bitrate is now spread over double the number of frames, which would
• Video Pro X

  47 answers, most recent on 8/5/2022

  RE: Video running too fast and out of sync with audio
  @sjmackinder Hi We need more information on the source video files and the export settings you are using to create the 1920 x 1080p FullHD video, and the low res video. Download and install MediaInfo and analyse one of the source video clips and the
• Photostory

  12 answers, most recent on 7/22/2022

  RE: Camera/zoom shot
  @Terry-Dunbar Hi Thanks for the images, that is interesting, I was expecting the GPU in use to be different. Is Photostory up to date with the last patch for that version - see under Help, Update online In Photostory Program settings, Display tab 
• Movie Studio

  26 answers, most recent on 8/2/2022

  RE: BluffTitler and other OuterSpace software on sale (50%) for a few days
  @AAProds Hi Al, Yes, you export to MP4 or AVI with transparency, depending on what you want. It's a 3D editor with which you can create entire intros/outros, not just titles. You create in 3D space and position or move the camera, or move whatever
• Video Pro X

  3 answers, most recent on 7/30/2022

  RE: Graphics card inquiry
  @1940 Hi. It's a slightly downgraded version of the card I'm currently using. If you are not using or rendering above 60fps at 1920 x 1080, the card will run well enough but if like me you are using 4K footage ideally you would be better off looking
• Movie Studio

  11 answers, most recent on 8/4/2022

  RE: an error occurred during proxy rendering
  @AAProds, @Jacek-Leniowski Hi Alwyn, Jacek . . . .proxy files should play without issue . . . . Agreed up to a point, throw in a collage and/or effects that are CPU intensive eg rotation and playback starts to get sticky, this was the reason I had
• Video Pro X

  26 answers, most recent on 7/26/2022

  RE: VPX vs Vegas
  @Former user Hi Gid. Your avatar is impossible to activate until you make a comment within a given topic thread. I assumed you would at least read this post at some point. 🤞 You are one of the few here that use both programs so your insights I think
• Movie Studio

  9 answers, most recent on 8/3/2022

  RE: Audio/Video sync issues in MAGIX Movie Edit Pro and its successor
  @Scott-Brown7603 Hi Technially the Intel HD 530 in the CPU is below the recommended minimum specification for Movie Edit Pro 2021, however it should not be a big issue as it can run DirectX 12, the program will run quiet happily on Windows 11. I
• Movie Studio

  43 answers, most recent on 8/25/2024

  RE: An error has occurred during export with an external video codec
  @tami-0 Hi and welcome to the user to user forums. First I would say that a smaller resolution does not reduce compression if that is what you mean by Only that I want it at a smaller pixel size to reduce the compression The way to reduce
• Movie Studio

  43 answers, most recent on 8/25/2024

  RE: An error has occurred during export with an external video codec
  @tami-0 Hi and welcome to the user to user forums. First I would say that a smaller resolution does not reduce compression if that is what you mean by Only that I want it at a smaller pixel size to reduce the compression The way to reduce
• Movie Studio

  81 answers, most recent on 7/25/2022

  RE: HEVC/H.265 files in Magix 2021 premium
  @Scenestealer . . . . ATI Radeon HD 4770 (512mb) which is ignored by MEP . . . . Why do you say that? It shows up in your screenshot of MEP program settings. The question is more "why doesn't it show up in the performance graphs in task
• Movie Studio

  81 answers, most recent on 7/25/2022

  RE: HEVC/H.265 files in Magix 2021 premium
  @AAProds Hi Alwyn Drifting OT slightly . . . . ATI Radeon HD 4770 (512mb) which is ignored by MEP . . . . Do the Task Manager, Performance charts show any activity when you try rendering a mix of images and video? John EB
• Movie Studio

  24 answers, most recent on 8/1/2022

  RE: Fail to adjust the frame rate for blue-ray disk (BD)
  @ericlnz Hi Eric . . . . .But remember bitrate is measured as bits per second. . . . . That is correct however, . . . . The image size and number of frames per second don't come into it. . . . The same bitrate used to export 25p andf 50p should
• Video Pro X

  22 answers, most recent on 8/25/2022

  RE: Crackling sound (only in Video Pro X)
  @johnebaker Oops. I don't think I have woken up yet John. My maths just went out of the window up-scaling from HD 2 MP = 1600 x 12002 Megapixel (forgot to times four 😳) Are you comparing videos of the same Level (5.1) and resolution? Compared to the
• Music Maker

  One answer, on 7/14/2022

  RE: How do I check my Loops Unlimited subscription status?
  @Cieron-Rawlings If you open the program you'll see the welcome screen. On the right side you should see your user name and unlocked edition. Under that you should see a button to manage your subscriptions. If Music Maker doesn't recognise your
• Movie Studio

  28 answers, most recent on 8/10/2022

  RE: Suddenly Movie S is not decoding Lagarith or Huffy encoding correctly
  Apparently, the problem is in the section of the MS code which decodes Lagarith. I deleted the Lagarith codec from my pc, but MS still could read the Lagarith files, but could not write them. They have their own embedded decoder which may also be