• Video Easy

  4 answers, most recent on 7/13/2021

  Can't find serial number
  Hi, I live in Australia, and purchased the Kaiser Baas DVD Maker a few years ago. I have been using Video Easy SE and converting tapes onto DVD and USB for about a year or so now, but now cannot burn onto DVD without the MPEG-2 codec. However, upon
• ACID

  7 answers, most recent on 7/8/2021

  RE: Rendering with ASIO or MME drivers
  I tried rendering again, but the issue is still there. I disabled the Realtek all together but it didn't make any difference. I can live with it, but it means I have to create my final mix with the driver set as Microsoft Sound mapper and EQ out the
• ACID

  14 answers, most recent on 7/16/2021

  RE: Questioning if Acid Pro is really a 64bit host
  You literally googled "REAPER ACID theme" and linked a screen shot from over a decade ago? Lol. You do realize that those overview screenshots make this look more viable or better than it actually is. Beneath that first screen, a TON of REAPER
• Music Maker

  3 answers, most recent on 1/30/2022

  RE: [Closed] Running Magix causes Audio Renderer Error in Chrome or Edge:
  @mytotallyrealband This is caused by the ASIO driver which needs exclusive access to your audio hardware. You can solve this problem by changing the driver in the program settings to something different like Direct Sound. But then you will lose the
• Photostory

  8 answers, most recent on 7/7/2021

  RE: English Video Tutorials
  @MSA_2021 Hi These are recordings of live demonstrations - AFAICS there are no english versions. John EB
• ACID

  9 answers, most recent on 7/5/2021

  ACID loops cutting off after the first measure
  I cannot insert drum loops of more than a few measures. I'm certain others have had this issue. Please let me know what's going on. I also cannot upload my support request to your system so will really need someone to assist. MAGIX support will not
• ACID

  6 answers, most recent on 5/11/2022

  RE: Constant Crashing
  Hi everyone - this is a part-venting, but a question: I have the same problem with constant freezing with Acid Pro 10 and I am SO incredibly frustrated. I have used Acid Pro since v7 and really like its layout and functionality. I have Acid Pro 10
• ACID

  6 answers, most recent on 5/11/2022

  RE: Constant Crashing
  Hi everyone - this is a part-venting, but a question: I have the same problem with constant freezing with Acid Pro 10 and I am SO incredibly frustrated. I have used Acid Pro since v7 and really like its layout and functionality. I have Acid Pro 10
• SOUND FORGE

  17 answers, most recent on 6/22/2021

  RE: Thoughts on Sound Forge Pro EQ's vs third party plugins?
  However, now you are getting into another subject of noise reduction category tools. With EQ you can reduce some noise but in most instances you are targeting a specific frequency range that the noise is most present. For example 60Hz hum is a
• SOUND FORGE

  One answer, on 6/20/2021

  No Download Link
  Hello, I bought the Sound Forge Audio Studio 365 through your online shop. It said I should receive a confirmation email with a download link for the product. However when the confirmation email came it only gave me a serial #, order #, and a
• ACID

  No answers, created on 6/20/2021

  Setup multi-channel output to use Midas M32R with DN32 as controller
  I've got a MIDAS M32R-Live with DN32 interface card. I have successfully setup the M32R to record multi-channel audio via USB 2.0 using Acid Pro 10. However, I can only playback the Master bus into the M32R on a pair of channel inputs. I don't see
• Movie Studio

  30 answers, most recent on 6/22/2021

  RE: Error trying to use audio interface.
  @Alan-Bvid Hi Alan. Then you must use the screen capture option and not the audio one. As far as capturing the screen though, anything that appears on the screen would be a second program. A web browser would not use an ASIO driver but how web
• SOUND FORGE

  30 answers, most recent on 6/21/2021

  RE: Less-than-ideal audio into audio documentary.
  It's iZotope's world, we just live in it. Or I could go for Acon Digital Post instead and get a pretty good suite that gives iZotope a run for it's money at a fraction of the cost. It also goes on sale so it can be acquired cheaper.
• SOUND FORGE

  12 answers, most recent on 6/18/2021

  RE: Removing hum from a live recording
  Hello, Forgive me if I didn't make myself clear. I have already recorded a live message and I know that the hum is generated from the PC. The software I used to record was not Sony Sound Forge, normally I use Audacity to record and Sound Forge to
• SOUND FORGE

  12 answers, most recent on 6/18/2021

  Removing hum from a live recording
  Sound Forge Audio Studio Ver.10.0 (build 252) I have recorded a live sermon and there is a constant hum in the background that I want to remove, but am not sure how or what tools will help me accomplish this. Using Win 10 64-bit
• Web Designer

  One answer, on 6/13/2021

  RE: I am unable to publish to outside host.
  @Steve-Graves Hi Depending on the template you started from after you have published to your host, you see a folder/file structure like this: or this The index_htm_files folder contains all the support files, images, etc. Can you see these
• Music Maker

  3 answers, most recent on 8/4/2021

  RE: No Sound
  @Steven-Vandross You need to set up the audio driver in the program settings. If you select Direct Sound you should get playback for audio loops. If you also want playback for MIDI loops and live recording you need to select ASIO. Music Maker offers
• ACID

  21 answers, most recent on 6/8/2021

  RE: Acid Pro: Record soft synth in realtime?
  @Rednroll Noted. I will send Magix an email about this. Someone I know said that Ableton Live can already do the things I mention. I will look further into Reaper as well. I guess each DAW has their own approach at music making and I just need to
• Movie Studio

  11 answers, most recent on 6/4/2021

  RE: Program crashes and new blue plug-in not working properly.
  @johnebaker @Scenestealer Thank you. It's all a bit gibberish for me at the moment. Are you or anyone able to provide live support for replacing the NVDIA drivers with Movie Studio drivers. I've also not heard back from the company itself (MAGIX)
• SOUND FORGE

  5 answers, most recent on 6/2/2021

  RE: Trying to order physical version (cd/dvd)
  Thanks but the purchase info said both download or physical media available with a $5.00 shipping charge on the DVD. The backup DVD is $15 more. I don't need a backup if I have the disc. I live in the USA. I'll contact service. Thanks again.  
• SOUND FORGE

  5 answers, most recent on 6/2/2021

  RE: Trying to order physical version (cd/dvd)
  @Boscoe Is there no option to add a backup DVD to your order below the green continue button? If not, then I think you are living in a country where no DVD delivery is included or possible. You can try and contact sales support at
• SOUND FORGE

  3 answers, most recent on 6/1/2021

  Soundforge Pro 15.0 can't find my Relab Plugin (LX480)
  The plug in is registered and lives in Program files 86, VST plug ins. I have directed the VST plugin preferences to look in that folder, but sound forge does not "discover" the program, even after I refresh. A second problem is that all of my IK
• Other products

  16 answers, most recent on 6/22/2022

  Sending emails with Magix email account
  It seems Microsoft are playing silly with emails to ‘Outlook’ accounts yet again.  We are receiving the same error messages, as below, to mail sent to all Hotmail accounts. It also seems raising a technical support ticket on Magix website is not
• Movie Studio

  One answer, on 5/24/2021

  How to get in touch with a live person?
  I am trying to set up an account, with the church I work for, so we can submit our tax status paper work. I personally have used Magix for years, love the platform and we want to buy a few packages going forward. Right now, we just want an editing