• Video Pro X

  6 answers, most recent on 1/15/2020

  RE: VPX11 - Luminance, RGB curve, Brightness, Contrast, Gamma
  @browj2 Hi John Brightness It is useful to look at the controls in MEP as being like the traditional controls on a TV or monitor. Brightness is used to raise the black level primarily. Contrast is used to raise the white level primarily and with
• Video Pro X

  6 answers, most recent on 1/15/2020

  RE: VPX11 - Luminance, RGB curve, Brightness, Contrast, Gamma
  @CubeAce For those who do not have VPX but have NB ColorFast 2, here is an image with the Waveform turned on in ColorFast and the Brightness adjusted upwards under Primary Correction. Note that Brightness under ColorFast 2 does not do the same thing
• Video Pro X

  22 answers, most recent on 1/15/2020

  RE: VPX11 - Color Space, Color Space Correction, Instruments Meter Setting
  @browj2 Hi John . . . . turning on Color Space Correction limits (or reduces?) the saturation to somewhere between 75 and 100%, so it would seem that the maximum permitted is more than 75%, less than 100% . . . I have noticed this as well, since
• Video Pro X

  6 answers, most recent on 1/15/2020

  VPX11 - Luminance, RGB curve, Brightness, Contrast, Gamma
  This thread follows along from VPX Color Space thread, and discusses adjusting for luminance levels, or what most would term as brightness levels. I would like to know how others do this, particularly for changing light conditions over the duration
• Video Pro X

  22 answers, most recent on 1/15/2020

  RE: VPX11 - Color Space, Color Space Correction, Instruments Meter Setting
  @browj2 Hi John . . . . the new Color Space settings . . . . "You can now select HDR, Full HD/UHD or SD as color space for your project in Video Pro X. . . . . the finest nuances of color and ranges in contrast. . . . . I don't know what this means
• Video Pro X

  22 answers, most recent on 1/15/2020

  RE: VPX11 - Color Space, Color Space Correction, Instruments Meter Setting
  @johnebaker Hi John, Thank you for your insight. I noticed that under export to MP4, there is no BT.2020 Color Space available, only under export to HEVC. With the exception of one of my cell phones, I shoot in 1080. I sometimes shoot at 2.7k with
• Video Pro X

  22 answers, most recent on 1/15/2020

  VPX11 - Color Space, Color Space Correction, Instruments Meter Setting
  I have been trying to figure out what this all means and how to use them: Color space under Project/Movie settings; Color Space Correction under Effects, Movie Settings; Instruments Meter settings - Global settings, Norm and Waveform Monitor -
• Movie Studio

  52 answers, most recent on 4/8/2020

  RE: Audio problem with playback of old .avi files
  @William-Murphy @johnebaker Sorry, I had to go out to work. Hi Bill. I'm glad you have a solution at last. I think the problem is in the Demuxing (or separation of audio from video). If I remember correctly the video portion of the signal is in the
• Movie Studio

  52 answers, most recent on 4/8/2020

  RE: Audio problem with playback of old .avi files
  @johnebaker Hi John. I was assuming that was his original file or at least the one he could get to play in another program without the audio problem. I didn't realise an embedded clip would be converted in format. @William-Murphy I have to agree
• Movie Studio

  52 answers, most recent on 4/8/2020

  RE: Audio problem with playback of old .avi files
  @William-Murphy Hi William. I think it more likely that perhaps maybe other programs can suppress the audio spikes which are clearly visible in the audio file. The actual video audio soundtrack level is way below what it should be. There is a noise
• Movie Studio

  52 answers, most recent on 4/8/2020

  RE: Audio problem with playback of old .avi files
  @William-Murphy Hi William. I've been looking into this a bit more. If (and I suspect it is) this video is from a camcorder using tape then the only thing I can find is this warning in the manual about using the SP mode( to lengthen recording
• Movie Studio

  8 answers, most recent on 4/11/2021

  "Cannot Open Waveform Device" Message
  I am using MEP 19.0.2.49 on a Dell Windows 7 computer. Often when I load a movie I am editing, as soon as it is loaded and I click the PLAY button, I get the message attached here and the PLAY button turns to STOP and I can't do anything! What is
• ACID

  No answers, created on 12/22/2019

  What have they done with the ACID software?
  I remember when I bought the acid music version 7 license and used it without problems, I lost my license and I left the world of production, today I went back and downloaded the trial version of version 11, believing that I had lost a lot and use
• Movie Studio

  26 answers, most recent on 1/1/2020

  RE: Media files shows WAV data, but top of screen reads "empty"
  I tried dragging the WAV file directly to the timeline, and got the option copy or import only.  I tried both.  The audio plays in slow motion, and the screen on the left is totally black, instead of showing the volume bars. Hi, Where are the WAV
• ACID

  5 answers, most recent on 12/2/2019

  RE: Loudness in Acid vs Soundcloud
  If you bring your rendered audio back in to acid, do you see the waveform essentially peaking at max volume? It sounds like you know what you're doing, but just to check you've not got the level of the master bus set wrong, or some other plugin is
• Movie Studio

  31 answers, most recent on 11/24/2019

  RE: Can't Move Objects freely - they keep snapping to points
  @Skyline_UK Hi, Did you do any of the things that I suggested? If you are trying to align your clips using the visual cues in the video, you will most like not succeed. Align the visible transients of the audio clips with the visible transients of
• Movie Studio

  31 answers, most recent on 11/24/2019

  RE: Can't Move Objects freely - they keep snapping to points
  @Skyline_UK Hi John, Did you try synchronizing the other tracks with the audio from the video like I suggested (right-click align)? If your video is recorded at 50fps, then the most that you will be out is 10ms (half a frame). I think that the
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @browj2 Hi John. That sounds what I might be after. If it reads the Windows fonts section as well then it works with fonts in a similar way to Photoshop CS6 (I stopped updating when they when online only). Can I sync what I create to a soundtrack
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @browj2@browj2 Hi John. Thank you. I may have one more go at the beginning of that one as the intention was to get the word TECH to have a beat movement to the music, A bit like a heartbeat but at the time I did it I was still and still having audio
• ACID

  One answer, on 11/19/2019

  Initialising DirectX plug-in failure
  Hi, hope someone can help, and apologies if this has been discussed on a previous post. I purchased Music Studio 11 64bit this morning and have yet to be able to use it. It installed fine, but on running the software for the 1st time it freezes
• ACID

  50 answers, most recent on 2/1/2020

  RE: ACID Pro 8 / 9 / Next - public beta versions October, 25
  I installed Acid Pro 8 beta today. At the first launch, it requested a plug-in folder.I skipped this step because I don't use 32 bit plugins.I'll see if it detected 64 bit correctly.So far a very big improvement in Beatmapper operation and setting
• SOUND FORGE

  4 answers, most recent on 10/21/2019

  RE: Sound Forge 10 Sample rate problem
  Are the new "File> New" window parameters (Sample Rate, Bit Depth & Channels set the same as the file's data being pasted? I get the same error message with both WAVE or MP3 when the new file sample rate differs from what is being pasted.
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  I had another look at the video posted by emillo and realised he had checked off MEP in the NVIDIA 3D settings and realised I hadn't done that myself. So I added MEP to the list of programs and kept to the settings as already listed. Then firing up
• SOUND FORGE

  5 answers, most recent on 10/21/2019

  RE: Sound Forge 10 Saving files, creates SFK and audio file.
  Welcome to the Magix Sound Forge discussion group @FloorInterfacing. There is nothing wrong with "still using Sony SoundForge 10". Many folks prefer it over SF-11, 12 and 13. Pros and cons I do not understand why your client only wants the