• Music Maker

  2 answers, most recent on 7/2/2024

  RE: Keyboard Shortcuts and the Midi Editor
  @Tridensky Does it work if use the separate on-screen-keyboard? Make sure the track is set to MIDI Rec in the track header. The keyboard outside of the midi editor works if i click on it first. But in the editor, all keys in there open up some
• Samplitude

  2 answers, most recent on 3/18/2025

  RE: Latency in VST playback on Samplitude Pro x8
  Hi, Thank you so much for the advice. I've tried altering the settings you recommended to no avail I'm afraid. I have my Yamaha Clavinova CVP-305 plugged into a U6midipro box which is then plugged into my laptop via USB. The driver options i have
• Music Maker

  2 answers, most recent on 9/7/2023

  RE: (MMM/Samplitude Pro X5) M-AUDIO Oxygen 49 MKV Setup Issue
  @Starsickle In Samplitude you can map your controller in the hardware controller settings in the system settings. Have you already looked at this? But Music Maker is very limited in controller customization. A good alternative is the free tool
• Samplitude

  10 answers, most recent on 6/20/2024

  RE: Sampliude music studio x8 stability
  I've had it for a week or so now, having problems with midi playback connecting controllers and softsynths ect, massive pita, the Acid pro 7 installed at the same time no problem, basically plug and play, bit annoyed to find out this x8 is buggy
• Music Maker

  37 answers, most recent on 11/11/2023

  RE: need major help with recording on music maker 2024
  i have a midi controller connected. midi rec was enabled. when i try to record with midi rec on the same track i want to record from, it just records silence and gets rid of the audio / midi track by recording on top of them. when trying to place
• Samplitude

  7 answers, most recent on 12/29/2024

  RE: [Solved] Playback along with audio stuttering every 1-3 seconds
  I have been trying to tweak and troubleshoot my Magix Samplitude settings for a few days now and I'm getting very frustrated 😰Hoping you experts can help! Problem When I playback, I get a minor sound delay before I hear the MIDI track, then ok for
• Samplitude

  7 answers, most recent on 12/29/2024

  [Solved] Playback along with audio stuttering every 1-3 seconds
  I have been trying to tweak and troubleshoot my Magix Samplitude settings for a few days now and I'm getting very frustrated 😰Hoping you experts can help! Problem When I playback, I get a minor sound delay before I hear the MIDI track, then ok for a
• Samplitude

  4 answers, most recent on 3/12/2024

  RE: VSTi Volume Tracking vs Velocity Parameter
  Thanks SP, but I use the excellent Jam Origin VST plugin to convert guitar to midi on the fly when I am playing live, so using automation etc doesn't help. I need instruments with consistent velocity control characteristics. Here's another
• Samplitude

  2 answers, most recent on 6/28/2024

  RE: mixer faders colors / how to assign or change
  @VivaMaretta-Giorgini The color switches to yellow, orange or red if you select in the right click context menu of the fader to controls the AUX level instead of the volume/MIDI velocity. The color depends on whether you select Direct Out,
• ACID

  No answers, created on 10/24/2023

  Serato Sample 2 won't accept MIDI in ACID
  Serato's new Sample 2 plugin won't accept MIDI notes from the piano roll or MIDI controllers. It makes sound if I hit the pads in the plugin's interface. Hope this gets fixed since ACID's stems got removed.
• Samplitude

  5 answers, most recent on 1/25/2024

  RE: [Closed] how do i connect Akai mpk261 to pro x?
  @sherwood-johnson Hi Video Pro X is not a DAW it is a video editor which does not support VST Instruments so cannot be cannot be controlled by MIDI. . . . . t has a lot of preset daws but none of them is for Samplitude or magix products . . . . The
• Music Maker

  11 answers, most recent on 1/30/2024

  RE: [Solved] Changing frequencies of music (solfeggios)
  @SPow You need a sampler VST or synthesizer VST and a tuner. For example, use this free tuner VST from Melda: https://www.meldaproduction.com/MTuner With this plugin you can check whether a played note A4 is tuned to 432 Hz. For other frequencies
• Music Maker

  2 answers, most recent on 8/30/2023

  RE: Vita Sampler notes from VST Pads not recording
  @ron-senyor You need to play the instrument with a MIDI keyboard or MIDI Pad Controller or the internal on-screen-MIDI keyboard. Clicking on the GUI is only for previewing sounds.
• ACID

  6 answers, most recent on 12/14/2023

  Connecting multiple synths to acid pro 10
  Hi everyone So i have been using acid for a very long time, i took the plunge to connecting all my synths up via a midi interface, and have tried to set up the programme to read each synth, the only one i can get working is the midi controller, i
• Music Maker

  20 answers, most recent on 8/11/2023

  RE: questions about working with Music Maker.
  @Former user The easiest way is to add a volume curve via the FX button in the track header. You can then also change the mouse mode to draw it easily. You can also draw controller curves via the MIDI Editor. Curve #7 is for volume but it can be
• Music Maker

  12 answers, most recent on 4/22/2024

  RE: Tyros 2 keyboard recording
  @Richard-Docherty For optimal sound settings please navigate to File > Settings > Program Settings > Audio/MIDI. Here you need to select an ASIO driver, for example the Music Maker ASIO driver. Next, click on the Advanced button next to the
• Samplitude

  2 answers, most recent on 6/28/2024

  RE: mixer faders colors / how to assign or change
  @VivaMaretta-Giorgini The color switches to yellow, orange or red if you select in the right click context menu of the fader to controls the AUX level instead of the volume/MIDI velocity. The color depends on whether you select Direct Out,
• ACID

  2 answers, most recent on 2/11/2024

  RE: Volume envelope (cc7) does not work on VSTi tracks.
  @DJ_Leo It depends on the VSTi whether it changes the volume after receiving cc7 messages. Some do, some don't. A lot of VSTi have a MIDI learn function. Maybe you need to first connect the VSTi volume control to cc7. Thank you--your suggestion to
• Music Maker

  20 answers, most recent on 8/11/2023

  RE: questions about working with Music Maker.
  @Former user DN-e1 doesn't automatically map curve 7 to its volume controller. To map the curve to the controller, open the GUI of DN-e1 and make a right click on the volume controller and select MIDI learn. Then play your song. The first
• Samplitude

  4 answers, most recent on 9/13/2023

  RE: Moving controller data to automation lane?
  @Sidney-Goodroe If i remember it correctly there is an option in the Edit menu to extract controller curves from MIDI objects into track automation.
• ACID

  5 answers, most recent on 3/6/2023

  RE: [Solved] Multiple midi tracks in Acid Pro 10
  hi @Stephen-Maddison, This is by design, although, yeah, it is confusing. The reasoning here is that you would use different midi porgrams / channels on the same soft synth to play different instruments. A lot of orchestral sample libraries work
• Music Maker

  20 answers, most recent on 8/11/2023

  RE: questions about working with Music Maker.
  @Former user DN-e1 doesn't automatically map curve 7 to its volume controller. To map the curve to the controller, open the GUI of DN-e1 and make a right click on the volume controller and select MIDI learn. Then play your song. The first controller
• ACID

  2 answers, most recent on 9/24/2023

  RE: Multiple midi keyboards
  @Mallow Does this help you? https://www.magix.info/us/forum/controllers-found-to-work-well-with-acid-pro--1326224/   @SP. Oh, I think I have worded my question too vague, sorry for that.I was wondering if it is possible to use multiple midi
• ACID

  6 answers, most recent on 12/14/2023

  RE: Connecting multiple synths to acid pro 10
  @christopher-pengelly I'll say from the start that I don't have or use ACID but the principles involved in running multiple external keyboards/synths are universal. So: Please tell us exactly which MIDI interface you have and how many input/output