• Movie Studio

  32 answers, most recent on 12/17/2021

  RE: No sound on MTS or M2TS files.
  @johnebaker I'm sorry, I wasn't clear in my OP. When I leave town to video, I carry a laptop w/ my software on it so I can check out the video I recorded, or if I have time to rough edit before I fine tune on my home PC. My home PC is the one that
• Photostory

  7 answers, most recent on 12/2/2021

  RE: How does this offer work?
  John, I went to NB FX and purchased that first, thinking that would include PS. I guess the wording tripped me up a bit, but I thought that was correct. Everything’s open to interpretation I guess. No discount for me!! Thanks. Mike
• Movie Studio

  One answer, on 11/19/2021

  RE: movie encoding failed
  @jostval Hi The log file is a normal text file, you can open it in Notepad and copy/paste the appropriate section where the error message is. Was the error message an Error code -5 ? If so then the most likely causes are a video image or other
• Movie Studio

  14 answers, most recent on 11/18/2021

  RE: Need Advice! MEP vs. Vegas vs. Davinci vs. Downgrade
  @me_again First. Hi Andy. That works great and does not trip the Infusion engine. Thanks for the much quicker workaround. @jerancampy22 Both MEP and VPX seem to be suffering the same bugs at present so from that standpoint you will have the same
• Movie Studio

  14 answers, most recent on 11/18/2021

  RE: Need Advice! MEP vs. Vegas vs. Davinci vs. Downgrade
  @jerancampy22 Hi. There is nothing wrong with your system. It's way above spec for MEP 2022. For most of us here it works well enough but if I was a niggled as you are my first choice would be to go back to MEP 2021 if it worked well enough for you
• Movie Studio

  3 answers, most recent on 11/11/2021

  RE: Can not export!
  @Carl-Schillander Hi . . . . Why is it slower than slow? Blaming my computer is not correct. . . . . From what you posted above indicates you have a GTX470 GPU. The GTX 470 does not support Hardware Acceleration as it does not support NVENC, the
• Movie Studio

  3 answers, most recent on 11/11/2021

  RE: Can not export!
  @Carl-Schillander Hi Carl. It's time to stop using your nvidia card for hardware acceleration I'm afraid. Using any video editor relies on three things. The application, the operating system, and the graphics card drivers where applicable. Any
• Movie Studio

  9 answers, most recent on 11/3/2021

  RE: Issue to exporting videos to 4K
  H @Sandor-Szabo Hi. The reason I mentioned you using the speed controller effect is that some of the the clips are also very short in one section as if you were trying to make some sort of effect and if you haven't slowed down every clip to exactly
• Movie Studio

  9 answers, most recent on 11/3/2021

  RE: Issue to exporting videos to 4K
  @Sandor-Szabo Hi. I have found that if I use the Intel HD for GPU acceleration in any of MEPs GPU settings boxes that will sometimes trip out a project on exporting. Use nvidia, nvidia, nvidia. but don't change the settings with a project open. Open
• Movie Studio

  16 answers, most recent on 10/13/2021

  RE: [Closed] Upgrade / Update?
  @jerancampy22 This is just my opinion and observations so far. For anyone wanting to edit HD and above material that doesn't have an nvidia 4GB Pascal, Turing, or higher specified graphics card and a 4 core multi-thread CPU, then I feel the answer
• Movie Studio

  6 answers, most recent on 10/11/2021

  RE: MEP 21.0.1.92 export crash: possible solution?
  @MikaS @johnebaker Hi John. For me the nvidia, nvidia, nvidia options have been the most stable and fastest on my machine so far. On some projects selecting HD 630 has tripped out the HD 630 on Processing. Both on playback and exporting. Old
• Movie Studio

  6 answers, most recent on 10/11/2021

  RE: MEP 21.0.1.92 export crash: possible solution?
  @MikaS Hi . . . . Import, Processing and Export: CPU, Geforce GTX 1060, Intel HD graphics 630 and Microsoft WARP device. Which options should I choose for those categories to get the fastest (but still stable) results? . . . . You have 2 conflicting
• Movie Studio

  4 answers, most recent on 10/5/2021

  RE: Transferred to new computer. Not showing Project timeline, only video
  The F9 trick worked fine. Much appreciated. That was frustrating. I had downloaded the manual but not found that but now when I search for F9 I acknowledge I just missed it. I had searched for "project" and "video" but didn't trip over that
• Movie Studio

  8 answers, most recent on 10/1/2021

  RE: Program won't Burn DVD or BlueRay
  @Cecil-Gonzales Hi The encoding is tripping up on not getting the correct frame for the Speed effect, Interpolate frames option - have you used the Speed effect to slow down any of the video clips. If not, then select all the video clips, select the
• Movie Studio

  114 answers, most recent on 7/5/2022

  RE: [RELEASE] Movie Edit Pro 2022 - Your Experiences. Your Movies.
  @Scenestealer, @CubeAce Hi Peter, Ray . . . . I have found the program to be very project and export sensitive in that respect. Occasionally running a project has tripped an export with a 'The (A/B) GPU has been disabled.  . . . . I agree with this,
• Movie Studio

  114 answers, most recent on 7/5/2022

  RE: [RELEASE] Movie Edit Pro 2022 - Your Experiences. Your Movies.
  @Scenestealer Hi Peter. I think I said at one point I had never known any previous version of MEP to be so dynamic in it's use of resources. I know I mentioned ram usage dynamically changing but that includes which GPU is doing what depending on
• Movie Studio

  114 answers, most recent on 7/5/2022

  RE: [RELEASE] Movie Edit Pro 2022 - Your Experiences. Your Movies.
  @MAGIX_Redaktion @johnebaker Hi John. I am getting other one off oddities as well. Last night ProDAD Mercalli V5 Suite went into trial mode and would not let me reactivate it until had rebooted the system. Then after getting it to work again it
• Video Pro X

  122 answers, most recent on 11/21/2021

  RE: Proposed new computer specs for using VPX
  @browj2 @AAProds @PATIENT-X @johnebaker I am going to disagree with Alwyn on both points. Although official nvidia figures from nvidia state the power consumption maximum as lower, looking at reviews of real world testing by people I trust on such
• Movie Studio

  41 answers, most recent on 10/30/2023

  RE: Movie Studio Edit 18 exporting in non "standard" frame rates.
  @Bol Hi Rob. Thank you for the clarification. Do you feel that the main concept encoding is now too old to work effectively with newer nvidia cards then and that the problem is therefore there? I personally do not like the MainConcept encoder as
• Music Maker

  157 answers, most recent on 12/30/2025

  RE: Wishlist for the next Music Maker!
  @MAGIX_Redaktion Sorry that we don't have many brilliant ideas, but that is mainly due to the stability problems encountered with the last few versions of Music Maker. So: Ditto what the others said. Fix the bugs. Fix the video part (importing mxv
• Video Pro X

  218 answers, most recent on 9/16/2021

  RE: [RELEASE] Video Pro X13 – SIMPLY HIGH END.
  @johnebaker Patch 19.0.1.107   Edit Wave Externally After doing a mixdown on an object, I was able to edit the wave file externally in Music Editor multiple times in the same session. Didn't check patch 107. This is an improvement as it could not
• Other products

  5 answers, most recent on 7/10/2021

  RE: Can't download photos from Iphone
  Thanks for all replies. I'll just blame this on COVID. That's not exactly cynical. Only a hobby photographer on trips and family, taking photos, and as a result managing them, became rarer and rarer for 2020&2021. So it's been a while since I
• Photostory

  6 answers, most recent on 6/30/2021

  Travel maps 1.0.1.385 - Location names overwriting each other
  I have locations on a trip that are close together and when the travel route is played the names overwrite each other (e.g. Hong Kong Island, Macao and back to HK Airport 3 - waypoints). The trip covers Canada, Alaska, Hawaii, Japan, Hong Kong,
• Movie Studio

  12 answers, most recent on 5/28/2021

  RE: Magix movie edit pro premium 2020
  I have now installed a more powerful graphics card and MEP is working ok with no crashes. I have another problem however ( I think it's a problem). Whilst I was opening up MEP there was a power cut in somuch that my consumer unit was tripped. On