• Movie Studio

  81 answers, most recent on 11/8/2021

  RE: MPEG-2 to MPEG-4
  @jak.willis I've done some comparison encodes. The secret seems to be to export your MP4 at 50fps. I set my movie properties to 50fps as well. Using the QTGMC process at 25fps, I still get dodgy video, but at 50fps for both QTGMC and MEP the video
• Movie Studio

  81 answers, most recent on 11/8/2021

  RE: MPEG-2 to MPEG-4
  @jak.willis I've done some comparison encodes. The secret seems to be to export your MP4 at 50fps. I set my movie properties to 50fps as well. Using the QTGMC process at 25fps, I still get dodgy video, but at 50fps for both QTGMC and MEP the video
• Movie Studio

  One answer, on 11/4/2021

  2019 Movie Edit Pro
  Hi all, I'm fairly new to movie edit pro and seem to have embedded a title black box in my video timeline that causes the video stream to go away for about 4 seconds. The audio continues; it definitely seems that I have added a title caption but
• Video Pro X

  86 answers, most recent on 12/31/2021

  RE: What am I missing out on by sticking to V17
  @DesertSweeper Hi, Just so that everyone knows, what you refer to as V17 is VPX11 version 17.x.x.x. The product is now VPX13 version 19.x.x.x. There is nothing wrong with VPX11. Just keep working with it. Other than changes to the engine, there are
• Music Maker

  18 answers, most recent on 10/26/2021

  RE: VST instruments failure
  @Miguel-Andrade It could be very well a bug. Have you tried to add new tracks with Saxophonia and move the MIDI objects there and to remove the problematic tracks? Does this problem also appear with new songs that are made from scratch? Crashes and
• Music Maker

  18 answers, most recent on 10/26/2021

  RE: VST instruments failure
  @Miguel-Andrade It could be very well a bug. Have you tried to add new tracks with Saxophonia and move the MIDI objects there and to remove the problematic tracks? Does this problem also appear with new songs that are made from scratch? Crashes and
• Audio Cleaning Lab

  6 answers, most recent on 10/25/2021

  RE: when are any improvements applied when cleaning? Cleaning Lab 3
  @Dave-Williams9210 Hi, SFACL is a non-destructive audio editor and is Project-based, so any changes that you make and any effects that you add are live and can still removed or edited within the project. You can save the Project and continue working
• Samplitude

  4 answers, most recent on 10/20/2021

  RE: Which time stretcher should I use?
  @beth-hall Here is a screenshot of Samplitude Music Studio. It is similar in Pro X. If you freeze a track all your audio files, MIDI files, VST effects, automation of this track etc. will be rendered into a single audio file. This means your CPU
• Video Pro X

  6 answers, most recent on 10/16/2021

  Creating fade outs and ins
  Is there a way to create fade ins and fade outs throughout one object in VP13? Basically I have a three camera shoot of a chorus and would like to be able to fade the center (main) camera in and out without trimming it into sections. This is so I
• Movie Studio

  4 answers, most recent on 10/12/2021

  RE: Overlaying still images on a video
  @amaethu There are a couple of ways of dropping the video level to "blank out" the underlying video. 1. Use the Video Effects>Chroma Key>Video Level effect to set keyframes to drop the video level then bring it back up again as needed (points
• Movie Studio

  29 answers, most recent on 10/30/2021

  RE: Performance Issue after upgrade to 2022
  @Pawel-Kowalski HiSystem is lagging when moving any file on timeline, lagging on transitions sometimes, when choose Object Effects, and choose Tempo-Pitch / resample system is locked for few second before implement chosen speed, graphic presentation
• Movie Studio

  29 answers, most recent on 10/30/2021

  RE: Performance Issue after upgrade to 2022
  Yes. My Configuration is much higher then minimum. There was no any problem with MEP 2021. All started after upgrade to 2022. My config is Proc : Intel Core i5-9400F CPU @ 2.90GHz, 6coreRAM 32MB RAMGPU : NVIDIA GeForce RTX 2070 SUPERHDD Config : a)
• Movie Studio

  16 answers, most recent on 10/1/2021

  RE: Voice Over Recording Cuts Off at Forty Three Seconds
  @CLINT-DANBURY Hi . . . . Edit >   Edit range   >  Insert blank space  . . . . This does not do what you want. This command inserts a blank space on track 1 where a range is selected, if there is an object in that range it will be split and
• Movie Studio

  12 answers, most recent on 9/22/2021

  RE: VOLUME CURVE IN MEP
  @VideoPro The default white line on an audio clip, allows you to raise or lower the volume of the entire clip from its original volume. If the passage is quiet, you can raise the volume. The 0 that you see is not the limit, it is just a knob like a
• Movie Studio

  32 answers, most recent on 9/21/2021

  RE: BIT RATE QUESTION
  @emmrecs Hi Jeff, "Do Not Adjust" means the file will NOT be conformed to the project settings Actually, Project settings do not change and the imported file is adjusted to the Project settings, is it not? @VideoPro if I click DO NOT ADJUST, what
• Movie Studio

  12 answers, most recent on 9/22/2021

  RE: VOLUME CURVE IN MEP
  @VideoPro Neither takes precedence. The green volume "curve" allows you to change the volume at specific parts of a clip/object. You can lower the volume of a portion of an object and then take it back up after that portion. The white volume level
• Movie Studio

  2 answers, most recent on 9/23/2021

  Select entire track, copy and paste to a different track, keep timing?
  I am trying to select the entire track, which has over a dozen or so audio clips in specific time markers. How come I cannot select the whole track, copy, and paste it on a new track? and have it keep the same locations of the clips? I must be
• Music Maker

  One answer, on 9/20/2021

  RE: Gradually change tempo
  @ajbent This does not work in Music Maker but you can export all your tracks as up to 8 WAV files and load them up in the free Samplitude Pro X4 Silver http://dl04.magix.net/2019/SamplitudeProX4Silver/Program/SamProX4_Silver_INT_200121_07-59.exe It
• Photostory

  4 answers, most recent on 9/19/2021

  RE: MAGIX PHOTOSTORY DELUXE 2020 do not want photos to move to music
  No I don't mean the Musical editing adjustment wizard. I was not using the Wizard and don't want to. I put all the photos into the Project by hand and set all times and transitions by hand. I selected a song from "my music" and dragged it to the
• Movie Studio

  12 answers, most recent on 9/22/2021

  RE: VOLUME CURVE IN MEP
  @AAProds @Former user Hi, I am trying to get the OP to do some homework and to formulate his questions better. For someone who claims to be a "VideoPro" I expect better. How did he get the green and white curves (actually lines)? He should tell us.
• Movie Studio

  6 answers, most recent on 9/16/2021

  RE: BEST SETTINGS FOR LATENCY?
  @CubeAce Hi Ray, My sound effects are always with the action. You have to put the sfx at the right place, listen, correct, listen correct. I use the waveform and listening along with visuals (what is showing) for editing, not automation. As I said,
• Movie Studio

  6 answers, most recent on 9/16/2021

  RE: "Edit effect curve" does not seem t do anything.
  @Former user Hi, Note: The same thing happens on Video Pro X11 Do you mean that in VPX11 you don't get the Volume interface shown by Alwyn? I don't have VPX11 anymore, but it works in both VPX12 and 13 but sometimes the window pops up in strange
• Video Pro X

  3 answers, most recent on 9/15/2021

  VPX13 New Features - What is actually new?
  Hi, I have VPX12 on my desktop, VXP13 on my laptop and have executed the additional content (I don't think there was anything new). On the Magix.com website there are several things that are marked as New, but I can't see any difference between
• Movie Studio

  3 answers, most recent on 9/6/2021

  Audio keyframe handles
  Magix Movie Edit Pro Premium (newest version installed 9-6-2021)Win10 FROM THE HELPFILE ON EDITING THE VOLUME CURVE: "...When you touch this line with your mouse cursor, the cursor is transformed from a hand symbol to an arrow. Now if you click on