• Video Pro X

  22 answers, most recent on 8/25/2022

  RE: Crackling sound (only in Video Pro X)
  @Matt-Braun Hi Matt. @johnebaker sent me one of his :XAVC files so I could try it out for comparative performance between his system and mine. (My system being less powerful and older than his own). I did not have any problems playing his file which
• Movie Studio

  7 answers, most recent on 8/12/2022

  RE: Which upgrade for Magix Movie Edit Pro Plus (2022)
  @johnebaker Hi John. It was a bit of a rhetorical question from me. Sorry. As far as I understand it that will only happen if used with a 12th generation Intel CPU and running Windows 11. At least that is how it reads on the Intel site. Intel has
• ACID

  9 answers, most recent on 11/26/2022

  RE: Acid Pro 11 Programme Update Error
  I hope this comment does not come across as crass or dismissive. I read all the comments and there are very useful suggestions and points made. The advice to turn off Controlled Folder Access did work and allowed the installation of the last
• Video Pro X

  3 answers, most recent on 7/30/2022

  RE: Graphics card inquiry
  @AAProds Hi Al. That may be difficult to find as @1940 is running a motherboard using DDR3 ram. That means the motherboard architecture is different as well. That alone could account for a 15% or more performance difference (downwards). It should
• Video Pro X

  41 answers, most recent on 10/16/2022

  RE: Cant edit 4k videos nicely.
  @macarrao Hi. Thanks for the file data. As partially suspected, it is an HEVC file with variable frame rate. These can cause problems because Video editors at present deal with constant frame rate exporting... Thanks you Ray,i learn, will do it in
• Video Pro X

  41 answers, most recent on 10/16/2022

  RE: Cant edit 4k videos nicely.
  @macarrao Hi, and welcome to the user to user forums. You have a quite powerful system. There could be several reasons of which the ... Hello Ray, Thanks you for your reply and sorry for delay. And sorry i forgot to say i have 3 nvme of 2tb, the
• Movie Studio

  81 answers, most recent on 7/25/2022

  RE: HEVC/H.265 files in Magix 2021 premium
  Yes, the performance charts show activity when I render the clips, even the video when exported has a size.
• Video Pro X

  41 answers, most recent on 10/16/2022

  RE: Cant edit 4k videos nicely.
  @AAProds Gents, think about it. A proxy file is a rendered MXV. It cannot be VFR. Why not? From the Help manual If performance deteriorates and playback becomes shaky due to hardware limitations, hi-res source material or very complex projects, it
• Movie Studio

  81 answers, most recent on 7/25/2022

  RE: HEVC/H.265 files in Magix 2021 premium
  @AAProds Hi Alwyn Drifting OT slightly . . . . ATI Radeon HD 4770 (512mb) which is ignored by MEP . . . . Do the Task Manager, Performance charts show any activity when you try rendering a mix of images and video? John EB
• Movie Studio

  7 answers, most recent on 7/10/2022

  RE: magix movie edit pro 2022 premium codecs?
  @Ted-Wilby Hi . . . . This Z840 can do PCIe 3 x 16 . . . .  GeForce RTX 2060 12GB GDDR6 . . . . My apologies I missed you had the dual Xeon processor motherboard version. I have the RTX 2060 both in my PC and laptop and am pleased with its
• Movie Studio

  81 answers, most recent on 7/25/2022

  RE: HEVC/H.265 files in Magix 2021 premium
  @Scenestealer . . . . ATI Radeon HD 4770 (512mb) which is ignored by MEP . . . . Why do you say that? It shows up in your screenshot of MEP program settings. The question is more "why doesn't it show up in the performance graphs in task
• Movie Studio

  81 answers, most recent on 7/25/2022

  RE: HEVC/H.265 files in Magix 2021 premium
  @johnebaker Do the Task Manager, Performance charts show any activity when you try rendering a mix of images and video? Flat line... no line! It does serve a purpose because my monitor is connected to it (no motherboard graphics at all).
• Movie Studio

  6 answers, most recent on 7/17/2022

  RE: Recent Reformat - Necessary to Deactivate Before Reinstalling Again?
  @Kelly-Hill Hi The licencing of Movie Studio (MMS) allows for installation on 2 computers, if you have not used the second activation slot, you can install on the new computer while keeping the installation on the old computer - recommended until
• Music Maker

  15 answers, most recent on 7/4/2022

  RE: Need to move loops, sound banks, VSTs, etc. to a new computer.
  @Daniel-Hoff What performance load does the graphics card in the Taskmanager show? This sounds like a graphics driver problem. Are your drivers up to date?
• Audio Cleaning Lab

  One answer, on 7/31/2022

  Degenerative Performance Over Time
  I recently upgrade to ACL 4, and frankly have had nothing but problems with it. It frequently crashes and the bottom half of the screen blurs and locks me out of use. I get error writing noise file prompts and now I get a blank error message with an
• Movie Studio

  11 answers, most recent on 8/4/2022

  RE: an error occurred during proxy rendering
  @johnebaker Jacek is using Proxys. There should be no problem with his machine (which is similar to mine, performance-wise). It is arguably not "below the minimum spec" for MEP 2021 (there never has been "below this, MEP will not run"). Below
• Video Pro X

  23 answers, most recent on 8/2/2022

  RE: Nvidea 3080ti
  @alsena Hi. It is possible with all nvidia cards to both monitor their performance and if need be throttle them back a bit to keep thermals under control. I never let any of my components get above 75℃. Most of the time even in this hotter weather
• Audio Cleaning Lab

  One answer, on 7/12/2022

  Unable to import from CD on CD drive.
  I have been using this facility for years but the function has recently ceased to operate. It will import a very short cd under 5mins length but anything longer the CD just clicks in the CD drive. I have tried this with a number of CDs and the same
• Video Pro X

  11 answers, most recent on 8/24/2022

  RE: ProX 14 Crashes when Loading Any File Except AVI
  @Rowland-Fogarty Hi Crashes with the error you are receiving are usually caused by the GPU drivers. Are the WX 2100 drivers up to date? If not update them to the latest version. In the Program settings, Device options tab you may need to change the
• Video Pro X

  23 answers, most recent on 8/2/2022

  RE: Nvidea 3080ti
  @alsena Hi. Graphics card compatibility is down to the cards supporting the graphics drivers needed for the program to run rather than whether a graphics card has any component issues or card slot issues. Sometimes a new set of graphics cards can be
• Video Pro X

  9 answers, most recent on 8/1/2022

  RE: the best video editing software
  @Rafal-Banaszek Hi. You are running the same CPU as myself. If I could afford this card I would buy one but I would be aware I would be buying it for future proofing more than expected performance is it will run on a PCI-Express 4.0 x16 interface.
• MAGIX

  12 answers, most recent on 11/2/2022

  Movie Studio 2023 - Videos That Will Be Remembered
  Dear community, Movie Studio is under continuous development and, based on extensive feedback, will be even better optimized to meet your needs. Today we are proud to present you Movie Studio 2023! With the help of brand new, innovative features you
• SOUND FORGE

  23 answers, most recent on 7/19/2022

  RE: SOLVED - Error 0x80131700. Failed to Bind to MS Common Language Runtime Scripting Host failed to start up.
  This was an error I also got when trying to install and open my Movie Studio 8 on a Windows 10 install. Your post was the beginning of the fix but hit a wall when the .NET update failed with error 0x800736b3. I followed the steps at this link
• Samplitude

  3 answers, most recent on 7/1/2022

  RE: Samplitude X6/X7 - Low rendering performance
  @XSOM Can you show the single core performance by right clicking on the diagram? I would guess that audio processing cannot be easily split into different threads and the rendering takes place on a single core.