• Movie Studio

  38 answers, most recent on 3/29/2020

  RE: compatability with windows 10
  John and Jeff, thanks. My knowledge on the whole computer thing is very limited,(it just seems like baffling magic to me) so I try to follow the steps carefully but then need to wait for my friend's assistance when he is available if I get stuck. I
• Movie Studio

  38 answers, most recent on 3/29/2020

  RE: compatability with windows 10
  @Andrew-Thompson do I understand correctly that you are using Windows 10 and are able to import video via the firewire into MEP? Yes, I can. Although my set up is somewhat different to yours, I run Win 10 1909 and can import, via Firewire, from my
• Movie Studio

  5 answers, most recent on 1/10/2020

  RE: Possible to use HDMI for video capture?
  If you cannot get the Firewire working, then as the HV30 has a Composite video/audio output you can use a USB video capture device such as a Terratec Grabby. with MEP. Yes but that would only give you Standard Definition video. HV30 records DV / HDV
• Movie Studio

  5 answers, most recent on 1/10/2020

  RE: Possible to use HDMI for video capture?
  @Andrew-Thompson Hi If you cannot get the Firewire working, then as the HV30 has a Composite video/audio output you can use a USB video capture device such as a Terratec Grabby. with MEP. @Andrew-Thompson@Andrew-Thompson Apologies and correction:
• Movie Studio

  38 answers, most recent on 3/29/2020

  RE: compatability with windows 10
  Hi . . . I understand correctly that you are using Windows 10 and are able to import video via the firewire into MEP? . . . On my old computer, not a Dell, running Windows 10 I was able to capture via Firewire from an old JVC camera. The procedure
• Movie Studio

  38 answers, most recent on 3/29/2020

  RE: compatability with windows 10
  I am pretty sure I did. When I get onto the pc again I will attempt to go through that install procedure again. So do I understand correctly that you are using Windows 10 and are able to import video via the firewire into MEP?
• Movie Studio

  5 answers, most recent on 1/10/2020

  Possible to use HDMI for video capture?
  Having reached a dead-end attempting to import video with firewire into Edit Pro 17 Plus on my Dell pc with Windows 10,(despite downloading Legacy firewire driver) I am now looking for alternative ways to capture video. Can I use the hdmi port on my
• Movie Studio

  38 answers, most recent on 3/29/2020

  RE: compatability with windows 10
  @Andrew-Thompson . . . . I can't seem to open that on my iPad . . . . You won't it is a link to a download, the iPad would not know what to do with it as it is a Windows installer file. . . . . recommended fix is to download a Legacy driver from
• Movie Studio

  38 answers, most recent on 3/29/2020

  RE: compatability with windows 10
  K, so a bit of online research has revealed the following: there is an issue with Firewire port compatability with windows 10. Apparently this mainly affects Dell computors....guess what I have? The information also suggests that installing a
• Movie Studio

  38 answers, most recent on 3/29/2020

  RE: compatability with windows 10
  @Andrew-Thompson Hi . . . Would the fire wire driver need re-installing? . . . . . I cannot record any video onto the programme I cannot test the functionality of the editing software, but to all intents and purposes everything else looks normal in
• Movie Studio

  38 answers, most recent on 3/29/2020

  RE: compatability with windows 10
  @Andrew-Thompson it may also be that the drivers for the camcorder/firewire is not fully compatible with Windows10. You can try running drivers - or even MEP, in compatibility mode for just the purpose of the capture process.
• Movie Studio

  38 answers, most recent on 3/29/2020

  RE: compatability with windows 10
  @Andrew-Thompson Hi Andrew. You say you have done this for years. Do you have the appropriate drivers for the firewire interface? Is your copy of MEP otherwise working OK? If you can see and hear the video on the Camcorder it's not dirty heads. It
• Movie Studio

  52 answers, most recent on 4/8/2020

  RE: Audio problem with playback of old .avi files
  Hi, to change for Cyberlink focusing on 365 plan or Adobe at least 4 times more costly than Cyberlink or paid for Pinnacle Studio 23 ultimate version or cheap no content Movavi, Filmora. Also you can try Resolve this is free but the learning curve
• Movie Studio

  52 answers, most recent on 4/8/2020

  RE: Audio problem with playback of old .avi files
  Thanks for hanging with me. Like I said, the file opened In VideoStudio x9 and Photoshop CC 2019 and audio was fine.I have 40-50 videos that were converted via firewire from analog Hi8 tape to file like 20 years ago, utilizing capture software
• Movie Studio

  52 answers, most recent on 4/8/2020

  RE: Audio problem with playback of old .avi files
  Thanks Ray. There was software that would "see" a firewire connection to a Sony Hi8 camera and let you transfer analog to digital back in the days of Vista, WIn98, and earlier. I have viewed and edited those files for years using several
• Movie Studio

  7 answers, most recent on 5/1/2020

  RE: Movie Edit Pro 17 won't recognise VIDBOX NW03 windows 10(now resolved)
  @mark-perry Welcome to the Magix forums. When you say you have "MEP 17" (which variant, btw?) can you tell us the exact version number, found under Help>About? There was a version "17" and a later version "2017", often abbreviated to 17, so
• Movie Studio

  10 answers, most recent on 11/5/2019

  RE: Importing HDV via firewire from Canon XH-A1
  @Steve-Young Hi . . . . I may need a different driver.  Apparently , the software does not recognize my camera as an HDV camera. . . . . Making a few assumptions: - Windows 7 is the 64 bit version Movie Edit Pro is the 64 bit version The drivers
• Movie Studio

  10 answers, most recent on 11/5/2019

  RE: Importing HDV via firewire from Canon XH-A1
  @Steve-Young Welcome to the Magix forums. First, you need to understand these are user to user forums, not Magix Support, so writing about "your software" is incorrect. If you wish to raise a support ticket with Magix Support, please use the Contact
• Video Pro X

  3 answers, most recent on 7/9/2019

  RE: Can't get Magix Video Deluxe 2019 Plus to import HDV from Sony camera
  Hi @slackerdan Are you selecting the HDV option when you launch the record via the red button in Video Deluxe? This should be preset with a record template for 1440x1080i ie the HDV format. If it has a DV format template then it might be that you
• Video Pro X

  3 answers, most recent on 7/9/2019

  RE: Can't get Magix Video Deluxe 2019 Plus to import HDV from Sony camera
  @slackerdan Hi From the information you have given ie transferring from camera via Firewire (i.Link) suggest that this is an older mini DV tape camera, in which case, from the mini DV cameras I have used, 720x480 (AR 4:3 or16:9) is the maximum
• Video Pro X

  3 answers, most recent on 7/9/2019

  RE: Can't get Magix Video Deluxe 2019 Plus to import HDV from Sony camera
  @slackerdan Welcome to the Magix forums. I honestly don't know the direct answer to your question but I suspect the solution is actually quite simple: basically, don't use the HDV Import method but rather copy the files straight from the camera to
• Video Pro X

  3 answers, most recent on 7/9/2019

  Can't get Magix Video Deluxe 2019 Plus to import HDV from Sony camera
  Hello everyone! I am trying to move video recorded on my Sony HDV video camera over to Magix Video Deluxe Plus Steam Edition using Firewire. I am recording in HDV format. I can set the I.Link Conversion to "DV" which allows me to send the video to
• Samplitude

  11 answers, most recent on 4/25/2019

  RE: Interleaved Recording - Pro X4
  Jeff, Understood, and appreciated. About merging stereo mic arrays - I didn't do a good job explaining this. If I have an X/Y or Blumlein pair over the conductor's head, that gets tracked to CH1 and CH2, then combined into a single stereo pair after
• ACID

  No answers, created on 4/13/2019

  Slight lag on playback
  I just upgraded everything in my system (brand new HP desktop, Win 10, Intel i5 processor, 12 GB RAM, USB 3.1, recording with a Behringer U-Phoria UMC22 USB interface into ACID Pro v 8.0.8), and I'm still getting a slight lag on playback - my audio