• Video Pro X

  8 answers, most recent on 3/31/2022

  RE: will not start after reinstall
  Yesterday when I turned the computer off it was working properly. I finished an editing session and then shut it down. This morning I try to start the program and it will not start (by the way Photostory 2022 will not open either, but it says it is
• Music Maker

  20 answers, most recent on 4/18/2022

  RE: ACCESS_VIOLATION
  Ok you are right Jeff I will not do this because I tried a trick it is not the greatest trick but so far I found a work around! I shut off wave link before I start Music maker 2022 & it lets me start it without the error then I turn back on my
• Movie Studio

  25 answers, most recent on 3/9/2022

  RE: Fades quit working suddenly, error messages trying to re-install app
  @Roger-Lewis Hi Roger and welcome to the user to user forums. Updates can mean changes to an existing project can happen when re-opened after a program 'update' with the inevitable code changes that happen within the program. It would normally be
• Movie Studio

  13 answers, most recent on 2/19/2022

  RE: [Closed] Moviestudio Platinum 2022 does not work
  @Martin-Sotelano Hi . . . . standard HD video 1920 x 1080. Sources MP4 and MOV. . . . Thanks for the information. . . . . Intel(R) Core(TM) i7-4800MQ  . . . .   You should be able to improve the performance as follows: Ensure Hardware Acceleration
• Movie Studio

  13 answers, most recent on 2/19/2022

  RE: [Closed] Moviestudio Platinum 2022 does not work
  @Martin-Sotelano Hi . . . . standard HD video 1920 x 1080. Sources MP4 and MOV. . . . Thanks for the information. . . . . Intel(R) Core(TM) i7-4800MQ  . . . .   You should be able to improve the performance as follows: Ensure Hardware Acceleration
• SOUND FORGE

  10 answers, most recent on 2/19/2022

  How do I turn the limiter off when recording?
  I recently upgraded from Windows 10 to 11 on my recording computer. After the upgrade, there is a limiter in place when I record and I can't figure out how to set that back to no limiter, like it was before. I use Soundforge Audio Studio 12.6. Can
• Movie Studio

  43 answers, most recent on 2/15/2022

  RE: Does MEP offer the feature of adding 'boxing-arena' style light flare?
  I normally film in what my phone calls 4k 3840x2160, but this is one i forgot to turn it back from 8k after trying it out, I don't use 8k, partly because it's unnecessary for Youtube but also because the wide angle doesn't work in 8k, i tend to film
• Movie Studio

  14 answers, most recent on 2/14/2022

  RE: Could not connect to selected device
  Hi again, Sorry to bug you. So, I turned off my computer last night and I tried to access the camera again this morning it reverted back to Canon and no Microsoft DV. I check my driver and re-installed it just in case but now I am back to square
• Movie Studio

  21 answers, most recent on 2/10/2022

  Why does my timeline mode look weird?!? Need help ASAP please!
  My timeline mode looks weird and I can't turn it back to how it was before. It's not that i'm in storyboard mode or sceneoverview mode. I don't have what Magix calls "Handles" anymore. (The white adjustive points on each side of the piece of
• Movie Studio

  20 answers, most recent on 1/19/2022

  RE: Movie edit pro 2022 V 21.0.1.111 crashes/blocks (= unworkable)
  Helly guys!Here my responses on your comments: @John- I've installed: Studio Driver 511.09 (30.0.15.1109) - Jan 4, 2022 (this is REALLY new!). It is always a good idea to use more recent drivers. Mine was still a Microsoft one. @Ray- MediaInfo: yes,
• Music Maker

  13 answers, most recent on 12/30/2021

  RE: I can't stop a looping sound
  @DovidNachshon-Albright I even restarted my computer ... to no effect; Did you just shut down your computer and turned it back on or did you restart it? There is a difference. A shutdown just saves your current system status and loads it back again
• Movie Studio

  10 answers, most recent on 12/22/2021

  RE: Program Crashing
  @Daneane71 Hi, i was curious about this, so searched 'Exception 0xc0000005 "ACCESS_VIOLATION', the're plenty of posts online about it but it varies with no obvious solution, a lot seems to be about ram memory but someone better than me will
• Other products

  28 answers, most recent on 12/19/2021

  RE: Windows Software to import Video with a Canopus ADVC110
  @Jeff-Reed When using the Panasonic ES15, are you using the Es15 as a throughput device only (post VCR output), or are you actually recording a DVD, and subsequently exporting that DVD recording to your computer? Only as throughput/passthrough. The
• Movie Studio

  20 answers, most recent on 12/14/2021

  RE: New Processing Challenge
  @johnebaker @browj2 Hi john. Yes, I found the same CPU GPU usage, possibly because most of the work involved is using mainly 3D graphics more than video encoding / decoding / copying. The main difference is my Intel GPU was bouncing back and forth
• Video Pro X

  35 answers, most recent on 11/27/2021

  RE: Interpolate intermediate frames
  @Derek-McArthur @Scenestealer @johnebaker Hi all. I am about to eat humble pie. I just opened a project created in MEP 2022 before the last patch. It does have interpolation applied to every clip. Zooming in and looking at individual frames I can
• Sequoia

  2 answers, most recent on 11/19/2021

  [Closed] Sequoia V16 and audio hash
  Hi all,   I'm having an issue that I've never run across. I'm a long time Sequoia user (since V7) and have recently upgraded CPU to Windows 10 and Sequoia Version 16. I'll list the system specs below. When I am recording, every so often the audio on
• Video Pro X

  122 answers, most recent on 11/21/2021

  RE: Proposed new computer specs for using VPX
  @johnebaker Hi John EB, The HDD was nowhere to be found. As it turned out, it wasn't plugged in to the power, nor had they downloaded and installed the drivers. The only thing that I haven't figured out is the remote for the fancy lights on the
• Samplitude

  19 answers, most recent on 11/2/2021

  RE: Acid Music Studio
  Best Buy had a boxed version of the 2. Inside was the Key card and installation card. This morning I turned music studio on and went to help. I saw download instruments and loops and did it but no additions to the screen as it shows on back of box.
• Movie Studio

  18 answers, most recent on 10/3/2021

  RE: Lagarith Lossless Codec
  @jak.willis Video compression is a compromise with size. The more compressed a video is, the more data has been "thrown away" as well as more complex encoding with various types of frames, as Cubeace has described). LAGS is one of the so-called
• Movie Studio

  5 answers, most recent on 9/18/2021

  RE: I hate some of the changes brought in by Movie Edit Pro Plus!
  @Kiefer-Charlesworth Hi. I think you should still have access to your previous version of MEP in your magix account. To start to add key frames to the new version of size position rotate and activate the 'add key frame' just try turning one of the
• Movie Studio

  23 answers, most recent on 9/16/2021

  RE: Sound and volume problems
  @Arkadiusz-Marzec Hi. Personally I don't think it is a bug as I can't replicate the problem. I played four copies of the same file in sync and apart from having to reduce the gain of each channel by -12db to compensate for the additional volume of
• Movie Studio

  23 answers, most recent on 9/16/2021

  RE: Sound and volume problems
  @Arkadiusz-Marzec Hi. Thank you for all the additional pictures and further explanation. If your project is on the E: drive it is too full. It is why the bar has turned red. You need to create at least a 10GB space or preferably nearer 20GB
• Movie Studio

  23 answers, most recent on 9/16/2021

  RE: Sound and volume problems
  @Arkadiusz-Marzec Hi. Thank you for all the additional pictures and further explanation. If your project is on the E: drive it is too full. It is why the bar has turned red. You need to create at least a 10GB space or preferably nearer 20GB
• Movie Studio

  23 answers, most recent on 9/16/2021

  RE: Sound and volume problems
  @Arkadiusz-Marzec Hi. Thank you for all the additional pictures and further explanation. If your project is on the E: drive it is too full. It is why the bar has turned red. You need to create at least a 10GB space or preferably nearer 20GB