• Music Maker

  One answer, on 11/8/2019

  RE: prøver på nytt på mitt språk (Norsk)
  @Morten-kaarvand Thank you for taking my advice to post in your native language. Google translates your question as: I tried on a post in English, men who are now Norwegian. What I said was after restoring my PC to my factory setting habit m, m,
• Music Maker

  One answer, on 11/8/2019

  prøver på nytt på mitt språk (Norsk)
  Jeg prøvde meg på et inlegg på engelsk, menn som nå er Norsk. Det jeg sa var etter å ha gjonnoprettet pcen min til fabrikkinnstillinsvant mitt m,m,jam. Jeg hadde mange,mange musikkstiler. Jeg gjorde dette en gang tidligere og da klarte jeg på et
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @Scenestealer Hi Peter. I can't argue against your logic as I have no experience yet one way of the other. All I know is my i5 system was working like the clappers and was still slow to render by comparison. The i9 at present only seems to be
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @Scenestealer   Hi Peter.   Hi Ray MEP is using my graphics card a lot where there is titling on playback or where any effect using background masks except transitions and it's those point where I get stuttering playback. Yes, the new engine should
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @Scenestealer Hi Peter. I let the Intel installer do its thing. In the past it has aborted on my old system if it detects the wrong version is about to be installed so I think it's safer. That's why I used the exe. folder version. Windows 10 is
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @Scenestealer Hi Peter. I updated the Intel DCH driver to 26.20.100.7212 manually using the recommended exe. file version. But before I did I timed a render and a few other things like noting any lag in MEP when in use and wrote timings down. Then I
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @johnebaker @emmrecs Hi John. The only use I found for ticking the 'Don't Play Out' box was when I wanted MEP to shut down my PC if I left it on to render overnight. Without ticking the box when I then next opened MEP it would tell me it had crashed
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @Scenestealer Hi Peter. I had checked both sites. I looked at the Intel drivers and on the Asus site about warnings on updates. Hence I'm not touching that side of things for now. It can wait. I also have the page for their tool. Have you looked at
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @Scenestealer Hi Peter. It was cheaper to buy it assembled than I could find on prices when the parts were to be bought individually and I had a good look around. The ram would have been twice as expensive on its own compared to what they charged
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @CubeAce Hi Ray I'm not sure whether I made it clear within this thread or not but I bought my Motherboard, CPU, ram,and heat pipe heat sink as a per-assembled and tested package. I checked versions of the bios with those on the Asus site for the
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @Scenestealer Hi Peter. I've just seen this post.   Just added a missed step in Bios mentioned in my earlier post (to ensure Quicksync functions in a multi GPU setup) for clarity. I will check that as soon as I put the M.2 modules in. Possibly next
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
    Hi Peter. I'm not sure whether I made it clear within this thread or not but I bought my Motherboard, CPU, ram,and heat pipe heat sink as a per-assembled and tested package. I checked versions of the bios with those on the Asus site for the ROG
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  Hi Peter. I am one bios update behind the current one but will leave that alone for now until I'm completely sure about my bios settings. This is something I do not do on a regular basis and not going to play with until I am sure. Both monitors are
• Movie Studio

  21 answers, most recent on 10/5/2019

  RE: Need help with new computer specs
  As for ram speed, I think my son said any DDR4 ram clock speeds should be sufficient for video editing. Maybe someone else can confirm that. No, the motherboard you are using should have a list of recommended RAM make and specification that you
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @johnebaker Hi John. I've been playing before I saw your reply. I wasn't sure it would work but I unplugged the HDMI cable from the NVIDIA card and put it into the Motherboard HDMI input and switched on half expecting the machine to fall over on
• Movie Studio

  21 answers, most recent on 10/5/2019

  RE: Need help with new computer specs
  @Scenestealer I think we are all confused as to what does which bit and when. Quite a bit of my new system seems overwhelmingly underused when exporting but it's still tons quicker than my old system without breaking a sweat. From what I'm reading
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @terrypin@terrypin Hi Terry. Thanks for your thoughts as normally one reply kicks of another one and one thing I've learned over time is what works on one machine doesn't always work with another machine. Too many variations in PC building and
• Music Maker

  No answers, created on 9/21/2019

  Im going crazy...
  So.. I recently bought a computer for my 11 year old son to play on. It was installed and had MMM v24 on it and he really started to love doing loops and music and now I bought him a mic and everything is going to h#ll! I have tried everything to
• Music Maker

  3 answers, most recent on 9/23/2019

  RE: No sound from other programs with MMM
  Thank you for the timely response John. Well, I don't have a CD burner so I'm not terribly worried about that. Are there other issues I should be concerned about? One bit of an anomaly is that I also have a Laser Harp device attached (via USB) that
• Movie Studio

  19 answers, most recent on 9/15/2019

  RE: Disabling Automatic Project Save - Advice Please
  @johnebaker Hi John. The motherboard was losing the C: drive raid settings and drives. And kept rebooting. Stripped the machine down. Took out graphics, all drives etc. Then added just the C:drive and plugged one monitor into the motherboard. Got it
• Samplitude

  No answers, created on 9/14/2019

  YT Acoustic Piano Reso XA0
  je ne trouve pas ce fichier pour avoir du son avec samplitude
• Movie Studio

  19 answers, most recent on 9/15/2019

  RE: Disabling Automatic Project Save - Advice Please
  @browj2 Hi John. My original source files are placed on a main storage drive (external) with another copy made at the same time to another external drive which is only connected to the PC whenever I upload new material or do backups and is then
• Movie Studio

  4 answers, most recent on 2/27/2019

  RE: Uncompressed video file size
  @Richard-hardy All I can say is good luck with that.😃 My son, who designs mainframe computers for a living and is also a fully qualified Microsoft engineer and a keen videographer, doesn't even understand the compression codecs involved. We are all
• Movie Studio

  21 answers, most recent on 2/19/2019

  RE: Can people please list their useful third party effects here?
  @browj2 Thank you so much for all those links, they are very much appreciated. I will be looking over those again and again I suspect and take weeks if not months to absorb them. I've calibrated both my monitors for stills work and not sure if I'll