• Movie Studio

  34 answers, most recent on 12/4/2022

  RE: What is most important to have in a video editing PC build using Magix
  @Tusk Hi. No, john isn't saying that, but the drive does need to be sufficient to enable to deliver the chunks of audio and video ahead of being needed to process. A lot will depend on the amount of tracks running in parallel at the same time, such
• Movie Studio

  26 answers, most recent on 9/25/2022

  RE: Vegas video Stabilisation not working in Movie studio 2023.
  Not sure about it being a good deal. There is more to video than stabilization. It is one part that I seldom, if ever use. I have Mercalli V5 and V6 and have yet had a need to use them. There are other factors in editing. How fast can I edit, and
• Movie Studio

  17 answers, most recent on 8/22/2022

  RE: Magix Video Resolutions Incorrect?
  Sony thinks 4k is 3840 x 2160 as well: https://www.sony.com/electronics/support/articles/00044504 As does virtually every other Google hit on "what is 4k". Despite that, I now see the technical difference between UHD and 4k. Which raises a question:
• Music Maker

  6 answers, most recent on 12/27/2022

  RE: (FIXED) Upgraded from MM 2022 Prem to 2023 Prem. Slow Response
  Update: Have tried the following versions with the same issues on now 4 computers in the house (was going to buy more copies for wife and daughter while on sale but holding off now) and also tried running them in safe mode as well. The only one that
• Video Pro X

  39 answers, most recent on 4/24/2023

  RE: Video Pro X14 - Bug List
  @johnebaker Hi John. I do understand that people will have their own way of working and setups for folder paths and contents may vary. It just caught me out not producing a folder automatically as normally I would import the files into a
• Movie Studio

  24 answers, most recent on 8/1/2022

  RE: Fail to adjust the frame rate for blue-ray disk (BD)
  @dirkc_be I've published the video on Youtube, and yes the quality is HD (framerate not known) Dirk, right-click on the video in the You Tube player and choose "Stats for Nerds". That will tell you the framerate. When I export the video as mp4, in
• Movie Studio

  4 answers, most recent on 9/18/2022

  RE: Sony A1 video
  @Venkatesh-VTVT Hi. Video editing is very computer power intensive. The more Mbs per second the machine has to handle the higher the specification has to be just to get any video editor to play smoothly, so all components used within the processing
• Video Pro X

  42 answers, most recent on 9/25/2022

  RE: Question regarding video upscaling
  @jak.willis Jak, will watching the video with it zoomed out (so not filling the TV screen) make the picture quality better because it isn’t being upscaled as much? Yes. Any video, whether previously upscaled or not, will look better on a smaller
• Movie Studio

  296 answers, most recent on 3/29/2025

  RE: [Closed] Feedback on Movie Studio 2023
  @ericlnz Hi Eric. Missed that in the first line. A business has to move forward to generate cash or die. That is the consumer model, 😉👍 love it or hate it. They can't rely on people buying add on products such as templates or realistically charge
• Video Pro X

  36 answers, most recent on 12/2/2022

  RE: Video Pro X14 lags/freezes on Move or Resize, even when run as Admin
  @Galaxy @johnebaker @browj2 Hi. I'm not sure how we are supposed to reply to this. Is eight days excessive for a reply from Magix? Based on my own previous experiences I would say yes but at this time of year with staff illnesses a possibility I'm
• ACID

  9 answers, most recent on 11/26/2022

  RE: Acid Pro 11 Programme Update Error
  I hope this comment does not come across as crass or dismissive. I read all the comments and there are very useful suggestions and points made. The advice to turn off Controlled Folder Access did work and allowed the installation of the last
• Video Pro X

  10 answers, most recent on 8/3/2022

  NEW Video Pro X14 Freezes on Playback and Editting Executions
  I upgraded my Video Pro X13 to Pro X14 a few days ago and I have not been able to produce a smooth editting process at any level. After every keystroke, I have to wait about 1 to 3 minutes for a program freeze to release before I can continue the
• Movie Studio

  67 answers, most recent on 9/16/2022

  RE: playing video
  @derek-brown Hi Derek. An SSD should not be regularly de-fragmented. There is no need for that. I was concerned for the project drive. Fragmented drives can cause problems if the data is spread around or a file is not on contiguous sectors of the
• Movie Studio

  14 answers, most recent on 8/7/2022

  RE: Stuttering video when exporting DJI Mini 3 Pro drone footage
  Hi John & Ray Well, I've dusted off my old desktop which hasn't been used since pre pandemic days! After downloading 2 years worth of Windows updates, I've tried exporting the offending project, and am getting similar stuttering results as my
• Video Pro X

  46 answers, most recent on 12/8/2022

  RE: HEVC compression artifacts
  @nicolesharp100 Hi . . . . Simply loading the video into Video Pro X14 and then exporting it as HEVC with the best possible settings (for a 60 MBd video) will reproduce the compression artifacts. . . . . Why are you still exporting at 60Mb/s? As
• Movie Studio

  24 answers, most recent on 8/1/2022

  RE: Fail to adjust the frame rate for blue-ray disk (BD)
  @AAProds Hi . . . . John, I don't think your comparison is valid. 50P is twice the number of frames as 25P and therefore requires twice the data. Comparing the two with the same bitrate (or in your case lower bitrate for 50P) I think is not going to
• Video Pro X

  42 answers, most recent on 9/25/2022

  RE: Question regarding video upscaling
  @jak.willis Hi Jak. I thought it was worth mentioning just in case. The problem is that when we used TVs that had CRTs instead of Back Lit LED panels or similar, the actual phosphorous site that was struck on the screen in the vacuum tube to produce
• Photostory

  26 answers, most recent on 8/17/2022

  RE: Burning a DVD
  All of the photos in the slideshow were taken with my Canon EOS Rebel T1i/EOS 500D digital SLR camera. I have used this camera to produce several Photostory Easy slideshows between 2014 and 2019. The camera features CMOS sensor with 15.10 effective
• Movie Studio

  20 answers, most recent on 8/29/2022

  RE: Same MVP, Movie Edit Pro Plus works, Movie Studio 2022 Platinum hangs
  Thank you all for your contributions. First, thanks to @AAProds, but changing to your suggestion (File > Settings > Program > Device Options to "CPU") did not improve the situation, still hung. So, I leave them as original default settings,
• Movie Studio

  26 answers, most recent on 8/20/2022

  RE: Sound Mixing problems
  @johnebaker @browj2 Thank you both for being understanding. Sometimes I can get caught up in a problem and only see certain solutions. Working on audio within MEP and VPX is not always straightforward for me. I am a very visual person and I like
• Movie Studio

  12 answers, most recent on 7/31/2022

  RE: How to import new transitions, presets and templates for VHS effects
  @johny_lovin_it Do I need VPX 14 for this? No, you could also do the same in Movie Studio (Move Edit Pro). It's just that VPX is a notch up for speed and accuracy with the correct hardware. By that I mean some of the basic controls have more
• Movie Studio

  26 answers, most recent on 11/20/2022

  RE: Movie Edit Pro - Audio crackling when crossfading video files.
  @FernandoBadler @johnebaker @AAProds @Marc-Goder Hi. There is a marked difference in the way audio files are generally handled in a video editing application than a dedicated audio editor. A video editor has to load the audio and video data in
• Web Designer

  9 answers, most recent on 7/21/2022

  RE: Remove .htm From Web Address
  @Inked . . . . For example if we even look at this very web pages URL it doesn't display the .htm or .html at the end. . . . . It wont, this site is a Content Management System (CMS) driven website, with jQuery scripting and a database at the back
• Movie Studio

  24 answers, most recent on 8/1/2022

  RE: Fail to adjust the frame rate for blue-ray disk (BD)
  @dirkc_be Go through the Burn process and choose AVCHD. In the encoder settings, you'll find a 1080P50 option. Ignore the bit about "for SD card". I'm sure there are free programs for burning the ISO (see below) to a BD (I don't do BDs so I can't