Search the MAGIX Community for tutorials, questions and solutions as well as for forum members

When I press mouse right button, I would like to find a feature "duplicate track". Because of the layering sounds. The new track - which is a duplicate of the original track - should be under the original track. This happened a minute ago. I edited

Music Maker

One answer, on 12/11/2021

Sudden stuttering/slow performance on playback

I have used Music Maker for many years on a Windows 7 laptop with 4Gb of RAM which is not connected to the internet. There is very little on the laptop apart from my arrangements and Audacity. Suddenly, when I play any full track, there is a delay

SOUND FORGE

3 answers, most recent on 12/8/2021

RE: Sound Forge Pro vs Audio Cleaning lab?

ACL= Audio Cleaning Lab SLP (SpectraLayers Pro), was originally developed by Robin Lobel and published by Sony (or was it Sonic Forundry) along with Sound Forge, Vegas and Acid, and subsequently acquired by Magix with the other SCS A/V apps. However

ACID

No answers, created on 12/6/2021

vocal track recording

how can i stop my vocal track from recording the beat im using? my headphone volume is on zero. i dont record my voice nor any sound but the track registers the beat recording directly from the software not from my mic. can yall please help me with

Samplitude

One answer, on 11/30/2021

RE: Pitching up AND only recording 1 side

@Joshua-Epstein Please check the sample rate in the project settings. If the pitch is too high you are probably recording in 44.1 kHz and playing back in 48 kHz. If this doesn't help maybe there is something broken in your program settings. You can

Movie Studio

63 answers, most recent on 11/30/2021

RE: MEP Premium - Preview rendering ignores crossfades?

@johnebaker @browj2 @Former user Hi John. I was referring to the power output of such a graphics card under a hard load compared to a lesser card drawing less power but over a longer period for say rendering a project or while playing one. I don't

Movie Studio

63 answers, most recent on 11/30/2021

RE: MEP Premium - Preview rendering ignores crossfades?

@Former user @browj2 As a side note did anyone notice because I didn't use any sound tracks there are no gaps in the tracks? Ray. @johnebaker in his vid 2,3, 4 is filled but with no sound mine still created gaps Rays vid - Mine - Weird tho how

Movie Studio

63 answers, most recent on 11/30/2021

RE: MEP Premium - Preview rendering ignores crossfades?

@Former user Hi . . . . Considering the power requirements for newer graphics cards and the additional cost of running one I'm not sure. . . . . You should find that when the processor and RTX is not rendering their power consumption drops to near

Movie Studio

63 answers, most recent on 11/30/2021

RE: MEP Premium - Preview rendering ignores crossfades?

Just tried that skewed with no sound track & it still created gaps, I also tried the one that is just is called 'Collage' I did about a dozen, n i can only describe them as bollocks, none loaded or played right, I don't use these collages tho

Movie Studio

63 answers, most recent on 11/30/2021

RE: MEP Premium - Preview rendering ignores crossfades?

@Former user @browj2 As a side note did anyone notice because I didn't use any sound tracks there are no gaps in the tracks? Ray.

ACID

4 answers, most recent on 11/30/2021

RE: Instability issues - what to do?

maybe someone can help here on some of these issues? i managed to compile a big portion of them: - when having a plug in chain in use and you add a new plug in, all the plugins get defaulted.- when opening more of the same vsts only the first vst

Movie Studio

63 answers, most recent on 11/30/2021

RE: MEP Premium - Preview rendering ignores crossfades?

@Former user @browj2 @johnebaker Hi Gid. Thanks for trying it out. It's pretty much the same problems I'm having except your runs smoother with less dropped frames. It ran beautifully in MEP 2020 so I'm not sure what is going on. I was surprised at

ACID

One answer, on 11/26/2021

Record MicroFREAK MIDI Keyboard sounds, with MIDI tracks?

Hi gang!How do I record what I am hearing from my wonderful new MicroFREAK?I can hear the audio over my PA System, but none of the MicroFREAK "Sounds" get recorded. 😅

SOUND FORGE

13 answers, most recent on 11/27/2021

RE: wont accept my serial says already used

@robert-k5134 I don't see a Sound Forge Audio Studio license in your screenshots. It shows the WizardFX Suite! You need to install the WizardFX Suite and add the installtion path to the VST path in the program settings of Music Maker and then scan

Movie Studio

8 answers, most recent on 11/25/2021

RE: Audio Mixing Question

@jak.willis Hi Jack. They can't, and believe me some sounds are not reproduced on some sets but the sound is mixed on Studio monitors not headphones in as neutral a sound environment as possible. Studio control rooms tend not to have reflective

Movie Studio

8 answers, most recent on 11/25/2021

RE: Audio Mixing Question

@jak.willis Hi, Well, audio is a very complex subject. If you take a look at what the pros do, they use several types of speakers and headphones knowing that the listener may be using a cell phone, cell phone with headphones - cheap to expensive,

Movie Studio

8 answers, most recent on 11/25/2021

RE: Audio Mixing Question

@jak.willis Hi Jack. They can't, and believe me some sounds are not reproduced on some sets but the sound is mixed on Studio monitors not headphones in as neutral a sound environment as possible. Studio control rooms tend not to have reflective

Movie Studio

8 answers, most recent on 11/25/2021

RE: Audio Mixing Question

@jak.willis Hi, Well, audio is a very complex subject. If you take a look at what the pros do, they use several types of speakers and headphones knowing that the listener may be using a cell phone, cell phone with headphones - cheap to expensive,

SOUND FORGE

One answer, on 11/22/2021

RE: My sound forge working with only one audio input

I am not familiar with the Octa-Capture interface. If you are wish to record Zoom or other online meetings audio and video, you can do that directly though the meeting's 'recording' option, desktop or through the browser (with the meeting host's

Music Maker

63 answers, most recent on 12/2/2021

RE: Can I custom shape instruments in your INDEPENDENCE PRO PLUS SUITE?

@DELGADILLO-JAVIER Yes, you can record in Music Maker like you can record in Audacity. Just select the audio driver for your Tascam interface in the Music Maker program settings and you should be good to go. You can edit the recording settings by

Video Pro X

86 answers, most recent on 12/31/2021

RE: What am I missing out on by sticking to V17

@johnebaker @DesertSweeper VPX 13 and MEP 2022 have a tracking bug, objets is offset from where it should be - I raised a support ticket on this Hi John. Why does this sound like it is linked to the size position problems? Do you think we will get a

Music Maker

One answer, on 11/20/2021

How come the tracks pitch up when I start to record audio?

It never fails and it's frustrating. I lay down the tracks I want to sing with. Click on record and everything speeds up and sounds like it's like three octaves higher. I've tried everything and nothing works. This is the last time I spend money on

Movie Studio

42 answers, most recent on 11/21/2021

RE: Capturing Mini DV: Is it possible to adjust the output file type ?

@CarpentersMate Hi Mike. Muxing is just combining everything you do in a video editor such as edit the video and sound tracks as well as titling etc and compress into the final container format as a single file to be read by a player. As I said,

Music Maker

4 answers, most recent on 11/16/2021

Master volume and mute buttons randomly break.

This has happened twice now. While working on a project, the master volume and mute buttons stop responding. Most of the loops volumes are in the red and I can't change it. I was dragging and dropping loops into tracks(the tracks had loops in them