• Movie Studio

  19 answers, most recent on 6/24/2024

  RE: Saving videos question (Saving YouTube vids to PC for later)
  @Eric-Elliott Ok, Thank you for the tip about not using MS to load to YT. I wanted to load direct thru my browser anyway. Good 👍 As for YT video options, I don't trust it. I'd rather wait and be good and ready to load it public. I would first load
• Movie Studio

  15 answers, most recent on 1/6/2023

  RE: POOR MPG4 QUALITY
  @hawaiiboy65 If you give Youtube at least 1440P ie 2560x1440 (16:9) or 1920x1440 (4:3), then you'll invoke the YT VP9 video codec, which is better than H264. And make sure you choose "Best" in the Advanced export settings. Why Magix thought it
• Movie Studio

  50 answers, most recent on 10/20/2023

  RE: Help selecting a new PC
  Well thanks to all your feedback I have just modified my "trial" dog walk video. My new Mic arrived today and that works well...so one problem solved!! Its a HyperX Solocast. Based on feedback here I have set my project at 1080/50fps and rendered at
• Video Pro X

  31 answers, most recent on 12/13/2022

  RE: PNG loss quality when I export video in MP4
  @AAProds Hi Al. HD to me means 1920 x 1080. 60Hz. Nothing special by today's standards. HDMI inputs 12volt. No audio. If I want to check anything resolution wise I've uploaded to YouTube I can use the lounge 42" Sony TV. Ray.
• Movie Studio

  6 answers, most recent on 4/14/2023

  RE: I have Movie Studio 2023 Plat . ....Backgrounds
  @Bill-the-repair-guy Hi, Assuming that you downloaded and installed the Extra Content, Backgrounds are under Templates tab, Image Objects, Backgrounds. You can always find other backgrounds on the internet or make your own. There are other ways.
• Movie Studio

  31 answers, most recent on 7/26/2023

  RE: Capture-Transfer HD Video Into MEP2016 Plus
  Hey There Gid! Yes (thank you) I got the camera to use 29.97 (unless I'm missing something), the end result in REC MODE, choosing 'iFrame-MP4', also reduced the resolution to 960X540 When I went back to REC MODE and chose 'MP4-50MM' it returned to
• Video Pro X

  165 answers, most recent on 4/10/2025

  RE: [Closed] Website Observation
  @Reyfox Hi Tony, A couple of things: VPX was priced much lower than everything else out there in the prosumer/pro market. The website had videos showing what it could do. Now, nothing on the website to attract a new audience. As I mentioned, on the
• Video Pro X

  46 answers, most recent on 12/8/2022

  RE: HEVC compression artifacts
  I didn't think of that. If it is a bug specific to the AMD hardware acceleration: I tried disabling the hardware acceleration, but it is slooowww. Not even practical to test. For now, the best solution seems to be to simply use MP4/AVC exports
• Video Pro X

  46 answers, most recent on 12/8/2022

  RE: HEVC compression artifacts
  @nicolesharp100 Hi Nicole. I haven't altered the colour of the file, just the brightness curves and saturation. John's image may be showing rings of graduation because I have never seen him tick the 'Use dithering for output' on his exports. Look at
• Movie Studio

  31 answers, most recent on 6/27/2024

  RE: Where did my audio go?
  @CubeAce Hi, I've had my YT channel since 2012, I used to upload anything I like, I too didn't really care about subs etc, but I could monetise my videos even tho I only had 500 subs. Adsense is YT's money manager type thing, earnings from YT go
• Music Maker

  5 answers, most recent on 3/8/2023

  RE: Waves Plugins Not Loading on Song Recall
  I have both, but they all load and function properly, simply will not recall on reload. I even changed the security settings on all of them to no avail. I thought at first it was that I had several revisions of Waves (11, 12, 14) but when I checked
• Video Pro X

  40 answers, most recent on 6/7/2023

  RE: Sony FX3 files compatibility with Video Pro X
  @CubeAce Hi Ray . . . . . Pulse Code Modulation. L is for multichannel. . . . . Not quite - the L is for Linear, referring to the Quantization method, for more info on the difference see here. For iPCM, I can find little explanation of the exactly
• Movie Studio

  13 answers, most recent on 3/31/2023

  RE: Lack of Transitions
  @Mark-Russell Hi, Watch this to see what you'll get when you buy the program. John CB
• Music Maker

  7 answers, most recent on 12/1/2022

  RE: Owns 2021 premium and purchased 2023 premium - can I still use both?
  @LES-DA Hi, Shouldn't Magix tell users that we don't need to purchase the upgrade? I don't see why. Music Maker is free. See this: John CB
• Movie Studio

  13 answers, most recent on 3/31/2023

  RE: Lack of Transitions
  Hi everyone, Thanks for the help. I did install the extras as browj2 advised - I now have the transitions I was missing. I will keep Edit Pro 2021 for the use of Mercalli 2.0. I am still missing colour correction in Edit Pro 2021, but that is not a
• Music Maker

  5 answers, most recent on 12/14/2022

  RE: Trying to reinstall Music Studio 2016 on a new desk top PC.
  There's a video on YouTube - There's a lot Of Specific Steps You need to do .. It's Not Just a Simple download And install -- You need to Go through Your Preferences, and settings - and all kind of other bumps in the road... I don't know why Magix
• Movie Studio

  26 answers, most recent on 10/27/2022

  RE: Trying to work out how to do motion tracking (blur out an object)
  @OldNick1 Hi Nick, Here are two tutorials that I did showing two different methods for blurring - motion tracking and manually - amongst other things. For stabilizing, I presume that you don't have Mercalli. John CB
• Movie Studio

  5 answers, most recent on 12/16/2022

  Options cut off and insert parts of videos like it shown in the video
  Does Movie Studio has options cut off and insert parts of videos like it shown in the video (link below). I want to do something like it is in the video, cut off heads form videos and and use them to other videos.
• Video Pro X

  46 answers, most recent on 12/8/2022

  RE: HEVC compression artifacts
  @nicolesharp100 Hi . . . . we are using the same software and exporting the same file with the same settings and getting very different results, then it seems to be a driver or codec error, . . . Agreed - are the drivers for the Radeon RX 550 up to
• ACID

  20 answers, most recent on 12/6/2023

  RE: Good bye Magix Acid Pro 10
    Whats up everyone, So I switched to Cubase after using Acid pro 7,8,9,and 10 for many years. It was extremely stressful, discouraging, and frustrating dealing with all the issues mentioned in the comments. It is such a relief and great feeling
• Video Pro X

  8 answers, most recent on 10/21/2022

  RE: How get clips in a channel to line up next to each other automaticicly
  @Adam-Williams Hi, I presume that you are using Video Pro X. If you're using Vegas, your in the wrong forum. Channels? I presume that you mean tracks. Further to what @AAProds mentioned, watch these tutorials, particularly the third one. You should
• Music Maker

  12 answers, most recent on 1/14/2023

  RE: Proper sample rate for exporting as WAV?
  Hi SP I've spent the last 4 days working on a track. I can't export it to either WAV or MP3. Now, when I attempt, it just crashes. Regarding looping: Yes, I knew about the "hidden" bit, but it doesn't work. I'm having so many issues with this
• Movie Studio

  13 answers, most recent on 2/23/2023

  RE: Movie Studio 2023 Moving an object one frame at a time.
  @tyounis Hi, I presume that you have Platinum or Suite. There are a couple of ways to move an object. My preferred method is to use the Object Trimmer (Shift+N) or the Edit Trimmer and the controls in the rectangle in the image below: You can see
• Video Pro X

  46 answers, most recent on 12/8/2022

  RE: HEVC compression artifacts
  @nicolesharp100 Hi Nicole. I haven't altered the colour of the file, just the brightness curves and saturation. John's image may be showing rings of graduation because I have never seen him tick the 'Use dithering for output' on his exports. Look