• Movie Studio

  17 answers, most recent on 4/27/2021

  RE: Main Concept MPEG-4 Codec
  @Beardeboss Hi My opinion differs to @johnebaker and @emmrecs as I have used the MC encoder for many years as it used to be the default encoder in MEP and have had good results. The zero byte bug only occurs with HWA encoding to .MP4 and not with
• Movie Studio

  8 answers, most recent on 4/11/2021

  RE: "Cannot Open Waveform Device" Message
  Had the same problem and found a less professional but effective measure. This error only occurred at a particular film processed some years ago on an older version of PRO X. As I always split movies into sections I loaded a section from a movie not
• Movie Studio

  34 answers, most recent on 4/16/2021

  RE: RGB Colour Identification in Raw Clip
  Hi Ray Here's the problem. This artefact goes all the way through the film, changing its shape and definition a little as it goes, but basically similar throughout. The sky does indeed vary from clip to clip within the film, and most of the clips
• Movie Studio

  17 answers, most recent on 4/27/2021

  RE: Main Concept MPEG-4 Codec
  @Beardeboss Hi My opinion differs to @johnebaker and @emmrecs as I have used the MC encoder for many years as it used to be the default encoder in MEP and have had good results. The zero byte bug only occurs with HWA encoding to .MP4 and not with
• Video Easy

  No answers, created on 4/9/2021

  Text Video Easy 6.
  When I try to insert "No animation" into a Film sequence, I always get "From left to right" wich is a problem.
• Movie Studio

  12 answers, most recent on 5/28/2021

  RE: Magix movie edit pro premium 2020
  Thanks Ray. I can't answer most of your queries and I'll wait for my friend to come over soon and find the answers you want. All I can say is that I use a Panasonic HD cam corder model HC-X920 which uses an SD card and supplies AVCHD video shots. I
• Movie Studio

  5 answers, most recent on 4/2/2021

  RE: video program vs movie program
  @logan-d Hi Logan and welcome to the Magix user to user forums. 'Video' and 'Movie' are interchangeable terms. Video is more common a term for Europeans and Movie is more common for Americans. The origin of Movie comes from 'Going to the Movies' as
• Rescue Your Videotapes!

  No answers, created on 4/2/2021

  No new project appears after video transfer
  Most grateful any advice: I begin by 'transferring video to computer' and can see the playback video/audio on my computer. Then I 'end transfer', then 'Start Video Editing.' But nothing appears to have transferred. There is no new film icon that
• Video Pro X

  7 answers, most recent on 4/3/2021

  STUTTERING
  WINDOWS 10 HOMEPROCESSOR: INTEL CORE i7RAM 16GB64-BITNVIDIA GeFORCE GTX 1050MAGIX 15.0.4.176 (UDP3) Hello all. Footage (both live action and animation) is playing choppily early on within the film I am putting together. This has just started tonight
• Photostory

  22 answers, most recent on 4/6/2021

  RE: Encoding Failed
  @Robert-Wells Hi There is some confusion here. . . . .  I followed your instructions and it made the Magix MXV file . . . . it went through without any problem and started to play without any action by me . . . . Do you mean the MXV file opened in
• Video Pro X

  One answer, on 3/30/2021

  [Closed] Corrupted mp4
  So I've had this issue where when i extract any type of video from Sony Vegas Pro 18 the video file I get, is corrupted or for some reason wont play in either VLC, Windows Media Player or Film&TV. Also coming many different error codes, all when
• Movie Studio

  150 answers, most recent on 4/12/2021

  RE: Graphics Card
  @Steve-McClelland Hi . . . . Therefore when filming at the 60fps and simply slowing to 30fps maybe i don’t need ti tick that box?? . . . . If you are exporting at 30 fps then in theory there is no need to check the Interpolation option. John EB
• Movie Studio

  150 answers, most recent on 4/12/2021

  RE: Graphics Card
  Just thinking now about “ticking interpolation box” Someone mentioned that this fills in images when reducing the speed. However, i can understand this if original footage was filmed at 24 or 25fps as otherwise fps would not be enough to be smooth.
• Movie Studio

  150 answers, most recent on 4/12/2021

  RE: Graphics Card
  @Steve-McClelland Hi Steve. I understand the theory of using twice the shutter speed to frame rate rule to produce a more fluid natural movement during video playback which was really to help film and TV production frame rates of 24 and 25fps and
• Movie Studio

  150 answers, most recent on 4/12/2021

  RE: Graphics Card
  @johnebaker @Steve-McClelland Hi Steve. I'm still not quite sure what is causing some of the blocky looking parts of some of your tree branch areas and water surfaces. I looked at one of my backup discs for an old project I did when I first got my
• Movie Studio

  150 answers, most recent on 4/12/2021

  RE: Graphics Card
  Final export was jittery. I can understand the one you posted as was filmed 25fps so slowing down is not good because as soon as you go below 24fps then not possible to be smooth, however i filmed in 60fps and slowed 50% so should have been ok at
• Movie Studio

  150 answers, most recent on 4/12/2021

  RE: Graphics Card
  Rest assured all you guys assistance is greatly appreciated, no doubt. So, after some playing around with current 4k footage and exporting 1920x 1080, some of the clips just would not come out as good as hoped. Sooo...Went and filmed certain clips
• SOUND FORGE

  One answer, on 3/26/2021

  Sound Design workflow on Sound Forge Pro?
  Anyone do sound design and video audio post production on Sound Forge Pro? It would be nice to get some insights from pro's who use it. There are videos and articles of audio engineers who use SF for music production work, but am more interested in
• Movie Studio

  150 answers, most recent on 4/12/2021

  RE: Graphics Card
  Thats great information. Thanks very much for taking the time to respond with all that information. I have been in touch with custom build pc shop to buy a new tower and they have said that they don't understand why Magix are pushing the HD630
• Movie Studio

  150 answers, most recent on 4/12/2021

  RE: Graphics Card
  @Steve-McClelland Hi, just read everything 😂 I had a similar prob, as a novice all the above mentioned can be a bit overwhelming, a couple of yrs ago i upgraded to an i7 with 16gb RAM, i quickly upgraded that to 32gb RAM but not because i needed to
• Movie Studio

  3 answers, most recent on 3/23/2021

  RE: magix pc check and tuning is giving me error 14.
  @Barbara-Senior I'm not entirely sure what you mean no obvious lines for editing my film clips but I'm going to assume you mean you cannot see the "tracks" into which you place the various video or audio or image etc. objects. The Timeline work
• Movie Studio

  3 answers, most recent on 3/23/2021

  RE: magix pc check and tuning is giving me error 14.
  Thank you Jeff. I've just changed from Windows 7 to Windows 10 so am finding my way around both the new Magix programme and the new way of working with Windows! I've noticed that on my new editing programme that there are no obvious lines for
• Movie Studio

  150 answers, most recent on 4/12/2021

  RE: Graphics Card
  Hi all, so cant find post on here regarding matching bit rate to camera, but some one did and got me thinking. Also Ray mentioned I could up a bit. Soooo 122 Megabytes (MB)=124,928 KiloBytes (KB) 122 is my Mavic Air 2 camera, so set 124928 into MEP
• Movie Studio

  150 answers, most recent on 4/12/2021

  RE: Graphics Card
  Well this export did not come out too well, think will stick too higher bit rate settings and deal with file size. So one last thing, for my set up pc etc... if i film in 1080 60fps then all should be fine and no issues??