• Video Pro X

  29 answers, most recent on 9/13/2025

  RE: Kodak C330 audio
  @nicolesharp100 Nicole, VP9 is a propriety codec. Magix will not open VP9s, I assume because it is a paid program. Free programs can open all of those "free" codecs (although I note that, even with the VP9 decoder from the MS store installed,
• Video Pro X

  27 answers, most recent on 3/3/2024

  RE: Export Video as AVI
  @Jamil-Taylor The MP4 export created at a lower video average bitrate is significantly larger than the DivX Pro conversion  Just go into the advanced Export settings for "HEVC" and change the average bitrate to 8000 (to allow for the audio) and set
• Video Pro X

  38 answers, most recent on 9/7/2023

  RE: H264 Export Frame Rate of 16.67 Possible?
  @browj2 In my case, the project is set to 29.97 fps. The original video was 20 fps, changed to 18 fps under Speed. A project of 24 or 25 fps would probably be more suitable, obviously with less frames having to be created. In any event, is the
• Video Pro X

  38 answers, most recent on 9/7/2023

  RE: H264 Export Frame Rate of 16.67 Possible?
  @AAProds It's a few years now since I did all my Standard and Super 8 off a screen. 16.67 x 3 = 50.01 hence the match. Most projectors had a three bladed shutter so each frame was shown three times. It was still only 18 fps but 18x3 i.e 54 "flashes"
• Movie Studio

  7 answers, most recent on 5/24/2024

  RE: Export fails halfway through with undescribed error.
  Thank you, John. Via Mediainfo, I can see that the file is a constant 30fps.There is no effect added to the clip, other than a transition from the previous clip - the same 8-frame crossfade that's between every other clip up to that point in the
• Video Pro X

  25 answers, most recent on 10/24/2024

  RE: Working with GoPro Timelapses
  Thanks again for the response. Correct on the image format, they are YUV 8bit 4:2:2 in the bt470bg (601?, PAL?) colorspace. Couple of things of note, I'm in the US thus have it set to NTSC (I noticed PAL in previous posts). While I do have an NVIDIA
• Movie Studio

  One answer, on 1/19/2024

  RE: Magix Short Video on hiding moving objects in Movie Studio
  @browj2 Hi John. It's definitely Hide. I recognise the tool bar in use. Useful for short clips shot at the correct angle to a usable background and a subject that is separated from other interacting objects. The faster the frame rate in my
• Movie Studio

  28 answers, most recent on 8/25/2023

  RE: new bug in MS2023 Platinum / import PNG image generate FROM MS2023
  @browj2 Hi John. Is there not a setting within Corel to produce CFR files? Again, sharp increases or decreases of frame rate (15 fps to me would seem quite an increase / decrease if sudden.) It may not be all files as some frame rate could ramp up
• Movie Studio

  8 answers, most recent on 10/17/2023

  RE: How to render with custom frame rate
  @johnebaker John, in my case, the VFR is 55.901 to 64.795, published and real frame rate 60.00. Changing the export rate to 59.67 should not cause such a huge error in run time.
• Video Pro X

  9 answers, most recent on 7/3/2023

  RE: Video Pro X changes project frame rate to 20 for no discernible reason
  @eSonOfAnder Hi, Sorry if you interpreted my comment as snide. It was intended to be instructive and to avoid confusion as other readers of the forum may not understand what you meant when you used Hz for frame rate instead of frames per second
• Movie Studio

  15 answers, most recent on 5/14/2024

  RE: frame rate
  Not sure if coinsedence but when returning to the project and importing the 30/60 the adjust dialogue box appeared. Unfortunately when importing a second 30/60 clip no dialogue box.I have asked Magix if this is normal or should the dialogue box
• Movie Studio

  18 answers, most recent on 7/12/2022

  [Solved] Go Pro Audio Issues in Movie Edit Pro 2016
  Audio "buzzing" when Importing Go Pro Hero 8 Footage. The image attached shows the Audio wave having blocks which causes the "buzzing". The Audio is perfect (as expected) when the video is played in "Films & TV" (the Windows video playing
• Movie Studio

  5 answers, most recent on 8/7/2023

  RE: magix 2023 adding a SINGLE BLACK FRAME to EVERY MOVIE???
  @Not-Applicable Hi, This UHD 30fps variable framerate clip with a partial end frame when dragged into MMS is seen as 29.97fps Exported as 29.97 No cut,  MMS exported the partial end frame (no black frame) When I cut the media on the timeline &
• Movie Studio

  2 answers, most recent on 8/6/2023

  RE: Why are 23.97 movies being exported as 23.98?
  @Not-Applicable Hi There is nothing to fix, the 23.97 the cause is the precision to which the frame rate is specified in this case the true framerate 23.976 round up to 2 dec places 23.98. You are getting the 'odd' frames per second because you are
• Movie Studio

  6 answers, most recent on 12/1/2023

  RE: Audio sync
  @Leroy-Johnson Hi If the video is from and iPhone, or other mobile device, then this is most likely caused by the video being Variable Frame Rate (VFR) Download and install MediaInfo and analyse one of the clips causing the issue , see this tutorial
• Movie Studio

  38 answers, most recent on 11/20/2023

  RE: movie studio 2023 suite - 4k video edits
  @spuddy13 Hi Brian. Well the good news is your processor is 6th generation with an HD 530 graphics chip that seems to be doing some work and you have nvidia graphics as well but I can't see what it is and doesn't appear to be doing anything do help
• Movie Studio

  11 answers, most recent on 10/29/2023

  instagram video size
  Hi, is seems that it is important to have a 1080 x 1080 frame size, so videos look good on instagram. Does anybody know how this is done in MEP? thanks :) Kate
• Movie Studio

  22 answers, most recent on 7/3/2024

  RE: MP4 variable frame rate and a possible "Cure"
  @Gid I understand what you're saying re the fps difference but I didn't re-encode to 25 fps, that's what I don't understand. I use MyMP4Box to demux to the file's raw formats then put them back together without re-encoding. The original file had
• Video Pro X

  15 answers, most recent on 2/2/2024

  RE: Recording from Atomos Zato has serious video/audio offset drift
  @sjmackinder Hi. Did you read their pages regarding using Apple Pro Res RAW? And the link to further pages on the Apple website suggesting the best solution for editing would be Final Cut Pro? This is not a mistake. ProRes RAW is a proprietary
• Movie Studio

  11 answers, most recent on 9/22/2023

  RE: Moving animated text to another position on the screen
  @Tusk Hi. The problem with that is the Animated Text file has already used the Size, Position, Rotation effect with its associated key frames to give it it's initial movement. So when you then move it using the SPR effect you give it two competing
• Movie Studio

  32 answers, most recent on 10/29/2023

  RE: blip/hiccups at start
  That's what I was getting at. My earlier pic was "half wave form". Here's the full wave form: If I come across a "zit", I can zoom in and pick a frame that is close-by but with less signal (one way or the other). In this case, frame 06 has a bigger
• Movie Studio

  34 answers, most recent on 11/26/2025

  RE: MP4 audio going out of sync
  @AAProds Greeetings Al, No, I think is the most positive answer I can give 😃, my reasoning being that when the original video is imported does the Frame Table creation affect the audio which in some way which would then be exported as a Wav and
• SOUND FORGE

  7 answers, most recent on 1/5/2025

  RE: Preventing or correcting Sound Forge AS 17 90* rotation of mp4 file
  I am having unwanted random rotation of phone mp4 videos after audio processing in SF17. This is occurring directly in SF17. I would like to figure out why - I am unaware of a phone setting that could cause this, and it does not happen on all
• Movie Studio

  37 answers, most recent on 6/21/2023

  RE: Rendered Video is flickering/pulsing
  @me_again Hi Andy. It could just be the way Windows and subsequent programs show various bits of data. I have noticed in other posts where Ryzen users post their machine specs that the screen shots do not 100% match what I see from the same Windows