• Photostory

  21 answers, most recent on 3/12/2020

  RE: Photostory Burn disc will not play on DVD player
  @Philip-Hall Hi . . . . Maxwell DVD+R . . . . I presume you mean Maxell DVD+R. I would suggest you try a different brand as I have had many issues with Maxell discs in the past. eg Verbatim or Ritek. Personally I use Ritek DVD full face printable
• Photostory

  21 answers, most recent on 3/12/2020

  RE: Photostory Burn disc will not play on DVD player
  I tried a DVD-R disc. Same result. Did not work.
• Photostory

  21 answers, most recent on 3/12/2020

  RE: Photostory Burn disc will not play on DVD player
  Yes, my version is 19.0.2.46. I will run out to the store to get some DVD-R discs and give that a try.
• Photostory

  21 answers, most recent on 3/12/2020

  RE: Photostory Burn disc will not play on DVD player
  @Philip-Hall I am using Maxwell DVD+R From personal experience I have found that DVD-R tend to be "more reliable" for single-layer (4.7 GB) discs, whereas DVD+R seem "better" for dual-layer discs (8.4 GB). I've never used discs from Maxell. Also can
• Photostory

  21 answers, most recent on 3/12/2020

  RE: Photostory Burn disc will not play on DVD player
  I am using Maxwell DVD+R; 4.7 GB, 120 min., 16X
• Video Pro X

  9 answers, most recent on 4/16/2020

  VPX Setting, Adjusting and Analyzing Loudness - Plugins
  Discussion on Adjusting and Checking Loudness in VPX11 The Peak Meter in the Mixer of VPX is difficult to work with for any accuracy; there is no indication of actual levels other than the blinking or steady lights. Finding peaks and knowing the
• Photostory

  4 answers, most recent on 2/8/2020

  RE: Trying do burn a DVD
  Windows 10. we are burning a basic DVD, when we try on DVD player it says incompatible. I think we are using DVD-R
• Other products

  One answer, on 2/7/2020

  [Closed] DVD Architect Error - The drive has received an illegal command
  I recently updated to Vegas Pro 17 and the newest version of DVD Architect. I have burned many DVDs from previous versions of DVD Architect, but now when I try to burn with the new Architect version, the burn errors out with the following message. I
• Video Pro X

  5 answers, most recent on 1/20/2020

  RE: Burning a dvd disc to play on a dvd player to watch on a TV monitor
  @JAMES-COLLINS Please guide us through your steps and selections when creating the DVD. As you have still not provided any relevant details, helping you is still pretty much a guesswork. But your information that the DVD works on PC and BlueRay
• Photostory

  4 answers, most recent on 1/20/2020

  Retrieving photos
  Once I have created a DVD-R photo slideshow, are the images able to be retrieved by me, particularly on my older slideshows. I have used several Photostory editions, 10 deluxe, 2013, 2016, 2019, 2020. My computer operates on windows 10
• Photostory

  18 answers, most recent on 3/14/2020

  RE: playback limited to area restriction
  I have the same problem. I followed directions and burned a DVD-R for a DVD player. (I used to use windows movie maker until microsoft stopped supporting it) This is very similar so it was fairly easy for me to do. However, the burned DVD plays on
• Video Pro X

  5 answers, most recent on 1/11/2020

  Ongoing issues with VPX 17.0.3.63
  Have a problem with rendering to DVD with New PC.  (Stats below) It also has the latest bugs that annoy me, loose my transitions when moving a clip….  Intermittent preview screen.. audio tab… Here is a job stopper issue.  No matter how I adjust the
• Photostory

  18 answers, most recent on 3/14/2020

  RE: playback limited to area restriction
    ZZZ     I am using Dynex DVD-R 16x. Attached default gives option to use PAL. I thought that the USA had a different format for DVDx. Also the only option other than Blue ray are for CRT TVs, which are almost nonexistent in the USA Again thanks
• Photostory

  18 answers, most recent on 3/14/2020

  RE: playback limited to area restriction
  @George-Felton Hi George . . . . CD button, Only other two choices are Blue Ray which I do not have Use DVD-R disk . . . . From the above you are creating the wrong type of disc, ie a Video CD (VCD) - this format is not supported by many DVD players
• Photostory

  18 answers, most recent on 3/14/2020

  RE: playback limited to area restriction
  CD button, Only other two choices are Blue Ray which I do not have Use DVD-R disk, Thanks so much for your patience.   George
• Photostory

  18 answers, most recent on 3/14/2020

  RE: playback limited to area restriction
  @George-Felton Hi . . . . hoping you can help identify what I am doing wrong . . . . Hopefully we can help you, however we need specific information:- . . . . the steps as they appear in the burning process . . . At each of these steps there are
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @CubeAce Hi Ray . . . .fans can suffer from dust . . . . Bigger fans are better - they shift more air at a slower speed and are easier to clean. My power pack and the case fans(2) are all 5" and you do not hear them running when the internal case
• Movie Studio

  11 answers, most recent on 11/15/2019

  RE: imgburn
  @dpewit Hi Darek From the logs E r r o r :   8 4 F a i l e d   t o   o p e n   f i l e   i n   < m d a C o u n t F i l e P a c k s > :   C : \ U s e r s \ J o h n \ D o c u m e n t s \ M A G I X \ M o v i e   E d i t   P r o    E r r o r :   8
• Movie Studio

  11 answers, most recent on 11/15/2019

  RE: imgburn
  2019-11-10 19:11:54.482:   DLLAV32.DLL loaded, all entry points available2019-11-10 19:11:54.609:   AVSDK MsgCbFunc registered2019-11-10 19:11:54.610:   AVSDK: StatCbFunc registered2019-11-10 19:12:06.809:   AVSDK Version 13.0.2472019-11-10
• Movie Studio

  3 answers, most recent on 10/30/2019

  RE: Sync issue with MEP 17 and variable bit rate mpegs.
  Thank you for your quick response John v. 17.0.3.178 upd 3 Here is the analysis from one of the vob files. Does the following provide enough info: General180506)\VIDEO_TS\VTS_01_2.VOBFormat                                   : MPEG-PSFile
• Video Pro X

  11 answers, most recent on 10/21/2019

  RE: Remove video noise
  I still can't work out why anyone would want to "Render"Just export the video to the format of your choice (WMV or MP4) then preview from there.You can then use that video to produce DVD if you wish. Rendering takes a long time to then have to
• Photostory

  8 answers, most recent on 10/9/2019

  RE: PhotoStory does not recognize external DVD RW Drive
  @Michael-Nicoletti Hi . . . . CD format: DVD -ROM/-R/-RW/+R/_R DLCDA CD ROM/-RW, VCD . . . What make/model is the drive? John EB
• Photostory

  8 answers, most recent on 10/9/2019

  RE: PhotoStory does not recognize external DVD RW Drive
  For what it's worth the little documentation the external drive came with, it says it supports " CD format: DVD -ROM/-R/-RW/+R/_R DLCDA CD ROM/-RW, VCD. I uninstalled and reinstalled PhotoStory and it still does not recognize the external drive.
• Photostory

  One answer, on 9/11/2019

  RE: Making a DVD
  @William-Mitchell Welcome to the Magix forums. DVD created in Photostory will not play on all players. Why? Absolutely no idea, without a lot more information from you. This pinned post will give you some idea of what we really need to know if we