• Other products

  One answer, on 2/28/2022

  [Closed] Finding Keyframe Animation
  I use Vegas Pro 19. I want to use the keyframe facility. But I cannot find the animate button(s) needed to begin this and said to be next to FX parameter control, where ever that is. Could someone very kindly guide me step by step so I can get
• Movie Studio

  13 answers, most recent on 8/21/2024

  Settings for export and editing
  Hello, I record videos in 2,7k 240fps or 4k 120fps. I want to export them as 2,7k 60fps or 4k 60fps.When I create a new Magix project, do I have to set so high quality or can I choose for example 1080 30fps? (Just for editing, to make computer run
• Movie Studio

  11 answers, most recent on 2/26/2022

  RE: MKV FILES
  Greetings @Chris-Chambers I'll begin by assuming you are using MEP 2022 Pro. MEP 2022 does edit MKVs. I use them often. I'm a little stumped though with "if so how?". I use them in the same way as any other file. They do tend to load a little slower
• Other products

  No answers, created on 2/24/2022

  line break tool not working. When tool is clicked red line backs up.
  When I click on the line break button in the top tool menu the red cursor line backs up to the beginning of the last word I typed. Clicking shift + enter was working previously, but for some reason it isn't now, and I can't type a second or third
• Web Designer

  One answer, on 2/25/2022

  Remove a Startup Notification
  Hello Everybody, Whenever I begin a new session with Xara Web Designer and load the first project I will receive a notification to "Renew the Update Service". I can either select a button to "Start the Update Service", or simply "X" out of that
• Music Maker

  6 answers, most recent on 2/23/2022

  RE: License is invalid
  @Shirley-Smith Hi The serial number for Music Maker begins with P3- followed by 5 sets of 5 numbers separated as shown below P3-11111-22222-33333-44444-55555 The whole serial number, as shown above, must be entered into the activation dialog. If the
• Movie Studio

  8 answers, most recent on 2/23/2022

  RE: [Closed] Importing MP4 video file - Error 0x1009: end of file reached
  This just happened to me today -- 1st time ever (with current version of VPX); so reviving an old thread. It's surely an unhelpful error message! In my case, my frame rate is constant. When I downloaded my video from Vimeo, for whatever reason it
• Movie Studio

  8 answers, most recent on 2/22/2022

  RE: Error burning DVD
  Hello, Many thanks for sharing all this information!!! I consider it as a speed course in solving video file mysteries ;-). To make a long story short: I got a DVD that works straight from MEP! These are my discoveries: The 32kHz soundtrack seems
• Movie Studio

  7 answers, most recent on 2/21/2022

  RE: Sound in sync in editor, not in produced file
  Greetings @Donald-Kimball and welcome to the forum. "Any tips?" you ask. There are many, most of which will have nothing to do with your problem. I have no doubt there is an easy answer to your syncing issue so to begin can I suggest you read this
• Movie Studio

  48 answers, most recent on 2/25/2022

  RE: No 4K Icon Thumbnails and poor playback.
  @hatfieldphoto Hi . . . . why does a 6 year old MEP play the 4k clips smoothly on my system (when the 2022 MEP cannot) . . . . MEP 2016 uses old technology and may be taking advantage of the of the HD4000 or GTX 650. In your case recording video at
• Movie Studio

  21 answers, most recent on 2/23/2022

  RE: Am I using MXV files incorrectly.
  @AAProds @Former user @johnebaker Thank you all for testing this for yourselves. The game ready driver does not seen to alleviate this problem and I'm sure Magix will be delighted with yet another new 'bug report' this late in the development of the
• Movie Studio

  25 answers, most recent on 3/31/2022

  video and audio sync
  I have a recording of a concert on Zoom which when I view it with Windows Media is nicely in sync. Harpist plucks a string, you hear the note at the same time. When I import the video into Magix Edit Pro though, and trim a bit off the beginning,
• Movie Studio

  13 answers, most recent on 2/19/2022

  RE: [Closed] Moviestudio Platinum 2022 does not work
  @Martin-Sotelano Hi . . . . standard HD video 1920 x 1080. Sources MP4 and MOV. . . . Thanks for the information. . . . . Intel(R) Core(TM) i7-4800MQ  . . . .   You should be able to improve the performance as follows: Ensure Hardware Acceleration
• Movie Studio

  21 answers, most recent on 2/23/2022

  RE: Am I using MXV files incorrectly.
  @AAProds @johnebaker @Former user Thank you for joining in Al. I can confirm your findings. Adding a short mp4 file to the beginning made no difference in MEP 2022. Now I am using the studio drivers. I will try the game ready drivers later. Can't
• Movie Studio

  21 answers, most recent on 2/23/2022

  RE: Am I using MXV files incorrectly.
  @johnebaker @Former user Hi John. I opened my project using VPX 11 and exported the whole project with no issues. EI using the one mxv file edited and re-ordered the chopped up file. Export took two minutes longer than the length of the edited
• Movie Studio

  9 answers, most recent on 2/17/2022

  Crashing on MP4 export
  Upon MP4 export, the product renders until about 99% complete, then shuts itself down. The resulting file is corrupt and will not play. Using Win 10 on a system that was working just fine with Magix 2016 a few days ago. I'm on an HP using nvidea
• Movie Studio

  22 answers, most recent on 2/13/2022

  RE: Portrait clip on top of portrait clip, Size/Position/Rotation is weird
  @Former user @AAProds @johnebaker Hi Gid. I am beginning to wonder if some of these changes in behaviour are not deliberate alterations from Magix to differentiate product lines and why some 'bugs' reported are not being fixed. Personally I have
• Movie Studio

  13 answers, most recent on 2/11/2022

  RE: Crashes for burning 23.976, Audio support, options not saved...
  @Former user Hi Gid. That is as good an explanation as you will probably get on that link Gid. If you consider that a 3dB increase is a doubling in volume (assuming power increase is a linear proportion to speaker cone movement) but a 10dB increase
• Video Pro X

  38 answers, most recent on 2/7/2022

  RE: proDAD Mercalli V5 SAL
  @Scenestealer Hi Peter. I'm beginning to think that that importing new clips with Interpolate Intermediate frames on import is deliberate so that Magix can make their claim on the website of "INFUSION Engine 3 Movie Edit Pro now has a brand-new
• Movie Studio

  13 answers, most recent on 2/6/2022

  RE: Blank spaces in my movie
  @Gregory-Richardson Yeah, it's your footage not the program, it's because the last frame isn't a full frame, you'll have to drag the end back to the last full frame then choose Close gaps or drag the event to close it, sorry unless someone knows an
• Video Pro X

  38 answers, most recent on 2/7/2022

  RE: proDAD Mercalli V5 SAL
  All the material is shaking sideways ... you can see it. Compare the result files. From the beginning on the grass and then the roof of the building was torn off. It shows. The top frame frames a different frame than the bottom one and the whole
• Movie Studio

  32 answers, most recent on 2/6/2022

  RE: Trial Version - Missing Codec
  @Arthur-Rasmussen, @emmrecs, @AAProds Hi . . . . As to the matter of Opera being installed, this is clearly shown to be a user-selectable option if you read carefully through each screen that is shown before the actual installation begins. . .
• Web Designer

  No answers, created on 1/18/2022

  Failed to setup for rendering
  Have upgraded from Premium web designer 16 to 18. Imported site from 16 to 18 go to publish and receive the following failure message "Unable to setup bitmap for rendering. The bitmap requested maybe to big" . Yet the site will publish no problem in
• Movie Studio

  32 answers, most recent on 2/6/2022

  RE: Trial Version - Missing Codec
  @emmrecs As to the matter of Opera being installed, this is clearly shown to be a user-selectable option if you read carefully through each screen that is shown before the actual installation begins. @Arthur-Rasmussen does have a point; with all the