• Movie Studio

  32 answers, most recent on 10/29/2023

  RE: blip/hiccups at start
  @AAProds Hi Al, Sorry, it's impossible to say! I don't think you can zoom in far enough in MMS/VPX to show such points. Remember, the "sound" in the image I posted actually lasts for 7 thousandths of a second! As to how to avoid such glitches with
• Movie Studio

  84 answers, most recent on 8/5/2024

  RE: Linking "videos" or "projects" question
  @Eric-Elliott Question: When I save something as an MP4 to post later, does MS still keep it also as a "Project" in case I want to change something later or does it change into an MP4 permanently? Eric, You save a project but you export a movie as
• Off topic

  43 answers, most recent on 7/1/2024

  RE: Magix Future?
  @ericlnz Hi Eric, I sent you a PM with the links. Since Magix has parted ways with Xara, they have removed the photo editor from MMS/VPX, PhotoDesigner 7, and replaced it with a link to MS Paint, PaintShop Pro is likely the best alternative for
• Movie Studio

  17 answers, most recent on 7/17/2024

  RE: Drop shadow on Portrait clip.?
  Ooo found the Boris version, it has loads of options But render time rose to an estimated 1.07hrs & maxed out my CPU 😂😂 That's not good 😞 I'll try your MMS version. 👍
• Music Maker

  2 answers, most recent on 1/2/2024

  isotope ozone11 & Native Instrument VST not detected in MM 2024
  Please can anyone advise what I doing wrong. I've install drivers correctly and can locate the files on Windows. Though both Ozone and Native can't be find in music maker.
• Music Maker

  41 answers, most recent on 11/17/2024

  RE: Program reacts very very slow
  @johnebaker  @Can-DiveI think I could have been more explanatory with my comments. I focused on the Text Cursor for my testing since @SP. has commented on the Accessibility features seeming to be a common thread for many users' problems. I did my
• Video Pro X

  33 answers, most recent on 7/15/2025

  RE: keyframe bugs remaining in the current version of VPX17 (v..269)
  @AAProds Just tried Brightness; same, the ending keyframe stays with the object. If I copy the object to another movie, then the ending keyframe diamond disappears but the keyframe effect is still there. Thanks for testing. Since you are using
• SOUND FORGE

  9 answers, most recent on 12/23/2024

  RE: Line in connection from audio source to a Windows 11 laptop
  @Steve-Weeks Hi . . . . Would I need to purchase an external Sound Card to enable this? . . . . Not necessarally, depending on the laptop make/model the single 3.5mm jack may be a combo input, for a microphone the plug has to be a TRRS, ie
• Movie Studio

  3 answers, most recent on 6/30/2025

  RE: Movie Studio (Video Deluxe) vs Video Pro-X
  Hi Last year I migrated from MMS 2024 to VPX16 UltimateIt works more smoothly, has more features and I suggest you give it a try. In my case, I was looking for more control and organization of project clips because it has a "project folder". My
• Movie Studio

  7 answers, most recent on 12/18/2023

  RE: Cannot access the Text to Speech feature
  @Stuart-Gilmour Hi . . . . Text to Speech feature . . . MM2024 Ultimate . . . . Which program do you have - you have posted in the Magix Movie Studio section of the forum, however you say you have MM 2024 ie Music maker. Movie Studio does not have
• Movie Studio

  32 answers, most recent on 6/30/2024

  RE: Scrolling Suggestion-Thoughts Please
  @Gid, @AAProds Hi Gid, Al . . . . with your Shuttle in MMS do you have to click the top of the timeline to place & move the cursor ? . . . . . No, however in some instances you may have to set the focus to the timeline. Here is a demo of how
• Movie Studio

  10 answers, most recent on 10/11/2022

  [Solved] Video deluxe 2021 can't export to 17 fps MP4
  I am editing old 8mm film video which fps is 17 and when trying export the video to mp4 there is bug that I can't export the video with 17 fps. Only 24 fps works...Only 17 fps works when export to avi but not when trying export mp4. Software is
• Movie Studio

  43 answers, most recent on 3/7/2025

  RE: Audio not importing
  @ericlnz MPC - I did have my doubts so thanks for your thoughts. I did mention to @CubeAce the Quicktime box that needs ticking in Depreciated features, his reply was 'I think there must be more project settings as ticking that didn't work for me.'
• Movie Studio

  44 answers, most recent on 5/30/2024

  RE: Movie Studio 2025 Released
  @AAProds Hi Al . . . . Wozzat all about? . . . . Much a do about nothing 😮, other than me trying to complete my comment before going out and misreading the version number I saw .199 and assumed it was the next update for 2024, it wasn't it was MMS
• Movie Studio

  9 answers, most recent on 10/17/2025

  RE: can someone help me remove dog barking and a car racing up the street
  @spuddy13 Hi. As you may have noticed with using the graphic equaliser, when you cut any frequency it not only effects the sound you wish to cut but it also affects the sounds you are trying to hear clearer. It is the same with any program that can
• Music Maker

  5 answers, most recent on 5/2/2024

  RE: i made a song but can not be open, what do i do?
  A correction: I had said *.MMM files are the Backup files -- they're actually the Project files.  Backup files have a .MM_ extension.  You can open these files from within Music Maker (select "All Files" in the File-Open dialog.)  Apologies for the
• Movie Studio

  43 answers, most recent on 3/7/2025

  RE: Audio not importing
  @AAProds, @Gid, @CubeAce Hi Al, Gid, RAy Gary has 2 issues with the video being imported:- Playback issue - this I covered in this comment  Audio issue - Rays, 'oddball' Sorenson encoded video clip giving a similar issue may be relevant once we
• Movie Studio

  9 answers, most recent on 5/14/2024

  RE: Movie Studio 2024, How can I convert the mv_ to mp4?
  @Chris-Royster But, please look again at the first screenshot which @Gid posted, especially the highlighted line. For your exports, what does your screen show as the destination where your exported files will be stored? Again, I need to say (sorry
• Movie Studio

  23 answers, most recent on 2/16/2024

  RE: Using the cut tool while the cursor or movie is playing
  @Kirk-Johnson Hi . . . . The 2023 version of this program was able to cut or edit on the fly while themovie was in motion. . . play the movie in the edit screen, the cut tool greys out . . . . AFAIK has never been possible any Magix Movie Studio
• Movie Studio

  40 answers, most recent on 11/24/2023

  RE: Movie Studio 2024 Choppy/Laggy MP4 playback/preview
  @Videditor01 Do you also have the msi file shown in my image above? You are getting a plugin incomplete message. Maybe it is that file. John would have it on his system in VPX and it may be that it can reside in any relevant folder and does not have
• Movie Studio

  20 answers, most recent on 2/6/2025

  RE: Looking to use this OPENING in newest video.
  @Reyfox @FF22 @Gid @browj2 @johnebaker Hi John. Well, I have used the Boris Particle Illusion program for as long as there has been a free download version and Boris Titler has the same workflow so personally I didn't find it that difficult to use.
• Video Pro X

  58 answers, most recent on 9/12/2024

  RE: [Closed] VPX/MMS update schedule
  @johnebaker Hi John. I forgot to update my profile to MMS 2024 Suite. I haven't run MEP 2022 for some time now. Memory of past use of 3D and drop shadow is probably through rose tinted glasses rather than reality which seems to be the same as it
• Video Pro X

  32 answers, most recent on 7/26/2024

  Movie Setting: Play movie in loop mode?
  The help description is clear but this does not appear to work on my computer as expected. I tested with VPX16 and MMS2024. I expected that the player will move to the end of the last object and then return to the playback marker and start again.
• Movie Studio

  30 answers, most recent on 3/8/2024

  MMS 2022 Suite, Slideshow Maker
  Hi, I just wanted to animate my still photos using Slideshow Maker, so I highlighted few pictures on a timeline, selected Random transitions, collage ..., checked Apply to selected images, pressed Preview...but nothing happened. And Help says its