• SOUND FORGE

  8 answers, most recent on 5/4/2020

  RE: [Solved] Assist Cleaning Up Audio File
  Not a very good recording, It is very muddy... likely preamp or other input stage distortion. Not a lot can be done to fix that. EQ (equalization) helps some. Below is a screenshot of a 'Track EQ' setting, I can post the preset if you have 'Preset
• Movie Studio

  2 answers, most recent on 9/10/2018

  RE: [Solved] Commentary Audio Quieter after MPEG4 Export
  @DSmitty Hi, Try turning on the Mixer (M) and watching the meters during playback. Is the meter on the narration higher or lower than on the other tracks? Audibly higher or lower? Did you lower the volume of the other tracks using ducking or
• Movie Studio

  59 answers, most recent on 3/7/2024

  RE: [Solved] No Hardware Acceleration / Encoding
  I literally have the same specs as you. I had to get the proper driver for the CPU's Quick Sync video rendering capabilities. Once installed, MEP+ 2018 recognizes the CPU's hardware excelleration, and you can then check the boxes accordingly. All my
• Movie Studio

  10 answers, most recent on 3/10/2017

  [Solved] Audio recording truncated - Object length is limited by range markers?
  When I record audio from my mic, my recording is often getting truncated. This depends on the distance between the range markers. Specifically, if the markers are 1 second apart from each other, any newly recorded object will be truncated at 1
• Movie Studio

  8 answers, most recent on 2/15/2018

  [Solved] No Video :(
  Hi all, I need your help. I'm doing a little project and all was fine, except that when I tested the final clip, it was not stereo. So I decided to redo it and this time I used the Mixer. After I managed to equalize both channels (Left and Right), I
• Movie Studio

  One answer, on 2/21/2008

  RE: [Solved] How does the blue screen effect work?
  Here is some information on how to set up a chroma keying (e.g. blue screen/green screen) project in Movie Edit Pro:First of all, you need to make sure that you have source material that is suitable for a chroma keying effect. Movie Edit Pro
• Movie Studio

  21 answers, most recent on 2/7/2023

  RE: MEP 2016 Copying Attributes To Other Clips?
  Hey John! Got It - Thank you .... 😄 (man that short cut seemed nowhere to be found)? 😬 Just to make sure, there shouldn't be any difference whether I master the EQ using the equalizer (or) the Mixer (correct)? I actually prefer the equalizer
• Movie Studio

  44 answers, most recent on 1/17/2025

  RE: Making Blu-rays
  Thanks for all your help and invaluable information. While I appreciate your query in regard to my iPhone photos, I’ve used the photos & videos from this phone for the last 4 holidays I’ve been on and following each one have had no issues at all
• Movie Studio

  28 answers, most recent on 5/13/2023

  RE: Masking a complicated image
  @johnebaker Hi John. While the ProDad Hide would be no good at your example because my video examples are panned and are not static shots and have complex backgrounds I think Blender would equally be bad with dealing with such a panned clip judging
• Video Pro X

  9 answers, most recent on 7/3/2023

  RE: Video Pro X changes project frame rate to 20 for no discernible reason
  @eSonOfAnder The frame rate is now set to 20 Hz. Always. I've done this multiple times now, and discovered it because every time I tried to export the movie for rendering, it had somehow decided to try and export at 20 Hz every time Hz -
• Movie Studio

  11 answers, most recent on 10/29/2023

  RE: instagram video size
  @kate-m I do! 😉 Basically, you need to set up a square-shaped movie, that is one with equal width and height. That is done in the Movie Settings. Open a new project and then hit key E (or File>Settings>Movie). In both the Width and Height
• Movie Studio

  30 answers, most recent on 3/8/2024

  RE: MMS 2022 Suite, Slideshow Maker
  @Greg123 HI Greg . . . . What I was trying to explain is that my phone take 16:7.33 ratio pictures and i wanted to convert them to 16:9  . . . . Squashing or stretching images is not good practice, and is, as Al has commented, going to look awful
• Movie Studio

  26 answers, most recent on 6/29/2023

  RE: Editing single channel sound (2 tracks) using Sterio
  @Tony-Haack Hi Tony, Panning can be done at the track level in the Mixer or object level under Effects, Audio Effects, General. Try the latter. Both of the objects should play back equally as loud on both channels - left and right using the method
• Video Easy

  21 answers, most recent on 6/7/2024

  RE: Video Easy no longer recording audio in stereo
  @AAProds Hi Al. Video Easy became a subscription service only a long time ago and no longer appears on the main Magix Website. However if you do a web search for it you get to this page which has shown the same information for over a year now. Can
• Other products

  2 answers, most recent on 8/30/2023

  RE: Photo Manager Deluxe wide range of formats but not enough
  @Kelvin-Richardson Hi . . . . out of a folder of 234 items, it only listed the 155 JPG, It did not list any of my .mp4 files or NRW files . . . . Not all MP4 files are equal - MP4 is not a video format, it is a container file format and only
• ACID

  6 answers, most recent on 12/14/2023

  RE: Connecting multiple synths to acid pro 10
  @christopher-pengelly I'm going to return to your reply later today and try and fully envisage your set-up! But one thing strikes me immediately: if you want to connect multiple modules/keyboards/synths to the same output from your interface you
• Movie Studio

  21 answers, most recent on 2/7/2023

  RE: MEP 2016 Copying Attributes To Other Clips?
  @CarpentersMate Hi Mike . . . .  I master the EQ using the equalizer (or) the Mixer (correct)? I actually prefer the equalizer ... They are the same tool/effect - just a different route to acess it and in its scope ie using the mixer applies the
• Photo & Graphic Designer

  9 answers, most recent on 5/10/2023

  RE: Stretching images in one direction only
  I think you're running a slightly different version to me John. I'm on 19.01 and the button you have top left is not part of v19.1. I'm guessing they're trying to streamline the buttons and operations to tidy up a bit and have confused everyone in
• Movie Studio

  90 answers, most recent on 1/13/2025

  RE: Slideshow-Reducing photo length merges Audio track
  @AAProds @Gid I agree with you both, but only partly. We are in the 1% who can figure out the mouse modes and how to use them. The other 99% of the users will make a big mess, as I have described. It is far better to only have to adjust a couple of
• Movie Studio

  13 answers, most recent on 12/30/2024

  RE: Movie Sutdio 2025 Suite - Display Color vs Video Area
  @Henrique-GomesCoe @me_again @johnebaker @AAProds Hi Al. The way I see it, it's got nothing to do with monitor settings/calibration. I don't disagree with that but it could be a difference in your physical monitors panel type or ambient light on the
• Movie Studio

  26 answers, most recent on 6/29/2023

  RE: Editing single channel sound (2 tracks) using Sterio
  @Tony-Haack Hi Tony, More later, but instead of doing what I indicated, another way is to just open the audio part in Audio Cleaning, Stereo Fx and selecting Mono under presets. Of course, you won't be able to adjust the volume of each
• Audio Cleaning Lab

  32 answers, most recent on 11/21/2024

  RE: importing a stereo mp3 file into both tracks seprately
  What are you using for this? The built-in DeNoiser or a third party VST like iZotope Voice De-noise. There are others. John CB Truthfully, I didn't know exactly what iZotope Voice Denoise was, so stayed with what I was familiar with. Having no
• ACID

  6 answers, most recent on 12/14/2023

  RE: Connecting multiple synths to acid pro 10
  @christopher-pengelly I'm going to return to your reply later today and try and fully envisage your set-up! But one thing strikes me immediately: if you want to connect multiple modules/keyboards/synths to the same output from your interface you
• Movie Studio

  44 answers, most recent on 1/17/2025

  RE: Making Blu-rays
  @donjen33 Following your latest post can I confirm that you are burning to Blu-ray disc and not to DVD? I ask that because you mention you had no issues creating DVDs in the past. For the 256GB Memory Stick that now holds apparently 9 nearly equal