• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  @mark-perry Hi I can find very little information on the discs you are using, how old are these discs? The date label on the package would suggest they quite old disks, and if they are made by the same manufacturer as other MPM discs I could find,
• Movie Studio

  61 answers, most recent on 7/25/2024

  RE: My MAGIX software will not cut a DVD to Disc
  @ericlnz Hi Eric. The ASUS Drive I found was the same device that @rickduley has as a Generic DVD drive and not your Blu-ray recorder. @AAProds Hi Al. The printed specs for the are. Model: GU90NCondition: Brand NewType: 8X DVD BurnerLoading: Tray
• Video Pro X

  68 answers, most recent on 3/27/2024

  RE: codec cost
  @johnebaker, understood. Activating the codec in Vegas Pro allowed the same codec to be activated in VPX. @CubeAce, I never paid attention to the codec activation, but I do "need" it since I do edit video where that codec is used by the editing
• Other products

  7 answers, most recent on 4/15/2023

  RE: Which Magix video programs will import MKV files directly?
  Thanks, I’ll try this! I used to use TS Edit which was expensive but it has died too. Best thing about it was it would split MKV files convert to whatever but NO audio loss… all the converters these days seem to limit audio to 160k… I absolutely
• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  F F and F. i still getting nowhere with IMGburn it still keeps doing the process (using emmrecs img guide) and spits out empty discs. i tried the 'create a dual layer dvd' guide using the files at the slow burn speed but even that completely used
• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  @mark-perry Hi . . . .  using the external DVD burner . . . . noted the speed changes presumably when each file or sector was written . . . Which one, according to a previous post you have 2: LiteOn eUA108 - I can find no info on this model, is it
• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  IMGBURN verify - Verbatim 5 pack (not printable surfaces) - MID: MKM-003-00 * the mpms are still no luck guys, create an IMAGE success but couldn't go to disk with external CD XP Burner even at 1 x speed. * i hadn't quite worked out or touched
• Movie Studio

  15 answers, most recent on 7/5/2024

  RE: Puting finished movie with Title Page + chapters onto a USB stick ?
  @VHS_guy_2019 Yes, the great DVD conundrum. It really is a pity that there is no practical way of replicating a DVD to be played from a USB stick on a TV. However, you have deduced the various replacement options, and Magix will easily and quickly
• Movie Studio

  61 answers, most recent on 7/25/2024

  RE: My MAGIX software will not cut a DVD to Disc
  @rickduley Hi Rick . . . . Sorry to be a drag John E but this is all above my pay scale. . . . Not a problem. . . . . older programs would have been compatible with the older nvidia driver for the GT 730 . . . . Certainly, VPX 16 is not capable of
• Movie Studio

  44 answers, most recent on 1/17/2025

  RE: Making Blu-rays
  Sorry if I’m posting this in the wrong spot but I desperately need advice please. i’ve been interested to read all of the above thread, some of which seems pertinent to my own situation, however I’m sorry I have nothing to offer. I’ve been using
• Movie Studio

  No answers, created on 5/21/2023

  Cannot burn a DVD.
  I have used Movie Edit Pro 2013 for several years to make DVDs of my vacations. Recently I purchased Magix Movie Studio 2023 Platinum to enhance my endeavors. Being familiar with the basic concept I quickly assembled my photos and sounds for my
• Movie Studio

  8 answers, most recent on 9/6/2023

  Magix 2024: dvd plays on PC but not on dvd players!
  I have created many test files with Magix 2024. The DVDs I create play fine on my PC and other PCs but will NOT play on DVD players hooked up to TVs. I have tried many different things. I have burned the DVDs with Magix. I have created the files
• Movie Studio

  13 answers, most recent on 12/7/2022

  RE: Cannot burn movies to: DVD, Blu-ray or AVHD on Movie Studio 2023 Suite
  @David-Kendall Hi David. You may want to go for a burner that is a certified External USB 3. 0 Blu-ray BDXL/UHD Recorder such as this one. Ray.
• Movie Studio

  10 answers, most recent on 1/4/2023

  RE: 4k blu ray support
  @Puck1263 Hi . . . .ASUS BW-16D1X-U. It seems to have the right write specs. I told the guys at MicroCenter what I wanted to do and that is what they pointed me to.  . . . From the specs, the burner you have cannot play 4K UHD discs, nor is it 4K
• Movie Studio

  10 answers, most recent on 1/4/2023

  RE: 4k blu ray support
  @Puck1263 Hi, I am quite sure that your ASUS BW-16D1X-U will not burn to UHD, only full HD. As well, it doesn't look like it can read/play a 4k Blu-Ray video. Do not confuse being able to burn a video file that is 4K and creating a 4K Blu-Ray
• Movie Studio

  51 answers, most recent on 1/30/2024

  Dual Layer DVDs - atrocious luck or is just my project
  Project all done, burned as an IMAGE not a physical test: files play fine. (MEP 2020) then attempted to burn to a DL dvd just doesn't want to do it. after the initial failure i even made the size smaller maximum size but that didn't work. i even
• Movie Studio

  44 answers, most recent on 1/17/2025

  RE: Making Blu-rays
  I've just tried burning the project again, this time using the H.264 codec and the USB as the directory for the encoding. I had an unused BD in the burner which is plugged into my laptop via a USB connection. After a couple of hours the procedure
• SOUND FORGE

  4 answers, most recent on 12/11/2022

  RE: Timeline for DAO creation
  1. Is the CD burner (drive) listed (Tools> Burn disc-at-once audio CD).Yes. MediaMonkey was able to read it when I extracted it. 2. You can name the CD tracks in "View> Metadata> Track list" or Right-click the CD track on the timeline and
• Video Pro X

  5 answers, most recent on 6/12/2023

  RE: Burning a DVD
  @rdealmeida12 Hi Bob Thanks for the burn log info. Assuming the folder C:\Users\Bob\Documents\MAGIX\Video_Pro_X4\Disc Images\DVD Image 2023-06-10 containing the VOB, IFO and BUP files, is there then the cause of the failure is either: You Antivirus
• Movie Studio

  10 answers, most recent on 1/4/2023

  RE: 4k blu ray support
  @Puck1263 Hi, First off, Magix Movie Studio is a rebranded Magix Movie Edit Pro and is not at all like the Vegas product. It has more features that Vegas MS had, missing a couple of Vegas MS features but there is usually a different way to do it,
• Photostory

  One answer, on 8/11/2023

  RE: Error in module KERNEL32.DLL of MAGIX PhotoStory on CD & DVD 10 Deluxe
  @James-Hellyer Welcome to the Magix user to user forums. First, I hope you realise that the version of the program you have is now quite old? The latest is version 22. Second, that error message suggest there is a problem with your Windows
• Audio Cleaning Lab

  5 answers, most recent on 11/4/2022

  ACL 2013 Doesn't See USB CD/DVD Burner
  Running in Windows 10. It hasn't been an issue, before, it just started. I've click on everything I know to click. Can't figure it out, at all. Other programs on the computer see the burner/player, but Magix doesn't, anymore.
• Movie Studio

  30 answers, most recent on 3/4/2023

  RE: Movie Studio 2023 vs Vegas Edit 20
  @Former user I have VMS 16 Platinum. I opened it once and uninstalled. It's Vegas but with a lot of the editing features missing. Vegas can be overwhelming with all the options, and VMS was for those not looking for "ultimate" control, but once you
• Movie Studio

  13 answers, most recent on 12/7/2022

  RE: Cannot burn movies to: DVD, Blu-ray or AVHD on Movie Studio 2023 Suite
  @David-Kendall Hi 2022/12/06 10:06:29 [INFO]    [DiscMaker]: Step 4 of 5, Creating DVD image...2022/12/06 10:06:29 [INFO]    [DiscMaker]: Step 4 done The encoding process is complete so the issue is not the program. 2022/12/06 09:56:11 [WARNING]