• SOUND FORGE

  16 answers, most recent on 11/28/2020

  RE: [Solved] Setting LUFS levels
  Pro 11 and later includes the LK/LU meters and the loudness data in the 'Statistics,' A Statistics icon can be added to the toolbar and/or a keyboard shortcut. The LU factors were not available in Pro 10 (prior to the US broadcast CALM act). FWIW,
• SOUND FORGE

  6 answers, most recent on 11/12/2020

  [Solved] Volume Adjust Automatized
  Good Morning ! I made a recording with a microphone. On the street, using a portable recorder. For various reasons, there are times when the sound gets too loud, and there are times when it gets too low. Passing the recording to the computer, I
• Music Maker

  5 answers, most recent on 8/9/2021

  [Solved] MIDI different keys are different volumes
  Hi i need to know why the midi keyboard keys are a different volume each time i press 1. sometimes it gets lower and lower each time i press. sometimes if i press too hard it is very loud, then next key will be very low. i need it to be stable. can
• Music Maker

  2 answers, most recent on 6/15/2020

  [Solved] Why can I only hear the left channel of my micro?
  I made a song in Music Maker and now I want to add the vocals. I created an audio track (configurated it as a mono track) for the vocals and I use a Rode micro that I connect to my Focusrite 4|4 Scarlett audio interface. I can hear my voice loud and
• SOUND FORGE

  16 answers, most recent on 11/28/2020

  [Solved] Setting LUFS levels
  Hi all, I record and edit a lot of VO audio and for the past 20 years, have been using Normalise to keep levels consistent. However, I have a client who has asked for the audio to adhere to the following loudness specifications:ITU BS.1770 with a
• Movie Studio

  52 answers, most recent on 4/8/2020

  [Solved] Audio problem with playback of old .avi files
  Using Movie Edit Pro v.19.0.1.31 with Win10 but have also had this problem in earlier versions of MEP. When I import an old Sony hi8 video, the video is fine but the audio is corrupt and noise so loud you can't understand it - sounds like the film
• Samplitude

  4 answers, most recent on 11/30/2018

  [Solved] Gahh! What will convert to midi in Melodyne?
  So I was over the moon to get Pro X three suite as I can't play piano. I tried an export from Music Maker with a tune and sure enough Melodyne converted a nice approximation. Now I actually want to use Pro X3 for a project, the simple piano tune
• SOUND FORGE

  9 answers, most recent on 5/17/2018

  RE: [Solved] RMS normilize
  After you apply the 'necessary' processing, EQ, compression/limiting, use the 'Statistics' process to obtain a read out of the peak and RMS values. I would use peak normalization to insure your program audio does not exceed the stated -3.0 dBFS
• SOUND FORGE

  4 answers, most recent on 4/17/2018

  [Solved] Soundforge pro 12 Questions/Issues
  I have been enjoying Soundforge for many years and took advantage of the Version 12 offering primarily to benefit from the 64 bit architecture. I have run into a couple of issues which may be my fault but have not been able to solve them. 1 - Cannot
• Movie Studio

  16 answers, most recent on 5/21/2017

  RE: [Solved] Start of mic recording amplified excessively - rest is OK
  Brilliant, that's it, thanks so much John! That's the option I suspected here: "...there must be a setting that's bringing every audio output up to some sort of 'normalised' level" I failed to find it after many frustrating hours! Amongst many other
• Movie Studio

  8 answers, most recent on 9/18/2023

  RE: MEP and NUC PC
  @martin-brennan Your NUC has a Thunderbolt 3 input, so you should be able to connect an eGPU case to it and plug a GPU into the case. I personally have a NUC10 with a Razer Core X and an Nvidia 3000 Series GPU. The problem with NUCs is that they
• Movie Studio

  39 answers, most recent on 8/12/2023

  RE: Movie Studio - Audio and Music Editor 3
  @CubeAce Hi Ray, This is somewhat off-topic. Regardless of using a luffs meter or not I have found that the closer you get your recordings to peak to within .05db the less YouTube will re-encode and compress the sound of the finished video. The more
• Movie Studio

  39 answers, most recent on 8/12/2023

  RE: Movie Studio - Audio and Music Editor 3
  @Tony-Haack Further to my previous post, there are a lot of factors to consider about audio and getting the narration right is just one of them. The main objectives are: Getting a consistent and appropriate perceived loudness for the overall
• Movie Studio

  26 answers, most recent on 6/29/2023

  RE: Editing single channel sound (2 tracks) using Sterio
  @Tony-Haack Hi Tony, Panning can be done at the track level in the Mixer or object level under Effects, Audio Effects, General. Try the latter. Both of the objects should play back equally as loud on both channels - left and right using the method
• Movie Studio

  One answer, on 8/24/2023

  RE: Audio is clipping once rendered
  @garrick-h Hi Garrick and welcome to the user to user forums. Assuming you are using Movie Studio 2023 or above. If the sound is only crackling on export then the sound from your sound track/s are set too loud for export. They do not distort in the
• Music Maker

  20 answers, most recent on 8/11/2023

  RE: questions about working with Music Maker.
  What's "Curve #7"? As far as I understand FX will have an effect on the whole track. For example, I have a 100-note MIDI file on 1 audio track. I need to make some notes quieter and some louder. It is clear how to do it. There is "Velocity" in MIDI
• SOUND FORGE

  One answer, on 3/14/2023

  Loud Noise When Pausing or Stopping Playback
  I get a high pitched noise for about 5 seconds whenever I pause or stop playback of a voiceover audio track. Does anyone know what may be causing this and how to solve this issue? Thanks in advance for any support. (Audio Studio 15)
• SOUND FORGE

  10 answers, most recent on 1/11/2025

  GoPro Audio Problem - Any way to restore
  Hi, I have a problem with the audio part of a video file recorded on a GoPro Hero 5. This happens occasionally. All other recordings of the day, about 2 dozen, were fine. I can hear the sound very faintly, but the waveform shows that there is audio
• Video Pro X

  148 answers, most recent on 4/18/2023

  RE: General discussion on add-ons
  @Reyfox, @ericlnz, @browj2 Hi . . . . We are getting a little OT from "add-ons" but anyway three comments. . . . . Bringing the topic back to "add-ons" - 2 are mentioned below 🙂 On the subject of Normalising, I am with John CB on this one. I no
• Movie Studio

  39 answers, most recent on 8/12/2023

  RE: Movie Studio - Audio and Music Editor 3
  John - very helpful. I have improved my microphone sound with your advice. I have downloaded the YouLean Loudness meter program - I presume the free version to start with? I have been searching both the Magix manual, and online. I have failed your
• SOUND FORGE

  10 answers, most recent on 1/11/2025

  RE: GoPro Audio Problem - Any way to restore
  @johnebaker Hi John EB, Not to confuse the two issues. The recording of the woman with the mic was fine, except for the effect, reverb, that the DJ likely had on the mixer. See ** below. I just used the DeReverb a bit and also got rid of some
• Movie Studio

  32 answers, most recent on 10/29/2023

  RE: blip/hiccups at start
  @AAProds Hi Al, are you saying the audio level must be zero at the butt join No, I'm not. What I'm saying is that all sound is transmitted in the form of waves; those waves have positive (expressed as, e.g. 0 to + 10) and negative (expressed as,
• Samplitude

  6 answers, most recent on 6/13/2023

  RE: [Closed] How to turn off velocity sensitivity from Midi Keyboard
  Hi . . . . the keys only send music when I push them already halfway, and when I push them to the maximum or heavy, it's not sounding loud. . . . . To use the velocity control to control the volume depends on how fast you press the keys, not how
• Music Maker

  6 answers, most recent on 2/22/2023

  The recorded Audio is not working as it should after i Exported
  Hi! After the last song I made im getting this extremly annoying problem everytime I mix it down and export it. It has always worked smoothly with and without any singing recorded. But now it doesnt work anymore. When im happy with the song, I