• Movie Studio

  10 answers, most recent on 7/22/2017

  RE: MEP 17 HD patch and cpu at high levels
  The amount of RAM available also makes a considerably difference to the speed and efficiency with which video editing takes place. Your mention of 3Gb leads me to wonder whether you are using a 32 bit version of Windows? If so, there is no point in
• Movie Studio

  10 answers, most recent on 7/22/2017

  RE: MEP 17 HD patch and cpu at high levels
  Hi and thanks for the additional information. 1920 x 1080 (HD) video is pretty demanding of all but the highest spec systems! Your mention of the CPU being up in the 90 to 100 percent when just doing nothing and being idle leads me to wonder whether
• Movie Studio

  7 answers, most recent on 7/19/2017

  RE: Movie edit pro 2013 won't load past the opening screen
  Hi . . . . get things working, for perhaps until the next Windows 10 update . . . Very true - if Microsoft keep mess about users permissions again, there have, to my knowledge, been 2 updates where, even when you are the only user with
• Movie Studio

  7 answers, most recent on 7/19/2017

  RE: Movie edit pro 2013 won't load past the opening screen
  Actually MEP17+ (Magix Movie Edit Pro 17 Plus), registered in 2010. It sounds like, in the best case, the procedure might get things working, for perhaps until the next Windows 10 update. No assurance. I've tried Windows' WIN7 compatibility mode,
• Video Pro X

  One answer, on 7/16/2017

  Error in module - Steam version
  Hi team, I just installed the Steam version of Video Pro X, every time it starts I get the troubleshooting box stating. Error in module "(Null)" (load address: 0xFFFFFFFFFFFFFFFFF) to address 0x000007EE2ACCD74 (Exception 0xc0000005
• Movie Studio

  6 answers, most recent on 7/14/2017

  RE: Another audio problem .. Audio cleaning not working
  Hi Kami_1, good to hear from you again. You write "No computer changes". I assume you mean no hardware changes, but what about software, e.g. Windows Updates, updates to drivers etc.? My strong suspicion is that it is your on-board soundcard driver
• SOUND FORGE

  2 answers, most recent on 7/14/2017

  How to register Sonic Foundry and Sony versions of SoundForge??
  So, new to the forum, which I just stumbled onto by accident... Would somebody tell me how to go about registering all of my old Sony and Sonic Foundry software that is no longer supported on Sony's website?  In particular, I still use SoundForge
• SOUND FORGE

  11 answers, most recent on 7/15/2017

  RE: Tape-stop effect still available in SF pro 11 ???
  @HHM Thanks, but not updated since 2003, so likely not working on my new W10 machine Actually it does (work on Win 10, that is!) I've just tested it on my W10 i7 machine (though not in SF since I don't have that) and it works very well! Just need to
• Video Pro X

  6 answers, most recent on 7/15/2017

  "Faster" than current MEP 2017 engine?
  On shutting down MEP 2017 Plus at present I am encouraged to buy "Video Pro X9: THE BRAND NEW VERSION" for GBP 150. The blurb says, with true marketing-speak deliberate vagueness, Up to 5x faster + smooth 4k editing. Can anyone advise please if this
• Movie Studio

  37 answers, most recent on 6/26/2017

  RE: Preview rendering 'Auto' over-confident?
  Another alternative to FRAPS is the one built-in to Win 10. As I'm not a game player I've only just discovered it. With Google Earth open, and ready to play a tour, or ready for me to manually pan/zoom/tilt/rotate, I press Win+Alt+r to start or stop
• Music Maker

  No answers, created on 6/19/2017

  Not possible to authorise previously purchased expansions?
  I purchased Electronica Hook Vocoders expansion a while back, but after reinstalling Music Maker to updated laptop (from Win7 to Win10) there is no way to put in my authorisation code? There is a link to buy the expansion again (which obviously I do
• Movie Studio

  46 answers, most recent on 6/10/2017

  RE: Why doesn't the HVEC work?
  Hi Does MEP play an HEVC clip on the timeline in the preview window - IOW can you tell that the Magix purchase of the Codec has installed correctly? The later i7's have hardware decoding/encoding support for HEVC but it should not prevent it from
• Music Maker

  8 answers, most recent on 3/18/2020

  RE: Error 59 in Magix Music Maker 2017
  Thank you John. However, it is not the migration to windows 10 which caused the problem (I was running windows 7 before and after the problem appeared). I am still running my PC under the same Win 7 OS. After applying the procedure described in my
• Music Maker

  3 answers, most recent on 5/5/2017

  RE: 2017 premium and update
  Andrew-starkey : Hi, yes I'm having major problems with Magix Music Maker Premium 2017 after the recent update. After the update : 1) I had an ERROR -59 message - Installation folders may be damaged 2) Tried reloading the update ... same result as
• Movie Studio

  3 answers, most recent on 4/14/2017

  Audio offset (MEP 2016 premium)
  Hi, This problem is a first for me. Video, audio and text frame, whether or not grouped, about 3/4 into the 33 sec. clip. SD - Variable bit rate. Audio offset is at zero; I even tried "reset." With the Export (mpg), the audio is heard several
• Movie Studio

  14 answers, most recent on 9/16/2018

  RE: Does not install in English [Resolved]
  At the end of the week Magix finally sent me very detailed instructions on how to select the language. All you need to do is manually launch the download manager by appending the -force parameter. For example: video_deluxe_2017_dlv_dlm.exe
• SOUND FORGE

  13 answers, most recent on 4/1/2017

  RE: Sound Forge 11.345 still damages sound files
  I have read the board messages and I'm still not sure what to do exactly to recreate the bug you wanted to report. I think the key to report an issue is being brief and clear in explanation. I suggest posting a step-by-step instruction that
• Movie Studio

  One answer, on 3/29/2017

  Importing pics (.jpeg)
  Hi I am an estate agent (realtor) and use Magix Movie Edit Pro 16 HD on an Acer 7730 laptop running Win 7. I import .jpegs in order to create a slide show and export in .mpeg4. The problem is when I import a pic that was shot by the camera in
• Movie Studio

  12 answers, most recent on 4/2/2017

  RE: Aspect ratio inconsistency
  Hi Terry . . . . Win 10 File Explorer thumbnails frequently not refreshing after changes . . . . Any thoughts on that thumbnail problem? . . . . There should be a file called Thumbs.db in the image folder - delete it and it will be recreated and
• SOUND FORGE

  One answer, on 3/22/2017

  New install on Win7 and SForge won't show levels or a Cursor
  I recently loaded a fully licensed version of SForge 11 onto my new Win 7 desktop..except S Forge won't record... has no cursor bar that moves, nor do the VU meters function. Extremely bizarre. If I try to record... and move my cursor into the edit
• SOUND FORGE

  2 answers, most recent on 3/20/2017

  RE: Can SoundForge be authorized for use on 2 sys. disks on the same PC?
  Welcome Mr. Olhsson a follower (and admirer) here.I have two Soundforge 11 authorizations running on the same laptop. One on Win 7 for my musical tasks exclusively, and the 2nd on Win 8.1 for the daily duties, both 64 bits.Both behave perfectly
• SOUND FORGE

  One answer, on 3/13/2017

  RE: older versions upgrade?
  As I recall earlier versions of SF will run in Win 7, 8 & 10. SF-11 (at least the latest builds) need Win 7 or later. FWIW, SCS (Sony Creative Software) screwed up SF-11. The plug-in chainer and record GUI are a mess now IMO. I'd stick with an
• Movie Studio

  76 answers, most recent on 3/13/2017

  RE: HDR effect does not work with MEP2014, 2016 or VPX7 on new machine with new Win10 Pro installation
  Hi John, I'd personally be reluctant to drop back from version 12 to 11, as I'd be nervously waiting for some unwanted side effect. -------------------- I submitted a Support Request on 11th March and copied Ralf. It's almost identical to my post
• Movie Studio

  76 answers, most recent on 3/13/2017

  RE: HDR effect does not work with MEP2014, 2016 or VPX7 on new machine with new Win10 Pro installation
  Hi Terry . . . . Which number do you mean? My MEP 2016 version is same as your. . . . . If you look at the image of the table comparing the dll's in this comment above and reproduced below, your MEP 2016 MxVfxHDR_x64.dll is 1.020.885 whereas mine is