• Samplitude

  8 answers, most recent on 3/2/2024

  RE: No master audio signal in midi track only project
  @Luca8650 If the Juno plays the MIDI notes it is connected fine. But Samplitude needs the audio signal back from the Juno as well. Can you show us a screenshot of your Audio Setup settings in Samplitude, too? Usually, you should have selected an
• Samplitude

  6 answers, most recent on 5/6/2023

  Change pitch from object
  Hello I would like to know if there is any way to raise or lower the pitch of the MIDI notes of an object without having to enter the Midi Editor, select the notes, etc. Thank you.
• Music Maker

  5 answers, most recent on 11/27/2023

  RE: Music Maker 2024 Premium crashing on PC
  @Crayyy What are your audio driver settings? I recommend the following in case you don't have an external USB audio interface: Open the Music Maker program settings and go to the Audio/MIDI tab. Select the Music Maker ASIO driver. Click on the
• Music Maker

  One answer, on 11/22/2023

  RE: Live Pads goes to choppy sound when finish the first 12 or 16 full qrt
  @juanmantovar This sounds like your processor gets overloaded. In case you don't have an external USB audio interface I recommend the following settings: Open the Music Maker program settings and go to the Audio/MIDI tab. Select the Music Maker ASIO
• Music Maker

  8 answers, most recent on 7/13/2023

  RE: MIDI duplication of track 'stutters'
  @SP. It seems that every time I mute the other MIDI tracks, it does work again.. Also, you can't bypass it by downloading it and putting it back in, will still 'stutter'
• Samplitude

  4 answers, most recent on 1/14/2024

  Fresh install of Samplitude still pulling up old settings
  I'm trying to fix a problem I am having and I have deleted every instance or thing that says magix samplitude, etc. However when I re-install Samplitude pro x3 and open it, all of my previous files are still there the same. it still has what audio
• SOUND FORGE

  164 answers, most recent on 9/27/2023

  RE: Feedback on SOUND FORGE Pro 16
  I have Soundforge pro suite 16. The specs say it has midi controller. I would like to find a desktop controller for the program. A} Does anyone make a controller that will work on it? B} Does Midi Controller in the specs refer to using a desktop
• Music Maker

  3 answers, most recent on 4/28/2023

  RE: No sound from keyboard
  @JonHst If you have selected Music Maker ASIO or ASIO4ALL in the program settings under the Audio/MIDI tab you should be able to hear sound while playing the keyboard. Make also sure that MIDI REC is enabled in the track header.
• ACID

  2 answers, most recent on 11/13/2023

  RE: MIDI parts export to .wav into the wrong key
  Hi I have noticed a similar issue to your self when using melodyne to extract midi from audio , when I import the midi it is always 2 or 3 semitones out what I have to do is visually check the notes in melodyne and move the midi to correspond I have
• Music Maker

  2 answers, most recent on 11/28/2023

  RE: selling beats
  @Ikonik The rapper/singer is not relevant to what you can do with Music Maker with respect to selling beats. If you are using any of the Soundpool loops, and do not have a Commercial licence for every Soundpool a loop(s) has been used from, then the
• Music Maker

  8 answers, most recent on 7/13/2023

  RE: MIDI duplication of track 'stutters'
  @SP. This problem also occurs when in a single track. Might have something to do with how many MIDI tracks you have? Because when having one it's fine, but coping or making more it will stutter.
• Music Maker

  21 answers, most recent on 7/19/2024

  RE: Hearing sound where there is none (no sample)
  All night at work I kept thinking on what I am missing. I got home (2:30 AM - I work afternoons ) and did exactly what you said to do. Still I had no sound or was able to record Audio. So all was correct with what you told me. But there was
• Samplitude

  15 answers, most recent on 12/18/2023

  RE: adding the plug keyboard on the program onto track
  Thank you. Have the program up and flicking back and forth trying to make sense with your instructions. Thank you so much for helping. I can play my track and have the choir on the on screen key-board playing over the track but there is no record
• Samplitude

  12 answers, most recent on 12/14/2024

  New update is available for Samplitude Pro X8 and Pro X8 Suite
  A new update is available for Samplitude Pro X8 and Pro X8 Suite, which can be installed via the auto-update directly inside the program or manually from the following links: IMPORTANT: Requires Windows 10 or 11. Samplitude Pro X8 19.2.0.24218
• Music Maker

  19 answers, most recent on 5/4/2023

  RE: DN-e1 Cuts out in every bar
  @Chris-Wakefield The processing of audio object ends at the edge of the object. If you want to repeat it, enable object loop mode instead of copying and then you can drag it over your compete project. I think the problems stems from the way MIDI is
• Music Maker

  20 answers, most recent on 8/11/2023

  RE: questions about working with Music Maker.
  @Former user Yeah, like I described earlier you need to split the notes onto multiple tracks. Copy the MIDI object onto a second track, load the same instrument, and delete all the notes you don't want to affect with the controller curve. Make also
• Music Maker

  14 answers, most recent on 5/2/2023

  RE: Not very savvy
  @graham-h8180 Can you tell us what you want to achieve? You need to open the program settings under the File > Settings menu. Click on the Audio/MIDI tab. There select your Keyboard as a MIDI input and the Microsoft GS Wavetable Synth as an MIDI
• Music Maker

  2 answers, most recent on 5/13/2024

  I bought version MUSIC MAKER PREMUIM EDITION 2021
  I am supposed to have a 2 device license and I tried to install it on my laptop and it has killed both my PC copy and the one I tried to install on my laptop for mobile work. MUSIC MAKER PREMUIM EDITION 2021 and it won't let me create any activation
• Music Maker

  6 answers, most recent on 4/2/2023

  MIDI Keboard is not recognized after update to WIN11
  Does anyone have a solution for this issue. Are there specific USB MIDI drivers for WIN 11 ?
• Music Maker

  5 answers, most recent on 12/7/2023

  RE: Old MIDI map? one click
  @Will_Bcn In the top left corner of the MIDI editor you can switch to the drum map mode, in case this is what you want. Not really Cause I can see the new map editor. But before it was easier to use in my opinion. You just add to click the cases
• ACID

  4 answers, most recent on 8/11/2023

  Akai Pro MPK mini and Acid Pro connect!
  Hi! My Acid Pro 11 will not recognize my Akai mpk mini as a midi controller! I'm trying to use it along the Sylenth vst! Any help? I've tried everything in acid to recognize it! Thanks! Ron!
• Music Maker

  8 answers, most recent on 1/9/2024

  RE: hjælp
  @Muradi First try to restart your computer. Please select the Restart option and not the Shut down option. If this doesn't help please check the audio driver settings. Go to File > Settings > Program Settings > Audio/MIDI and select an ASIO
• Music Maker

  8 answers, most recent on 7/13/2023

  RE: MIDI duplication of track 'stutters'
  @SP. Sadly to say that it hasn't worked, have tried every sample. Have also tried every other setting in the Adio/MIDI tab.. I'll also try in the evening to see if it works on a stronger computer..
• Music Maker

  11 answers, most recent on 1/30/2024

  RE: Changing frequencies of music (solfeggios)
  @SPow Hi . . . . I was thinking about elongating electronic keyboard/drones of some kind . . . . Do you mean something like this quick and dirty example: This is the demo melody for the Space Pad (Modwheel) VSTi with added low pass filtering,