• Music Maker

  157 answers, most recent on 12/30/2025

  RE: Wishlist for the next Music Maker!
  A synth VST strictly for existing instruments.Trumpets, pianos, bass guitars, flutes, tubas, harmonicas, and so on.I'm sure I can find a VST whether in the Magix store or elsewhere, but I would simply give up several included VST's just for one
• Off topic

  24 answers, most recent on 8/10/2023

  RE: [Closed] Computer has blown up?
  @jak.willis Hi From the damage to the power connector of the drive in the right image above this looks to me like a catastrophic failure either in the drive or the powerpack. The other drive looks to be physically OK both connector strips look
• Video Pro X

  3 answers, most recent on 4/16/2023

  RE: Remove `shimmering` from a video produced by an iPhone7?
  @videomagic Hi. Yes, if you could upload a video for us to see that would be helpful as we may have different ideas on what 'shimmering' means. There are two main problems associated with panning as far as I have encountered. The first is with the
• Movie Studio

  57 answers, most recent on 8/31/2023

  RE: New Release MMS 2024....
  @me_again Hi Andy. I'm not sure I would describe such interactions as 'verging on the incestuous' just because a group or maybe just a few users happen to be in a close proximity where interests align. I volunteer locally to a large charity based
• Movie Studio

  5 answers, most recent on 1/19/2023

  RE: Camera compatibility with Magix software
  @lindeanlad To answer your second question first, yes, Movie Edit Pro has had a "rebrand" (long and dubious story) and is now named Magix Movie Studio. It is basically the same as the last few versions and you will have no trouble feeling at home
• Movie Studio

  32 answers, most recent on 10/29/2023

  RE: blip/hiccups at start
  @browj2 @AAProds @emmrecs @john-x Hi John (CB) A zero point cross over point is where there is no voltage to move a sound device from its resting place in the magnetic field, whether it be a microphone, headphone or speaker diaphragm from its
• Video Pro X

  61 answers, most recent on 1/31/2023

  RE: Exported video not matching up with finished edit producted
  @CubeAce The "high end" of video editors is within reach of far more people than the "high end" of audio is. Resolve Studio is only $300. FCP is in that range if you have an Apple. Media Composer Ultimate and Premiere Pro subscription is under $500
• Video Pro X

  148 answers, most recent on 4/18/2023

  RE: General discussion on add-ons
  @browj2 @Reyfox @Former user @johnebaker Hi John.(CB) I don't think Boris is really aiming aiming it's products at individuals but companies. Their suite of plugins are only available on a monthly or yearly subscription starting at $175 a month, or
• Video Pro X

  34 answers, most recent on 2/18/2024

  RE: NVIDIA 4070 issues on most basic video editing work
  @MME007 @AAProds @johnebaker Hi Marc. I have spent more time than I care to mention on this but for selfish reasons as much as to try to get to the bottom of this. Conclusion of what I am seeing. Tell me if anything is wrong. First, that your Sony
• Movie Studio

  11 answers, most recent on 8/18/2022

  RE: How come Magix won't allow me to record video from my video camera?
  @AAProds Hi Al. I may have misread what Dave is trying to do. If so I think you are correct. Sony seem to think there are only two programs that can import or edit that format.   Ray.
• Music Maker

  3 answers, most recent on 10/24/2022

  RE: 在Producer Planet購買的音樂素材還需要對每個音樂素材進行混音與母帶後製嗎？
  @HSUNHUICHEN 1. 不需要单独进行混音和母带处理。如果你使用人声循环，你可能想添加一些混响效果。 2. Music Maker可以以最大的16位和48kHz的质量输出。 3. 我不太清楚你的导出问题。你是否试图将你的项目导出为WAV音频文件？ 4. 不，Music Maker不做任何调整。出于安全考虑，在主总线上只有一个砖墙限制器。但其中有一个母带套件，可以让你自动为你的项目做母带。但我不知道它的效果如何。       Do I still need to do Mixing
• Rescue Your Videotapes!

  33 answers, most recent on 7/28/2022

  RE: VHS capture quality is very poor
  @cmclernon Hi. If you hear the hum on the original tape on playback it is on the recording and needs post processing. I don't now how good newer plugins are at removing hum but in the past trying to reduce hum nearly always also altered the audio
• Movie Studio

  23 answers, most recent on 5/4/2024

  RE: Movie studio platinum 2022 has no timeline and content is missing
  @chris-carb Hi Chris. With the monthly subscription (if people bother to read the terms and conditions) there is a minimum year contract and if someone wishes to withdraw early they could find themselves paying quite a bit more to cancel the
• Movie Studio

  64 answers, most recent on 11/3/2022

  RE: Anyone uploading the 2023 Movie Studio ?
  @johnebaker @me_again @AAProds Hi John. I checked on the ASUS site (And the EUFI) and my motherboard does not support either resizable Bar or a 10th generation CPU. (the second of which is no surprise.) Also, without Resizable Bar it is not able to
• Movie Studio

  17 answers, most recent on 8/22/2022

  RE: Magix Video Resolutions Incorrect?
  Sony thinks 4k is 3840 x 2160 as well: https://www.sony.com/electronics/support/articles/00044504 As does virtually every other Google hit on "what is 4k". Despite that, I now see the technical difference between UHD and 4k. Which raises a question:
• Movie Studio

  44 answers, most recent on 1/17/2025

  RE: Making Blu-rays
  @johnebaker Hi John, I agree that finding one that handles between phones to DSLRs is not easy. This one seems to be in the middle ground with a top weight limit of a couple of pounds but has various ways to mount the balance of a small camera or
• Video Pro X

  10 answers, most recent on 8/21/2022

  RE: ADVICE PLEASE
  @johnebaker Hi John. I only suggested using the Direct X 9 option due to the age of the program. I wasn't aware it could handle Direct X 11.1. @MCK Hi Mark. Laptops tend to get misused by everyone. Often actually sat on laps or soft furnishings and
• Movie Studio

  4 answers, most recent on 9/18/2022

  RE: Sony A1 video
  @Venkatesh-VTVT Hi. Video editing is very computer power intensive. The more Mbs per second the machine has to handle the higher the specification has to be just to get any video editor to play smoothly, so all components used within the processing
• Movie Studio

  44 answers, most recent on 1/17/2025

  RE: Making Blu-rays
  @CubeAce Hi Ray . . . .  the best bit of camera gear is an electronic steady-cam with x-y-z gimbal movement . . . . Agreed, however most of the ones I have looked at are designed for SLR's, and those for video cameras are in the high hundreds to
• Movie Studio

  21 answers, most recent on 12/14/2022

  RE: Movie Studio 2023 glitchy and crashing
  @Mick-Bow Hi. I can't see anything untoward in the video clip. Your system should be able to cope with that no problem. I am concerned about trying to run any VST instruments through the mixer though. As far as I'm aware there is no way to assign
• Video Pro X

  10 answers, most recent on 8/21/2022

  RE: ADVICE PLEASE
  @MCK Hi Mark. It definitely sounds like it has poor ventilation although you should never really put a laptop directly on your lap. They can get hot enough to cause light burns when the vents get restricted. We use something similar at home to a tea
• Movie Studio

  23 answers, most recent on 5/4/2024

  RE: Movie studio platinum 2022 has no timeline and content is missing
  @chris-carb Hi Chris. With the monthly subscription (if people bother to read the terms and conditions) there is a minimum year contract and if someone wishes to withdraw early they could find themselves paying quite a bit more to cancel the
• Music Maker

  5 answers, most recent on 7/2/2022

  RE: My software code has already been used, but i just entered it
  @GamaGamer Hello,Welcome I suggest you contact the electronic store. Stephen Forum Moderator
• Music Maker

  5 answers, most recent on 7/2/2022

  My software code has already been used, but i just entered it
  I purchased Music Maker Plus and a MIDI keyboard from an electronics store. I downloaded Music Maker and set up the keyboard and everything went good until I decided to activate Music Maker Plus. I clicked "Enter serial number" and entered my code,