• Video Pro X

  7 answers, most recent on 1/28/2020

  RE: Auto save function.
  @johnebakerHi John.I think I have it sorted now.Not sure I understand why it needs to create 10 bak files to keep overwriting them from the 1st one.One file would be sufficient and keep overwriting that one and in the event of a crash, you can then
• Video Pro X

  7 answers, most recent on 1/28/2020

  RE: Auto save function.
  @johnebakerThanks John.I've tested what you say and I can load a BAK file on a new test project but when I make a change to an existing project and wait for auto save, it creates the BAK file ok but when I close the project and choose not to save as
• Movie Studio

  6 answers, most recent on 12/16/2019

  RE: Frame Rate help
  Okay, my misread. In any event, it seems to me that sometimes MEP doesn't get the frame rate right either. I will grab a screen shot next time I notice it.
• Movie Studio

  35 answers, most recent on 12/12/2019

  RE: Possible Bug During Save Project
  @CubeAce Hi Ray . . . . I can't believe your room is so large you actually have echo . . . . Does not have to be large to get echo, it is actually quite small, however there is no sound absorption apart from the carpet, hard walls, ceiling and
• Movie Studio

  35 answers, most recent on 12/12/2019

  RE: Possible Bug During Save Project
  @browj2 Hi John. With the amount of security at these events I've never seen even a small 'incident'. Very family friendly, these events. 😂. That sounds wonderful. You must have great memories from your childhood and that book does look early. It's
• SOUND FORGE

  22 answers, most recent on 4/18/2022

  RE: [Closed] Bad Crumb???
  Here was the response I got and no, I bought just a couple weeks prior and if I wanted a different program I would have bought it. To their credit they did refund me. I miss Sony. Unreal. "Thank you for writing us.  Unfortunately, your purchase of
• Movie Studio

  50 answers, most recent on 4/24/2020

  RE: Is my result a typical benchmark? (UHD 630 HW encode)
  Thanks, John. I have been trolling the forums off and of for a while and saw most of the above. While I wait for a custom power connector for my (unbeknownst to me, proprietary Dell P/S and mobo): Hmmm ... I remember now that I would have had to
• Movie Studio

  8 answers, most recent on 11/29/2019

  RE: Ethical or legal dilemas of use of MEP with T&Cs.
  @browj2 Hi John. Don't worry about me and sound pools. I've spent years collecting sound effects with portable (and not so portable) recorders. Starting with portable open reel machines, then Mini Disc and digital recorders. I've been on beaches at
• Movie Studio

  8 answers, most recent on 11/29/2019

  RE: Ethical or legal dilemas of use of MEP with T&Cs.
  Thank you John. So the first hurdle (for the want of a better term) is the word 'commercial' which would mean no moneymaking from the finished video or forward selling. No income from a YouTube video or similar for example if containing anything you
• Movie Studio

  8 answers, most recent on 11/29/2019

  Ethical or legal dilemas of use of MEP with T&Cs.
  My query concerns the terms and conditions of the End User License Agreement. In particular these sections. 5.2 Contents a) In principle, the Contents - with the exception of Live Sets - may only be used for non-commercial purposes. This also
• Movie Studio

  31 answers, most recent on 11/24/2019

  RE: Can't Move Objects freely - they keep snapping to points
  @Skyline_UK Hi John. Ever since I worked in the film and recording studio industries some years ago I have found the subject of how we see and hear fascinating. The idea of synchronizing audio to video is a complex one and one with little benefit to
• Movie Studio

  30 answers, most recent on 11/30/2019

  RE: No hardware encoding with Intel HD 530
  @Scenestealer Hi Peter. There has never been a way for me to have that box blank Peter. It was active the way you see it when I installed MEP and dropping down the box doesn't give me an alternative. The activation box is not ticked though. This
• Movie Studio

  31 answers, most recent on 11/24/2019

  RE: Can't Move Objects freely - they keep snapping to points
  @Skyline_UK I don't know if a frame of audio measured in time is imperceptible or not as that is down to individual ability but assuming you record at the slowest frame rate of 24fps it equates roughly to standing about 42 feet away from the sound
• ACID

  48 answers, most recent on 2/12/2020

  RE: ACID Pro 8/9/Next/MusicStudio - updated public beta Nov 12, 2019
  One problem with loop edits in audio project. Audio file is are fully mp3 and beatmapped too. Acid Pro 9 12 November beta The last published official AP 9.0.3.26 supports MP3 in 64 Bit again, but its MP3 decoding is not 100% compatible to current
• SOUND FORGE

  7 answers, most recent on 11/13/2019

  RE: Color issues with process windows
  Hi and thanks for the suggestion. Already tried that as well. Most of the settings seem to be for background color and events and such. Not for the elements of the windows themselves. I even tried to work with the settings for the PC. Nothing fixes
• Web Designer

  7 answers, most recent on 11/28/2019

  Slow upload; upoad everything changes only box checked; slow website
  Thanks, I have noticed similar problems with Web Designer Premium and hope to get some insight here. Designer loads all content each time even though "fast publish" box is checked. The website itself loads from the web painstakingly slow as well. I
• ACID

  6 answers, most recent on 4/1/2020

  RE: ACID Pro Next and Melodyne
  Ok, so this doesn't solve the problem at all. Now what I do is to remove Melodyne from all events, then edit back (just reopening Meylodyne) only the tracks that I modified before saving, in this way I get back all changes.
• ACID

  15 answers, most recent on 11/13/2019

  RE: Acid pro 9
  Would it work if i manually type in the bpm without beat mapping? I am afraid no. Typically there is an static offset about 30 ms, maybe you can adjust that manually by moving the event or modifying the event start offset. We are still researching
• ACID

  6 answers, most recent on 4/1/2020

  ACID Pro Next and Melodyne
  Hi, maybe I'm wrong, but the integration with Melodyne and the ARA2 standard are still not perfect.I tried to do some editing with ACID Pro Next and Melodyne, first of all, it seems that this is not available for the 32-bit version of ACID, but also
• SOUND FORGE

  One answer, on 10/12/2019

  RE: Parallel track editing
  Not sure about AS (Audio Studio) but a multi-track file could be created, and the desired files dragged to tracks 1-2 / 3-4. Using the event/splice tool would make it easy moving the file / events around on the timeline.
• ACID

  13 answers, most recent on 2/24/2020

  RE: Acid update/ 10 new feature suggestions/ requests
  Agreed, Cloud Content, more snap options for sure are needed, and would save our brain power(Snap to Events and Cursor for sure. And grid relative for me anyway)
• ACID

  13 answers, most recent on 2/24/2020

  RE: Acid update/ 10 new feature suggestions/ requests
  Snap Suggestions Which Offer Users Choice and Flexibility   Currently in Acid Pro 9, there are two options under "Snapping" 1) Enable and 2) Grid Only. I would like to turn off Snapping to the Grid, but keep "events"/"clips"/"media items" snapping
• ACID

  13 answers, most recent on 2/24/2020

  Acid update/ 10 new feature suggestions/ requests
  Just thought id start this... please add to itI have loads more written, buthere are some Id likePlease have mercy on me if some of these already exist :)   1. Quantise midi notes by selecting them with the multipul selection tool/ and keyboard
• ACID

  6 answers, most recent on 10/11/2019

  RE: Acid Pro 9.0.1 - Tracks constantly moving around slightly
  In Acid Pro 9 (9.0.3 build 26)(this is 32-bit Acid, in Windows 7 Pro 64-bit, with all updates. But I suspect this bug has existed in many versions of Acid) The waveform inside of "clips"/"events"/"media items" moves slightly when the edges are